d link used for sale

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Clamping plate with threaded hole, plate field, welding table, welding table, pallet changer, face plate -Diameter: 1650mm -Thickness: 100 mm -Recess: 730 mm -Thickness: 90 mm -Plate: is solid -Quantity: 1 piece available -Price per piece -Dimensions: 1650/1650/H190 mm -Weight: 1530 kg

Power converter, power supply, power supply unit, converter, servo power unit, frequency converter Manufacturer: SSB -Type: DDUS 06 E38 C5 -Quantity: 1 available Price: per piece -Dimensions: 250/205/H195 mm -Weight: 5 kg/piece

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Used camshaft for 8-12-16 cylinders

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm -Passage: Ø 76 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

The scope of delivery includes: 01x Particleboard/ flooring for mezzanine floors, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Particleboard thickness: approx. 38 mm Design: P4, grooved all around Weight / piece: approx. 65.50 kg Panel size: approx. 2.65 m² Colour top: raw Colour underside: white Note: - The chipboard is as good as new. Due to the storage, dust deposits may be present. - The chipboard does not have a spring. These are picked separately. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Through hole: Ø 78 mm -Weight: 30 kg

Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 60 pos. tool taper: HSK A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,0 x 6,5 x 3,2 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool mo ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° max. workpiecediameter: 850 mm max. workpiece height: 550 mm tool magazin:: number of toolpositions: 32 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool weight: 8,0 kg change-time chip to chip: 10 sec feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min Accelaration: 5 m/s² total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 5,0 x 2,9 m Documents: Chip conveyor: Coolantsystem: test probe: Heidenh ...

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm -Passage: Ø 40 mm -Weight: 7 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Rezess: Ø 130 mm -Hole circle: 3 x 144 mm -Throughout: Ø 41 mm -Weight: 6 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -Thread mounting type: M76 x 6 mm -Weight: 43 kg

Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.

With Jagfeed and Jackpack 40-2 Delivery

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 380 mm -Admission thread: M76 x 6 mm -Weight: 38 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm

Dong Sung folder gluer Typ: 1FG-400 Farmacutical Age: 2002 Straightline 1 point gluing Barcode reader Free of damages. Available immediately

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg

Product Identifier: FVB-1, 2400 dpi, Fiery EXP50 RIP, Speed: 50 Pages/Minute, Resolution: 600x600 dpi, Paper Capacity: Dual 2000 Sheet Paper Drawer

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg

Four-jaw chuck, 4-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 57 mm -Thread: Ø152 / Pitch 4mm -Weight: 19 kg

Several containers / silos are sold against bidding.

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg

Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available

SEW Eurodrive KHF67/R DV132S4/BMG/TH/VR/AV1H Geared Motor 230/400 V 1430/135 r/min 390 Nm Weight: 90.5 kg More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg

On offer is a used D 36 S Delta Hybrid engine in good condition. If you have any questions, please do not hesitate to contact us.

Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem

Key data: 1000 mm, 600 mm, 600 mm

Machine Details Stock-No. 1105-03985 Type of machine Machining Center - Vertical Make LID-MAHO (DMG) Type DMC 103V Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 1000 mm y-travel 600 mm Z-Travel 600 mm CNC-control Siemens 840D ShopMill table-size 1200 x 600 mm max. table load 800 kg throat 640 mm spindle taper ISO 40 feed stepless 1-30,000 mm/min Spindle Turning Speed Range 0-8,000 1/min Drive Capacity - Spindle Motor 13 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Additional information - control Siemens 840 D - operating hours 29710 h - coolant equipment TROUGT THE SPINEL 20 BARS CHIPCONVOYER

- Modular metal shelves with shelves -Scales - Combined refrigerated display cases - Multi-level refrigerated wall cabinets type Arneg - Refrigerated cabinets and display cabinets - Slicing and packaging machines - 2 cold rooms - Shopping trolleys

Power supply unit, built-in power supply unit -Type: (DIN 41752) G24 G5/25WRGD -System: SVS2 -Current input: DC 24V -Current output: DC +5V/25A DC +-15V/0.3A -Dimensions: 270/80/H220 mm -Weight: 2.5 kg

grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg