dairy used for sale

Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc. Article number: 10886801., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

Unused small gear wheel for a Westfalia MSB 130-01-076 skimming separator. Article number: 3170 3423 010. German name: Schnecke. For a 50 Hz driven machine., Type of Machine: Small Gear Wheel, Drive line: 50 Hz, Condition: Never used

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Motor of a Cream separator (Skimmer), GEA Westfalia SAMM 20006. Motor power: 30 kW - 380 V - 59 A - 1.470 rpm - 50 Hz - 3 Ph. Rotor: DS5. I.CI. F. IP 55. Weight: 255 kg., Type of Machine: Motor Cream Separator / Skimmer, Motor power: 30 kW - 380 V - 59 A - 1.470 rpm - 50 Hz - 3 Ph

This APV Gaulin MC18-2,5TPS homogeniser is a 3-cylinder machine which is designed for 7.000 liter per hour with a maximum pressure of 150 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometers. Motor: 37 kW - 400 V - 70 Amp - 50 Hz - 1.475 rpm. Oil pumping system inside the machine. Stainless steel cladded., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 7.000 liter per hour, Stages: 2 stages with Micro-Gap valve, Max. Pressure: 150 bar, Valve cylinder: Poppet valves, Product: Milk, Piston diameter: 65 m ...

Cream separator (Skimmer) for separation of milk or whey. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, cyclone sludge tank, base plate, feet, watervalves (original Westfalia), main control cabinet with frequency converter (ABB) and control panel with Allen-Bradley SLC 5/03 CPU Processor and Allen Bradley PanelView 1000. Controls upgraded in 2008 by GEA Westfalia. Endress + Hausser Promass 83 Flowmeter., Type of Machine: Cream Separator, Capacity: 35.000 liter per hour, Bowl speed: 4.800 rpm, Motor: 45 kW - 460 V - 74 A - 1.775 rpm - 60 Hz - 3 Ph, Weight: 3.300 kg, Dimensions: 210 x 125 x 235 cm

This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...

The GEA Westfalia CA 365-010 is a two-phase horizontal stainless steel decanter centrifuge (liquid + solids separation). It’s a continuous, high-G, conveyor (scroll) decanter used in food, oil, wastewater and chemical applications. Previously it is used as a fine decanter in a casein plant (foood industry). Diameter bowl: 365 mm. Diameter scroll 354/205 mm. Bowl speed: 4.000 rpm. Solids: 2.0 kg/dm3. Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A. Including hydraulic unit (Viscotherm AG, Pump-unit, C18.5-28.2Z/LP-W-50/10, year 2015, motor 18,5 kW, max pressure 170 Bar)., Type of Machine: Decanter, Diameter: 354 / 205 mm, Bowl speed: 4.000 rpm, Solids: 2.0 kg/dm3, Motor: 30 kW - 420 V - 50 Hz - 2.930 rpm - 50,5 A, Weight: 2.400 kg, Dimensions: 240 x 150 x 185 cm

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), motor cover, base plate with 2x feet (2 missing), water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator, counter pressure valve and service tools for maintenance including pressing tool., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 380 V - 38 A - 1.465 rpm - 50 Hz - 3 Ph, Weight: ± 1.700 kg, Dimensions: 200 x 110 x 180 cm

Main shaft for an Alfa Laval MRPX 214 TGV or MRPX 413 SGV Separator., Type of Machine: Main Shaft, Drive line: 50 Hz

Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg

Cream separator (Skimmer). Manual cleaning. Machine comes with the bowl, motor (11 kW), motor cover, feet, inlet and outlet pipes with flow indicator, service tools for maintenance and some spare parts., Additional features:, Excluding:, - Base plate., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 11 kW - 380 V - 50 Hz - 1.460 rpm - 22,5 Amp - 3 Ph, Weight: 1.060 kg, Dimensions: 155 x 80 x 110 cm

Used piston homogenizer from GEA type Ariete NS 3075. Maximum working pressure 20 MPa. Capacity 10,000 litres/h. Control.

The Siebtechniek CONTURBEX is a continuously operating filtration centrifuge and it achieves his flexibility by means of a centrifuge scroll driven at a differential speed. The unique functional principle of pre-accelerated suspension feed to the screening device, combined with homogeneous distribution by means of the worm, enables this centrifuge to perform complex tasks. We achieve optimum dewatering results by adapting the machine parameters, G force and dwell time. The solid material is conveyed by means of a worm rotating at a different speed from the bowl. Solid and liquid are conducted away into separate housing sections. Mother liquor and washing liquid can be drained away separately from each other. The drive for the SIEBTECHNIK screen worm centrifuge stands out for its powerful gear units and a high-quality bearing support. A central oil-circuit lubrication system supplies all  ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil memb ...

Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, th ...

Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per ho ...