dc motor used for sale

pressure: 200 t stroke: 500 mm table:: 1000 - 800 feed down: 150 -280 mm/sec feed under pressure: 10 - 26 mm/sec feed up: 180 - 300 mm/sec table height over floor: 750 mm total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

Three-phase electric motor DUTCHI NL Type: DM 160 M2 ( DM160M2 ) Power: 11 kW Speed: 2935 rpm Voltage: 230/ 400 V amperage: 35.3/ 20.4 A New !' frequency: 50 Hz/ 60 Hz degree of protection: IP55 with flange

Key data: 13 KW, 1175 1/min

- Motor as shown in pictures - Technical data according to nameplate - Unused, mint condition

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive Built for sale, perhaps also for rent. Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; ...

technical data: Outer diameter: 302 mm Inner diameter: 125 mm Width: 250 mm

Ca. 40 tons new electric motors

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1560 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 800 mm Total width without motor: approx. 470 mm Conveying width: approx. 440 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ conveyor conveyor conveyor -powered Condition: Used Total length: approx. 10400 mm Plant consists of 4 segments Segment length: approx. 2600 mm Drive type: Chain drive Total width incl. motor: approx. 1350 mm Total width without motor: approx. 1130 mm Conveying width between rollers: approx. 900 mm Roll width: approx. 1010 mm Wheels/axle distance: approx. 165 mm Roll diameter: approx. 70 mm Web height: 100/ 50 mm Material: Steel Color: orange Stock: 10.4 meters Price per meter Conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for yo ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor curve 90° Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 2100 mm Total width inside: approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller spacing/ axle spacing: approx. 80/130 mm Steel frame Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (0.37 KW) Includes side guide Feet to be ordered separately In stock: 4 pieces Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tai ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: up to 300 meters Total width incl. motor: approx. 540 mm Conveyor width: approx. 450 mm Roll diameter: approx. 50 mm Roller spacing/ axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 300 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your c ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 57 metres Total width incl. motor: approx. 790 mm Conveyor width: approx. 710 mm Roll diameter: approx. 65 mm Axle spacing: approx. 125 mm Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Drive Type: SEW Motor Flat Belt Stock: approx. 57 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partn ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor/ conveyor conveyor/ rollers -with drive Year of construction: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Flat Belt Condition: Used Total length: approx. 90 metres Total width incl. motor: approx. 690 mm Conveyor width: approx. 610 mm Roll diameter: approx. 50 mm Roller spacing: approx. 65 mm Axle spacing: approx. 125 mm Colour: Light grey Frame height: approx. 120 mm Frame width: approx. 35 mm Drive Type: SEW Motor Flat Belt Stock: approx. 90 meters Price per meter The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics W ...

TECHNICAL DATA: 04 roller conveyors mm: 1900 x 6000 01 roller conveyor mm: 3000 x 1200

Approx. 14 tons different Pumps

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

We offer, used: Polyketting Conveyor belts - transport tracks with frequency-controlled / frequency converters on the motors for Tetra Pak beverage cartons 19 frequency-controlled motors More than 100 meters of transport track Subject to prior sale

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manafacture: Budde Condition: Used Drive type: motorized vertical shaft Total length outside: approx. 1500 mm Total length inside: approx. 1850 mm Total width incl. motor: approx. 900 mm Total width without motor: approx. 560 mm Conveying width: approx. 540 mm Material: steel, plastic Colour: light grey Includes feet (height adjustable) and motor gearbox (North 0.55 KW) Ejector/ Smuggler/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to pro ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...

Offer 6 ignition coils NEW for sale

Dear's The engine, the details of which are included, is also for sale in the form of a high-pressure pump. It has been used very low Please do not hesitate to call. Regards Hakan Kuşcu +905323642509

Goodday, Please kindly note that, We have in stocks Ansaldo engine and gens Ansaldo 326S 800CV...2 pcs Ansoaldo 194 Gens 130HP 2 pcs If anybody interesting Please don't hesitate to contact with us. Regards Hakan +905323642509

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d-30-used/724, , = More information =, , Type: Engine, Year of construction: 1010, Empty weight: 295 kg, Type number: 34D/30

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d30-used/711, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 34D/30; Transport weight [kg]: 300

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d30-used/710, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 34D/30; Transport weight [kg]: 345

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Working Hours: 350 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d30-used/826, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 34D/30; Transport weight [kg]: 300

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Working Hours: 350 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d30-used/824, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 34D/30; Transport weight [kg]: 295

Engine Brand: VM MOTORI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Working Hours: 350 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 68 Kw, Rated Speed: 2600 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/vm-motori-34d30-used/825, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 34D/30; Transport weight [kg]: 300

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Istel, Type: Hebevorrichtung Motorisch, Lifting power kg: ca.200, Length mm: 1600, Width mm: 790, Lifting hight approx. mm: 1100, Total hight mm: 250, Hand switch: yes, Safety strip: no, Total power kW: 1,1, CE-Sign: no,

Manufacturer: Homag , Type: 4 Motoriges Kopieren, Year: ca.1993, FREETEXT1: komplett mit Ständer Flanschplatten<CRLF>, FREETEXT2: inkl Tasteinrichtung, FREETEXT3: 4 Motore /165 Volt/300 HZ 18000 Umin, Year :ca.1993

Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

Description OSAI A.B. - SERVO MOTOR BRUSHLESS Model: SS S3016 240 V; 0,75 kW; 5000 rpm.

Description SELEMA - SERVOMOTOR BRUSHLESS Manufacturer Code: T-1-02-060-24-02-C1 180 V; 5,2 A; 0,75 kW

Gear Motor - Motor: Motovario, Gearbox: Neri Motori 2.2 kW

TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor Double-Shell UW Excavator Grab Type: 5.5 Content: 5.5 m³ Year of Make: 2000 Net weight: 7,500 kg

Dynapac BT90 motor block / vibration drive, Technical specifications:, - Manufacturer: Dynapac, - Type: BT90, - Power: 5.5kW, - Speed: 2100 min⁻¹, - Year of construction: 2011

Dutchi DM1 160 M4 electric motor with 11 kW and 1440 rpm at 50 Hz and 13.2 kW and 1730 rpm at 60 Hz, sizes: 600x320x430 mm (LxWxH), weight: 113 kg;

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

Marelli Motori AC Generator M7B 315 LD 4 AC synchronous generator from 1995 with 1,360 operating hours. 1 available 400 V/50 Hz – 575 KVA Manufacturer: MarelliMotori Model: M7B 315 LD 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 830 Speed [1/min]: 1,500 Year of Make: 1995 Hours: 1360 Dimensions LxWxH [cm]: 1.40 x 0.90 x 1.20 Weight [kg]: 1.346

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg