david brown used for sale

DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...

One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible.

sheet width: 4200 mm plate thickness: 14 mm pre-bending: 10 mm roll diam. toproll: 340 mm roll diam. bottom roll: 310 mm speed: - m/min Control: Davi CNC total power requirement: - kW weight of the machine ca.: 11 t dimensions of the machine ca.: 6,5 x 1,75 x 1,65 m - DAVI CNC control - pre-Bending - Hydraulic 4-roller drive - Side roll diameter: 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Little David case taper Model: LDU/2 Serial: 5015 Top case taper, bottom grip belts with side guides, max box 550mm W x 600mm H, mobile, 3Ph

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

We are offering for sale a complete XPS foam sheet extrusion and coating line, consisting of the following equipment: 1. Davis-Standard Extruder System Model 1: 100MM35 - HP Capacity: 257 HP - KW Capacity: 192 kW - Gear Ratio: 17.39 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 408,300 lb / 185,204 kg - Oil Fill: 23 liters (6 US gal), ISO VG 150 Model 2: 130MM45T - HP Capacity: 400 HP - KW Capacity: 298 kW - Gear Ratio: 17.49 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 690,000 lb / 313,000 kg - Oil Fill: 45 liters (12 US gal), ISO VG 150 S-Wrap Unit - Model: S-WRAP - Mfr Date: 08-2007 2. LEWA High-Pressure Metering Pump (x1) - Designed for Isobutane - Adjustable stroke head for low % addition - Triple heads LDD3 LEWA diaphragm metering pump - Digital flow meter for injection rate (kg/hr) - Pressure indicators at pump inlet & outlet 3. Dosing  ...

- CE Safety cord around machine - NEW Davi Smart opperator panel - Separate controller cabinet - Central lubrication

number of aggregates: 6 St. cutting width: ~ 5.000 mm Cutting height: ~ 100 mm Daveba multiple cross-cut saw for simultaneously cutting long boards to several shorter ones (with variable length) without mechanization. The system is dismantled and ready for loading. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 205 mm side roll diameter: ~ 195 mm Control: konv. oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 3200 kg range L-W-H: 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch u ...

Offer 26035 Technical data - Three driven rollers, each roller hydraulically adjustable - For bending and conical rolling, side bracket can be swivelled out - Operation of swivelling control panel with digital actual value displays - Max. working width 3050 mm - Max. sheet thickness at 400 N/mm² without bending 20 mm - Bending at bending diameter min 5 x top rolling. 16 mm - Upper roller diameter 340 mm - Side roller diameter 250 mm - Lower roller diameter 300 mm - Drive 400 V / 9.5 kW - Working speed adjustable - Space requirement approx. W 6200 x H 1650 x D 1650 mm - Weight machine approx. 16000 kg - Total weight machine + support mast + support arm 19500 kg with: - Extended roller ends for attaching profile rollers - Conical bending device - Side support arm hydraulically movable - Upper support mast hydraulically movable

This Harley Davidson FLSTCI Heritage Softtail comes with original documentation such as registration documents. This vehicle is completely original and damage-free. This Harley Davidson FLSTCI Heritage Softtail is both technically and cosmetically in good and well-maintained condition with normal signs of wear and has been well and expertly maintained. This Harley Davidson FLSTCI Heritage Softtail, built in 2003, was delivered new in the Netherlands at the time. Accessories: Leather bags, modified exhaust system, windshield, clock, chrome crash bar, chrome footrest. Valuation report worth 22,500.00 available Viewing by appointment Auction-ID: A1-40237-6

This Harley Davidson Legend Drag Softtail Custom Built comes with original documentation such as registration documents. This vehicle was completely restored and Custom built at the time. The vehicle is equipped with various expensive accessories. This work was carried out well and expertly. This Harley Davidson Legend Drag Softtail Custom Built is both technically and cosmetically in very good and well-maintained condition and has been well and expertly maintained since its construction. Valuation report available worth 27,500.00 euros Viewing by appointment Auction-ID: A1-40237-5

Harley-Davidson V-Rod Muscle (VRSCF) – Vehicle Specs • Registration date: 07/2011 • Displacement: 1,247 cc • Power: 90 kW (122 hp) • TÜV/AU valid until 06/2026 (DEKRA without defects) • Colour: Special paint orange • Transmission: 5-speed manual Facilities and extras • KessTech exhaust system with EC approval (legal, sound adjustable, value approx. €2,500) • Wide tire rear wheel 240/40 R18 • Very neat condition, garage vehicle • All documents and certificates available (registration, DEKRA, type approval) Particularities • Porsche-co-developed Revolution engine • Eye-catching appearance thanks to special orange paint finish • Rare combination of paint, KessTech system and wide tires • Ready to drive immediately, no investment backlog Contact: Line Gerost – Surplex E-mail: l.getrost@tbauctions.com Phone: +49 171 838 ...

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Auction-ID: A3-43510-39022

machine ready for transport and to be assessed on viewing day PLC program problem Auction-ID: A1-44905-143

Concerns model 1506 / 2700 that were made; Equipped with a new set of tires! Auction-ID: A1-42011-5

- Engine runs (see video) - No papers available (old number plate present as well as chassis numbers) Auction-ID: A3-43507-16439

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45506-1033

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45506-1034

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45506-1032

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45506-1035

Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right

Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Model: KR16-06 Operating Pressure: 150 mbar Design Pressure: 500 mbar Scope of supply: this is fitted to all landfill gas engines as a prefilter before the gas goes into the engine. It removes water and particulate. Kelburn KR16-06 Coalescer Filter Vessel comprising of one off 400mm diameter demister/filter vessel, polyester / borosilicate microglass coalescing filter cartridge, RF flanged inlet, RF flanged outlet, ¾” BSPT (F) tapped drain connection, ¾” BSPT (F) tapped and plugged vent connection. Coalescer Filter Vessel complete with automatic liquid float drainer, differential pressure gauge complete with stainless steel isolating valves, fittings and pipework, sight level gauges, flanged access cover and davit arm and flanged and blanked inspection cover, 1 Complete set of interconnecting pipe work from filter vessels and automatic liquid float drainer, 1 Skid base ...

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Key data: 160 liter

Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 40,680 mm Laebtwcew Davmjpdnjd Number of fields / row of shelves: 01 pcs. á 3,600 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Pallet spaces per row of racks: 132 pcs. Total pallet spaces: 132 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): n/a The scope of delivery includes: 12x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 3,000 mm high 1,050 mm d ...

Key features: • Brand and model: GES-25 MKII T, Capacity: Up to 34 people, Length: 7.50 m, Width: 2.75 m, Height: 3.42 m, Draft: 1.29 m, Weight (fully equipped): 4,443 kg, Maximum davit load: 7,000.5 kg (with 34 persons, 82.5 kg/person), Material: Flame-retardant glass-reinforced polyester (GRP), Maximum installation height: 22.0 m, Length and angle of launch platform: 9 m, 35°, Operating temperature range: -15°C to +40°C • Hydraulic steering: For smooth maneuvering, Safety harnesses: 4-point adjustable safety harnesses for all seats, Sprinkler system (tank version): o Seawater-resistant aluminum pipes, Stainless steel deflectors, 3 x 50L air cylinders and high-pressure hoses, Additional features and finish: • Colors:o External: Orange (RAL 2004), Internal: Gray (RAL 7032), Buoyancy material: Polyurethane foam, Hatches: 1 rear door, 1 top hatch, 1 forward hatch, Windows: Polycar ...

Chassis number: TRI AX 0502347, Equipped with Staja DAVID-3 6.44/23 injector, load cells, digital sampling, completely overhauled in 2021, tandem axle, K80 towbar, work lighting, central grease lubrication. Auction-ID: A1-40133-11

Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customers needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table De ...