d link used for sale

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Weight: 12.6 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Immediately available used camshaft

Immediately available used camshaft

Used Double Z-blade mixer, Capacity: 100 kg. New 2009.

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

Connecting Rod With New Bushing And Used Immediately Available

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Dough sheeter Rondo Doge SFA 612 -automatic sheeting machine with reel -Manufacturer: Rondo -Model: Doge SFA 612 -mobile on castors -with touch display -Band length 160cm -Band width: 64cm

Immediately available completely overhauled in-store air coolers, we also have used ones in stock

Immediately available new cylinder liner with APR ring

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 190 mm -Passage: Ø 56 mm -Weight: 10.6 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 56 mm -Weight: 9 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Hole circle: 156 mm -Passage: Ø 54 mm -Weight: 12.7 kg

-Spiral mixer Diosna SP 120 D -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Admission recess: Ø 160 mm -Passage: Ø 56 mm -Weight: 10 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 270 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 21 kg

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 215 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 9 kg

See appendix for the current complete inventory list. Sellers of different models, types and sizes. For deep freezing, plus cooling and air conditioning. With or without defrosting, different slat widths. Models such as: SG, SP, DE, DZ, DF, DP Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at Website: frigocom.at

Sorfort available in recon or used injection pump

Shaft vice, machine vice -Clamping diameter: 95 mm -Dimensions: 290/200/H225 mm -Weight: 24 kg

WE OFFER AN NICE CONDITION DMU 70 EVO MACHINE IS ON POWER WORKING DAILY ORDERS IN SHORT WE PROVIDE VIDEO OF WORKING

Cutting lenght 6000 mm Cutting thickness 13 mm

Immediately available used injection pump

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Admission recess: Ø 168 mm -Passage: Ø 55 mm -Weight: 12 kg

Immediately available used injection pump

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Weight: 18 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Throughout: Ø 46 mm -Weight: 9 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

Stick electrodes 3.2 x 350 -Type: FOX DCMS Kb -Price: per package -Number: 5 packages available -Weight per package: 4.3 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 950 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 385/280/H230 mm -Weight: 36 kg

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.85 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 600/420/H1140 mm -Weight: 222 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 930 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 B14 -Flange: Ø 160 mm -Protection class: IP 33 -Dimensions: 355/260/H195 mm -Weight: 25 kg

Immediately available used injection pump

-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg

Spiral Kneader Dough Machine Diosna Model: SP 120 A with extendable tank wagons Kneading machine for max. 120 kg dough Cover with timer and 2 gears Lifting and lowering via control Connection 400V, 16A-CEE plug Used machine for export More spiral mixers in stock!