de coiler used for sale

Häner Demolition Grab HAGx16.23 black satin matt New for mini excavators from 16 - 20 t Opening width: 1,800 mm Tray width: 800 mm Overall height open with drive: 1330 mm Max. operating pressure on/off: 300 bar Net weight with swivel function: 1310 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 90 l/min Min. oil volume turn: 40 l/min Size Hoses Close/Open: 1/2\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-250

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-21

Equipped with 4-Cil. \"John Deere\" Diesel engine; 40km/h version; PTO: 540/1000 rpm; 2 double-acting hydraulic valves; hydraulic brake valve; tipper knob; adjustable tow bar; \"Mailleux\" MX 40.85 front loader; Auction-ID: A1-40138-149

Auction-ID: A7-46410-25

Auction-ID: A1-45771-69

Dell PowerEdge C4130 Memory (RAM): 128GB DDR4 ECC Registered(8x16GB 2133MHz) SATA Storage: 1x 240GB 1.8\" SATA SSD NVMe Storage: 1x 512GB NVMe M.2 SSD GPU: 4x AMD Radeon MI25 16GB HBM2 Processors (CPU): 2x Intel Xeon E5-2650 v3 PSU: 2x 1600W Dell 80Plus Platinum Auction-ID: A7-46739-3

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-17

Equipped with 3-point connection, PTO, support leg. Auction-ID: A1-40138-303

Empty Caddies Compatibility: Fits Dell PowerEdge 11th, 12th, and 13th generation rack and tower servers, including: R610, R710, R620, R720, R630, R730, R730xd, T420, T620, T630, as well as PowerVault MD1220 and MD3220 storage arrays. Auction-ID: A7-46739-65

Peripheral matters around do not belong to the lot Auction-ID: A1-46547-131

Own weight approximately 9000 kilos note without engine (originally there was a 6 cylinder 11093 cm3 engine with 149Kw power) approximately 40 seats (approximately 20 benches spread over 2 floors) right-hand drive paintwork optically still in good condition interior optically in good condition Auction-ID: A1-42017-6

Seaworthy Delta Patrol Super RHIB 1200 TX motorboat Brand: Delta Type: 1200 TX Year of construction: 2004 / refit 2024 Length: approx. 12.3 meters Width: approx. 3.3 meters Equipped with inverter, lighting and fire extinguisher Completely painted in two-component paint Equipped with new layer of antifouling Equipped with 2x 150 hp Suzuki 4-stroke outboard motors Motorcycles recently inspected and equipped with new anodes Former deployment: Coast Guard Curaçao Fully equipped with new tubes (Hypalon fabric 866) All-round equipped with double D-rubbers Slow traffic storage trailer included Boat is currently in the water Belongs to the higher segment of professional Super RIBs Excellent seaworthiness and offshore performance Very robust and proven hull design Suitable for professional use, events or high-performance private use Excellent base for refit or cust ...

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-19

SCARA WAVE INCORPORATED robot, complete with controller and pendant, approximately 1,600 hours of production, serial number WRS40L3SS1NNW19210027 Auction-ID: A7-46810-13

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-16

Dell PowerEdge C4130 Memory (RAM): 64GB DDR4 (4x16GB 2400MHz) SATA: 1x 240GB 1.8\" SATA SSD NVMe: 1x 512GB GPU: 2x AMD Radeon MI25 16GB HBM2 Processors (CPU): 2x Intel Xeon E5-2667 v4 (8 Cores, 16 Threads per CPU | 3.20GHz Base / 3.60GHz Turbo | High clock speed) PSU: 2x 1600W Dell 80Plus Platinum Auction-ID: A7-46739-56

Professional supermarket machine, version: standing model, suitable for PET bottles, small packages and crates, 10.1-inch screen, \"Tomra\" transport installation with sorting; Please note! Installation must be disassembled by the buyer Auction-ID: A1-40112-68

Desk approx. 80 x 160 cm Cabinet approx. 44 x 120 x 114 cm Conference table approx. 240 x 120 x 76 cm 6x leather chairs Whiteboard Auction-ID: A1-40112-158

Viewing by appointment only Auction-ID: A1-40256-64

Equipped with: engine: 3-cylinder diesel engine, power: 37.3 kW, fuel: diesel, hydrostatic 4-wheel drive (4WD), stepless travel speed (0-25 km/h), 3-deck rotary mower, cutting width: Maximum 285 cm to 330cm, cutting speed: 0-7 km/h., power steering, cabin, Dutch registration, Grammer seat. Auction-ID: A1-40138-192

Dell PowerEdge C4130 Memory (RAM): 64GB DDR4 ECC Registered(4x16GB 2400MHz) SATA Storage: 1x 240GB 1.8\" SATA SSD NVMe Storage: 1x 512GB NVMe M.2 SSD GPU: 2x AMD Radeon Pro W5700 8GB GDDR6 Workstation GPUs(High-performance rendering/compute) Processors (CPU): 2x Intel Xeon E5-2650 v3 (10 Cores, 20 Threads per CPU | 2.30GHz Base / 3.00GHz Turbo PSU: 2x 1600W Dell 80Plus Platinum Auction-ID: A7-46739-57

Buyer is responsible for disassembly on the collection day Auction-ID: A1-46547-130

Consists of: cabin parts, partially demolished cabin, brake cylinders still present, steering box, evaporator ect. See photos. Auction-ID: A1-40138-301

John deere 2140 turbo ; kipperknobel; top pull bar; top link; Auction-ID: A1-40138-234

Lot consisting of spray booth with pre-processing space without contents, complete disassembly is the responsibility of the buyer. Pre-treatment room with overhead door. Dimensions overhead door 3.50x3.20M (width x height). Dimensions pre-processing space approximately 10.00x7.20M externally. Pre-processing room can also be heated. Interior door spray booth leads to paint mixing room, this does not belong to the lot. Specified dimensions are without filter extraction system. All dimensions specified in the lot description are approx. Dismantling by appointment, in consultation with the client. Auction-ID: A1-46547-282

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-14

Häner Demolition Grab HAGx22.28 black satin matt New for mini excavators from 20 - 26 t Opening width: 1,930 mm Tray width: 1000 mm Overall height open with drive: 1400 mm Max. operating pressure on/off: 300 bar Net weight with swivel function: 1480 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 90 l/min Min. oil volume turn: 40 l/min Hose Close/Open Size: 1\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-255

Equipped with 6-Cil. \"Deutz\" diesel engine; PTO shaft 2 heads: 540/1000 rpm; 2 double-acting hydraulic valves; 1 x depressurized return; 1 single-acting hydraulic valve; lower drawbar; front linkage; front PTO; 1 single-acting hydraulic valve at the front; Be careful, sometimes jumps out of gear! Auction-ID: A1-40138-127

Häner Sorting Grapple HAGx8.12 black satin matt for mini excavators from 8 - 12 t Opening width: 1,502 mm Shell width: 605 mm Overall height open without drive: 833 mm Clamping force: 26.2 kN at 300 bar Max. operating pressure on/off: 300 bar Net weight with swivel function: 530 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 25 l/min Min. oil volume turning: 15 l/min Size Hoses Close/Open: 1/2\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-240

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-20

Equipped with 4-Cil. \"John Deere\" Diesel engine; PTO: 540/1000 rpm; 2 double-acting hydraulic valves; 10 front weights of 40 kg each; Auction-ID: A1-40138-150

Equipped with 6-Cil. \"Deutz\" diesel engine; PTO: 540/1000 rpm; Optitrac; Multispeed; Agrotronic; powermatik; 2 double-acting hydraulic valves; depressurized return; lower drawbar; Front linkage; front PTO; electrically switchable 4x4 / differential; adjustable handlebars; Auction-ID: A1-40138-68

Equipped with 4-Cil. \"Deutz\" diesel engine; PTO:1000/540; 4 double-acting hydraulic valves; hydraulic brake valve; depressurized return; adjustable tow bar; top link; fender control; \"MX\" T412 front loader; front linkage; Auction-ID: A1-40138-26

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-13

consisting of: John deere 220A reel mower (year 2000), trailer (interior dimensions: 1100x1100mm), K50 hitch, lawn tires Auction-ID: A1-40138-314

Degreasing equipment for the food service industry. For degreasing and washing filters, trays, pans, and dishes used in commercial kitchens. Operating temperature: 75 °C Auction-ID: A7-46808-18

Electric drive Foot switch actuation, Various tools are included in the delivery: 1 x top/bottom knife with radius 4 mm 1 x top/bottom knife with radius 6 mm 1 x top/bottom knife with radius 7 mm 1 x top/bottom knife with radius 8 mm 1 x top/bottom knife with radius 9 mm 1 x top/bottom knife with radius 15 mm (currently in use)

Skid mounted aluminium Benhil through with augers with drivework for the augers, small control panel with controls, fench protection above the through with augers for safe working and mobile outfeed Waukesha 034 lobe pump with motor ( ± 5,5 kW, estimated no name tag) and motorcover. Pump displacement per revolution: 0,227 liter. Pump maximum nominal capacity: 5.500 ltr/h. Pump inlet, rectangular, 1,75 x 6,75 / 44,5 mm x 171,5 mm and outlet, round, 2 / 50,4 mm. Pump maximum pressure range: 200 psi / 13,8 bar. Pump max speed: 400 rpm., Type of Machine: Through with augers with butterpump, Motor lobe pump: +/- 5,5 kW - 380 V - 50 Hz, Total dimensions: 120 x 120 x 210 cm, Weight: 200 kg

Overview  The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  Depalletizer with lift and discharge at the bottom With intermedeiate layer remover and magzine With slide for top layer/cover Enclosed conveyors can pull off single lane wise for shaped bottles Incl. protective fences, pallet transport, discharge table

max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:300 mm max. number of teeth:999 max. module:5 total power requirement:10 kW weight of the machine ca.:1.800 Kos. dimensions of the machine ca.:1300 x 1450 x 2250 mm The Gear Tooth Deburring machine ? ZEM 300 for deburring of splines gear wheels and shafts The advantages at a glance - Vertical workpiece spindle - Chamferring, debburing and smoothing - Simultaneous Processing of 2 Gears - Dry Processing - Repeat accuracy when adjusting the tools - Simple integrated Pick up swing arm or linear loader - Crane hook machine Workspace Swing Diameter: 300 mm Process Diameter: 300 mm Workpiece Length: 450 mm Main Spindle Spindle Flange: Zylindrisch D=120 mm Front bearing spindle: 100 mm RPM max: 1500 U/min AC-Synchronmotor: 50 Nm Clamping cylinder : pneumatic Clamping force (5 bar): 10 kN Working axis swing arm for chamferring tool Feed force: 3 kN Ball screw drive: 25x5 P ...

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...