de coiler used for sale

16011118 Note: The item is defective! Auction-ID: A7-46481-1053

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Total 20 boxes; partly arrived; Color Black Auction-ID: A1-46266-543

23019780 Note: The article is defective! Auction-ID: A7-46481-1067

brewing length: 2050 mm; size L: 2750 mm; size W: 950 mm; dimension H: 1500 mm; Auction-ID: A1-45502-230

Total 20 boxes; partly arrived; Color: White Auction-ID: A1-46266-542

Used and untested; 19043485 With accessories thermostat and fuel sensor 19043485 Auction-ID: A7-46481-109

Length 300 cm; with non-slip profile; and 35 pieces Douglas fence boards 15x150 mm; length 240 cm Auction-ID: A1-46266-500

17005020 Note: The item is defective! Auction-ID: A7-46481-1047

Equipment: Rear hitch, hydraulic sockets, enclosed cab Auction-ID: A1-45887-73

Dim. 20x140 mm spring 335 cm; 25x180 mm; length 365 cm; B-choice; Total approx. 13 pieces Auction-ID: A1-46266-506

16006334 Note: The item is defective! Auction-ID: A7-46481-1045

Estimated weight: 40 kg Approximate dimensions: 700x450x800h mm Auction-ID: A7-46655-14

Total 20 boxes; partly arrived; Color Black Auction-ID: A1-46266-546

For sale is a John Deere 318 municipal/garden tractor with extensive winter service equipment. Equipment: Enclosed John Deere cab with doors, glazing and windshield wipers hydraulic snow blade, working width approx. 1,400 mm Rauch salt shaker type 120 R Rotating beacon Hydrostatic drive Power steering Rear PTO electric front PTO / front PTO 2 hydraulic control circuits at the front Onan P218 2-cylinder petrol engine 18 hp engine power 279 operating hours Flywheel, stator and starter renewed The tractor is in a well-maintained, used condition. Cabin, doors, windows and wipers are provided. Snow blades and salt spreaders show signs of wear typical of age and use, in particular paint chips, scratches and corrosion in the area of winter service equipment. The machine is suitable for winter maintenance, farm and property maintenance, municipal maintenance work and use on farm ...

Equipped with leaf auger to leaf spreader, gauge wheels, flails, sensors. Auction-ID: A1-46064-96

Total 18 boxes; partly arrived; Color Black Auction-ID: A1-46266-547

Equipped with 540/540e/1000 rpm PTO, front weights, hitch linkage, Fender controls, air brake connection, K80 lower drawbar hitch, airco, Auction-ID: A1-46064-6

16006332 Note: Item is defective! Auction-ID: A7-46481-1024

Equipped with 540e/1000 rpm PTO, stub axles, wheel weights, hitch linkage, fender controls, K80 lower drawbar hitch, LED work lights, air brake connection, air conditioning Auction-ID: A1-46064-4

including bending rollers Auction-ID: A1-45502-90

Equipped with 540e/1000 rpm PTO, stub axles, wheel weights, hitch linkage, fender controls, K80 lower drawbar hitch, LED work lights, air brake connection, air conditioning Auction-ID: A1-46064-5

Platform capacity: 500 Kg; Basket size: 850 x 850mm; usable height: 580mm; tank capacity: 530 lt; Spray pressure: 3 bar; Power supply: 400 V; absorption: 17 Kw.Serial: Z 989 Estimated weight: 1200 kg Approximate dimensions: 2000x1800xh2100 mm Auction-ID: A7-46655-37

25023588 Note: The item is defective! Auction-ID: A7-46481-101

Various sizes; length up to 590 cm; B-Choice; pallet size 625x105x50 cm; B Auction-ID: A1-46266-512

21015148 Note: The item is defective! Auction-ID: A7-46481-134

Air flow rate: 550m³/h; condensing capacity: 36/44 l/d; condensate container: 8 Kg; operating hours: 1985; Voltage: 220V; power: 0.720 Kw; Temperature range: 5-30° C.Estimated weight: 90 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-46655-46

Length up to 590 cm ; B-choice; Pallet size 590x120x78 cm Auction-ID: A1-46266-503

2x Used and unchecked: 21069804; 21069802 3x Defect: 23053801; 24037255; 24037256; Auction-ID: A7-46481-1079

Total 20 boxes; partly arrived; Color: White Auction-ID: A1-46266-548

Ton 20000 liters DEWA Hertell KD12000 vacuum pump + new hydraulic motor Stainless steel rear valve Auction-ID: A1-45887-122

Electric chain hoist with steering wheel control. Serial: 61316402 Estimated weight: 30 kg Approximate dimensions: 600x600x500 mm Auction-ID: A7-46655-179

Used and untested; 19026081; Including 4 demolition hammers, operating instructions and transport trolley Auction-ID: A7-46481-139

The Alfa Laval - Ibex MOG 3040 is a self-priming positive displacement rotary lobe pump with sanitary design which can handle low and high viscosity products like dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: ± 2,5 liter per revolution. Maximum nominal capacity: ± 90 m3/h. Inlet and outlet connection: 101,6 mm SMS male. Maximum product pressure: 5 bar. Maximum pump speed: 600 rpm. The pump is used in a dairy for product pumping. The current motor with this pump is 7,5 kW - 1.465 rp ...

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip swi ...

Decanter centrifuge for thickening municipal, industrial and biological sludge, Additional title: Sludge dewatering system, Throughput capacity: 15000 l/h, Weight: 545 kg, Position: To be mounted on the customers substructure, Features: Operating platform

Decanter centrifuge for thickening municipal, industrial and biological sludge, Additional title: Sludge dewatering system, Capacity: 15000 l/h, Weight: 640 kg, Position: To be mounted on the customers substructure, Features: Operating platform

Water degassing module. Suitable for integration into existing control systems., Additional title: cold degassing, Capacity: 5000 l/h, Residual oxygen content: 0,03 mg/l, Column volume approx.: 300 l, Operating temperature: 95 °C, Operation / Control: PLC / visualization by customer, Material: Stainless steel 1.4301 (AISI 304), Base construction: Height-adjustable feet, Features: Two-chamber column; water pump; panel

Overview This grape de-stemming and crushing machine type BETA160R was manufactured by VEMA/ITALCOM. With a capacity of 16 tons per hour, it is ideal for processing large quantities of grapes (especially green grapes). The machine has already been dismantled and stored and can be inspected on request. Technical details  Capacity: 16 tons/hour Power supply: 200V Rated power: 3.3 kW Weight: 320 kg

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

Max load capacity 125 kg., incl. operation Demag DSM-C Auction-ID: A1-46666-573

Vita Airomat Dental Curing Device Auction-ID: A7-46327-129

clamping devices in different designs, various parallel panes, see photos for more details Dimensions: 900x800x400mm Auction-ID: A7-46619-298

Type PGHD 40 / 100-7000 Number of cylinders 4 pcs Lifting capacity: 4x100 kN: 400, Stroke: 100 Parallel lifting device Hyla-Lift, for tilt-free parallel lifting of tool tops in the event of extremely uneven weight distribution or column damage Auction-ID: A7-46619-390

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

With 2x monitor, speed and mouse, (1x) Dymo Labelwriter 450 Auction-ID: A1-45979-409

Sheet metal deburring machine - ESA touch panel - Incl. turbo separator - Incl. 3m feed table - Replacement tapes - Documentation Workpiece width 900 mm Workpiece height - max. 40 mm Feed speed mm/min Workpiece length 0 mm Control Total power requirement 35 kW Machine weight approx. 3.7 kg Dimensions LxWxH 6.0 x 2.35 x 2.2 Auction-ID: A7-46642-35

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-46642-62