127,544 used machines on RESALE, but how to find them? Machine Search
Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg
Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,33 kg | Pcs.
used
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm spindle turning speed range: 12000 U/min milling-head swivable +/-: control: Heidenhain type: Mill Plus table surface area: 1000x600 mm : elktr. coolant: chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 900 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 1,01 kg | Pcs.
Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|17 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,400 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion Type: P90 for shelf spacing: approx. 300 mm Total length: approx. 380 mm Cross-section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | Pcs.
Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
Specifications: Manufacturer: Dexion Type: P90 The scope of delivery includes: 01x Console for push-through protection, used Material color: sendzimir galvanized consisting of: 01x bracket, used 02x internal parts, used 02x hex bolts M10x25 02x nuts 02x washers Ø 10,5
Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: sendz. galvanized Truss type: 125|17 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,400 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load, and the hook heights the load-bearing capacity of the hook tab be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: sendz. galvanized Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load, and the hook heights the load-bearing capacity of the hook tab be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS
Batch intensive mixer with a maximum batch capacity of 1,250 l. / 3,600 kg, equipped with: Drum drive 22.0 kW (drum speed: 8.4 rpm), mixing star drives 2 x 22.0 kW (mixing star speed: 39 rpm), hydraulics power pack for discharge gate 3.0 kW, lubrication pumps 2 x 0.18 kW. Previous use: Production of ready-mixed concrete.
Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h -Drive: 3 kW Overall dimensions: 710/400/H290 mm -Weight: 92 kg
Sugar dissolving station Type Pulsmaster PI 7/7/10 Capacity: Contimol 6.000l/h
Technical data for the pallet racking system: Shelving system: Dexion Type: Speedlock P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 15,540 mm Number of fields / row of shelves: 05 pcs. á 3,000 mm Number of levels plus ground level: 04 pcs. Technical data on volume: Pallet spaces per field: 15 pcs. Number of pallet spaces per row: 75 pcs. Total number of pallet spaces: 75 Sck. started from: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max. ): 600 kg The scope of delivery includes: 06x pallet rack stand, used Material color: sendz. galvanized Profile credit: 90 x 70 x 2.0 mm Profile type: 90-200 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 8,000 mm high 1,100 mm deep 40x pa ...
5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.
7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.
11.45 M WIDE SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 11.46 m Shelf offer consisting of: 07 x frame approx. 200 x 60 cm, disassembled. 48 x truss approx. 185 cm. 24 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1205,00 € Net plus statutory VAT. You will receive an invoice with VAT.
13.36 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 13,36 rm Shelf offer consisting of: 08 x frame approx. 200 x 60 cm, disassembled. 56 x truss approx. 185 cm. 28 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1400,00 € Net plus statutory VAT. You will receive an invoice with VAT.
57 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 57 rm Shelf offer consisting of: 031 x Frame approx. 200 x 60 cm, disassembled. 240 x truss approx. 185 cm. 120 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 5885,00 € Net plus statutory VAT. You will receive an invoice with VAT.
Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories
Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg
Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg
Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg
Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, spiral conveyor, vibration filler, vibratory spiral conveyor, feeder-bowl -Manufacturer: Deprag, spiral conveyor vibration conveyor -Type: 0522-EP/0.75-1 -Connection: 230 volts -Transport dimensions: 500/420/H960 mm -Weight: 33 kg
Offered is a used D 36 S Delta Hybrid unit in good condition. If you have any questions, please do not hesitate to contact us.
A GM 35 S Delta Blower unit is offered. The blower stage is completely overhauled. The blower power can be adjusted to your needs. If you have any questions, please do not hesitate to contact us.
clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...
clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...
clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...
Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg
Technical data for the pallet rack beam: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack traverse, used Material color: orange Truss type: SLB 100|15 Box profile: 100 x 50 mm Agraffe: 5 HK (hook) Clear width: 3,000 mm max. load per pair of trusses 2,300 kg, at the same time. distributed load Shelf load only valid for combination with frame profile 90|20 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting
Signal columns, signal lights, signal lamp, control light, signal light column, light signal alarm system -Manufacturer: Deckma, signal light -Signal lights: 8 pcs, see photos -Signal horn: 2 tones -Dimensions: 450/290/H740 mm -Weight: 8.6 kg
DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...
Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Diesel particulate filter Deutz 04603903 F035D00908 1X04604124 11600013335527 GP3403702 20131106
Deutz TCD 6.1 L6 diesel engine with Miretti Ex conversion for a diesel cat mining etc. See pictures ! No mails are answered, what is the price! Ask for quotes, my phone number is on file! Won't give a price ! There are two engines available ! If you send me your email address, I can send you more photos !
planer, electric planer -Manufacturer: Black & Decker, electric planer type SR 600 -Speed: 14500 rpm -Nominal power consumption: 500 watts -Dimensions: 400/150/H140 mm -Weight: 3.3 kg
Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !
Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: DETA, charger type WE 24/64 S -Input voltage: 220 V 50 Hz -Power: 24 V/64 A -Dimensions: 455/380/H810 mm -Weight: 51 kg
Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...
Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Depa, air-operated double diaphragm pump -Type: DL25-FA EEE P -Flow rate: l/min -Discharge pressure: bar -Dimensions total: 340/240/H325 mm -Weight: 9.6 kg
max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > ...
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...
x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...
maximum number of results exceeded
please refine your search
