126,768 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x745x1100 mm Weight: 580 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4500x1500x2000 mm Weight: 6500 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3480x1500x2000 mm Weight: 5500 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x800x1350 mm Weight: 370 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3800x2100x2100 mm Weight: 3500 kg Total power requirement: 13 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1150x1120x1310 mm Weight: 650 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1100x1500 mm Weight: 300 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3980x1500x2000 mm Weight: 6000 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3480x1500x2000 mm Weight: 5500 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4200x1500x1500 mm Weight: 1050 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2260x2060x2230 mm weight: 3700 kg total power requirement: 57,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3225x1750x1200 mm Weight: 1200 kg Total power requirement: 16,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1480x580x1120 mm Weight: 280 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Plate dimensions: 3000x1350 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: 31,5 kW Specific pressure: 2,5-5,0 kg/cm² Total pressure: 90 t Motor output: 1,5 kW Dimensions (L/W/H): 3480x1500x2000 mm weight of the machine ca.: 5000 kg Year: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 630 mm Working height: 3-300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 0-16 m/min. Dimensions (L/W/H): 1200x1100x1160 mm weight of the machine ca.: 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate diameter: 3100 mm steady: 2 bed width: 4000 mm turning speeds: 200 U/min workpiece weight: 90.000 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hydrostatik Spindellagerung Hydrostatik Lynette The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your ...
x-travel: 500 mm y-travel: 200 mm z-travel: 400 mm table surface area: 700 x 300 mm tool taper: SK 40 - S20 feed: 8 - 400 mm/ min rapid traverse: in X und Z 1200 mm / min turning speeds: 40 - 2000 U/min total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser
RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year., Images shown might not reflect actual configuration.; Gross weight [kg]: 7436; Engine: Caterpillar C32; Accessories: Tanker, Control Panel, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000
Key data: 500 mm, 400 , 400
Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!
Key data: 500 mm, 400 mm, 400 mm
DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.
Key data: 800 mm, 650 mm, 650 mm
Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible.
Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move. With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges. 🔧 100% original Doka XP parts 📦 Ready for immediate delivery †incl. reusable packaging 💶 Full package for just €5,399.†(net) This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to. Expand now †before you hit the limit. The accessories are ready †you just have to grab them. 😉 👉 Ask. Decide. Go. Price: from € 5399,00 ...
✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗ï¸ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...
Still working with outdated formwork systems? Time to change that. The used Dokadek 30 panel formwork brings structure to your site and focuses on what matters: quick setup , clear workflows , and safe handling . Looking for a reliable formwork system for straightforward slab projects ? This is your chance: Buy Dokadek used †functional, robust, and ready to ship. Less lifting 🧱 , less searching 🔍 , less risk ⚠ †more focus on what really counts: moving forward. 🚀 ✅ Why Dokadek 30 (used) is worth it: ✔ Fast setup without beams ✔ Simple, intuitive system layout ✔ Minimal material variety †maximum efficiency ✔ Assembly directly from ground level ✔ Ideal if you’re looking to buy used slab formwork â³ Still thinking? Others have already placed their o ...
🔧 Stable, ready to use, and exactly what you need on site: 3 used Hünnebeck ID 15 towers , approx. 5.50 m high †including all components and H20 brackets for a safe working platform. 📐 Built for tough jobs: Ideal for beam support, slab formwork or as an add-on system on larger sites. Fits wherever support is needed. 📦 Quick and straightforward: Solid design, easy assembly †no fuss, no extras. just performance where it counts. ✅ Platform included: Equipped with H20 console †you’re safe at the top, no extra parts required. âž• Need more? We’ve got it: Additional used Hünnebeck ID 15 parts are available in stock †perfect for scaling up. â³ Limited availability: These ID 15 tower sets move fast †once theyre gone, theyre gone. 👉 Grab yours now and get the job do ...
The Doka Alu-Framax pallet is the smart storage and transport solution for your Alu-Framax formwork elements . ✔ robust & galvanised †built for maximum durability ✔ stackable & space-saving †perfect for warehouse & jobsite ✔ delivered folded †easy handling & compact storage ✔ available in 3-star and 1-star quality 👉 Minimum order: 3 pcs = 1 packaging unit 🚛 On request, we deliver your pallets directly †or you simply pick them up yourself and get started right away. Get your pallets now †before stock runs out! 🚀 Perfect for everyone who values quality, efficiency and order on site. Price: from € 125,00 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to us ...
📏 Compact & clever †the MANTO 1.20 m and 0.60 m! Need formwork for lower wall heights or looking to add flexibility to your setup? Then the Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡 💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁 And just like always: 📦 Accessories? Absolutely! Our warehous ...
This package includes all currently available Dokadek panels in 1-star condition †the smart solution if you want to buy used slab formwork that still gets the job done. Functional, ready to go, and optimized for practical use. 💡 Dokadek 30 is a frame-based slab formwork system without beams †lightweight, quick to assemble and ideal for covering large areas. Aluminium frames provide stability, while the plastic panel surfaces are smooth and easy to clean. 💪 Looking for Dokadek used panels with reliable functionality at a great price? You’ve just found them. 🎯 ✅ What’s in it for you: ✔ Frame-based Dokadek panels in solid working condition ✔ Lightweight components †aluminium and plastic combo ✔ Ground-level assembly †fast and efficient ✔ Perfect for simple, budget-focused site app ...
Cover Protective Cover for FP3 CNC - Splash guard booth for Deckel FP3 milling machines - Distance fastening screws: 910 mm - Dimensions WxHxD: 1270 x 1300 x 950 mm - Weight: approx. 80 kg
Key data: 610 mm, 500 t
From MTrent Machining Centers UE 110-5A Year of construction 2012 Diameter 610 mm With extended clamping surface 1100 x 610 mm Weight 850 kg
The machine comes from a warehouse liquidation. Unfortunately, no further technical information is available. It was not possible to check the function. The weight is approx. 2,500 kg.
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...
maximum number of results exceeded
please refine your search
