128,269 used machines on RESALE, but how to find them? Machine Search
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.30 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 5000 mm weight max. in kg: 500 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: 700 x 500 mm Swivel range B-Axis: 0 - 180 ° Swivel range C-Axis: 0,001 ° max. table load: 350 kg center hole: 30 H6 mm T-slots: 7x 14H7 x 63 mm table turning speeds: 21,5 rpm tool magazin:: number of toolpositions: 32 pos. max. tool length: 315 mm max. tool diameter: 105 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 / 50 / 50 m/min feed speeds: 20.000 mm/min Feed force: X / Y / Z: 8 / 8 / 7 kN total power requirement: 50 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 6,5 x 3,5 x 3,5 m Documents: Chip-Tray: Coolantsystem: ...
x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm
x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor
surface area: 440 x 1000 mm no. of flutes: 5 groove width: 16 mm total power requirement: - kW weight of the machine ca.: 210 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/min drive motor: 0,55 kW total power requirement: 0,55 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 635 mm, 510 mm, 460 mm
CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions
stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: - kW tool adaptor: 88 length: 560 mm center height of top slides: 65 mm weight: 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed:3800 mm turning diameter over slide rest:3200 mm turning length:12000 mm faceplate turning speed range -stepless-:2 - 200 U/min max. workpiece weight:90.000 kg bed width:4000 mm 2 steadies
Key data: 500 mm, 400 mm, 400 mm
Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions
x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm control: Dialog 11 turning speed range - main spindle: 31,5-5.000 U/min power capacity - main spindel: 7,5 kW tool taper: SK 40 table surface area: Ø 500 mm Tool-Presetter:: 30 Stück feeds:: rapid travel ( X / Y / Z ): 6 m / min. m/min weight of the machine ca.: 4,3 t dimensions of the machine ca.: 3,5 x 2,4 x 2,2 L/B/H m Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,,2 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production ...
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...
Key data: 846 KW, 950 kVA, 400 V
Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool ...
Key data: 919 KW, 1800 1/min
This marine propulsion engine is rotating, removed due to re-motorization and has 15,580 turning hours turned after complete overhaul
Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
x-travel: mm y-travel: mm z-travel: mm weight of the machine ca.: 1.700 kg dimensions: 2000 x 1000 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136
x-travel: 2050 mm y-travel: 520 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC 430 2x 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are ...
This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.
This 5-axis RÃDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm à 855 mm à 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÃDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details.
This 3-axis RÃDERS RHP 500 vertical machining centre was manufactured in 2007. It features a machining range of 500 mm à 552 mm à 300 mm and a table size of 600 mm à 540 mm. The machine is equipped with a milling spindle that reaches up to 42,000 rpm and has a tool changer with 42 places. If you are looking to get high-quality machining capabilities, consider the RÃDERS RHP 500 machine we have for sale. Contact us for further details.
Key data: 1800 mm, 700 mm, 700 mm
Machine Details Stock-No. 1105-04035 Type of machine Machining Center - Vertical Make DMG LID MAHO Type DMF 180 linear Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time 1 month after order Freight basis ex Works Technical details X-Travel 1800 mm Y-Travel 700 mm Z-Travel 700 mm Control HEIDENHAIN TNC 530 INTC 530 table surface area 2600 x 600 mm table load 2 t turning speeds 18000 rpm taper ISO SK 40 Tool Change Unit 30-Fold Rapid Traverse 50 m/min Number of working hours 20000 h Spindle Hours approx. 6000 h total power requirement 36 kVA weight of the machine approx. 11 t dimensions of the machine approx. 4.40 x 2.45 x 2.65 m Additional information DECKEL MAHO DMG DMF 180 Linaer equipment 3 AXIS MACHINE Direct Weighing System IKZ 600 liters 40 bar Chip conveyor Operating mode 4 Ethernet card ...
maximum number of results exceeded
please refine your search
