d link used for sale

Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...

FOR SALE... WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY PLS FIND ENGINE SPECIFICATION AT BELOW. RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 MADE IN SWEEDEN CRANKSHAFT STD SIZE MEASURMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Power supply: 230V 50Hz (1-phase) very good condition - nearly new; ready for operation

Duerselen 7-fold drill head; suitable for Duerselen Corta paper drilling machines; was developed for aviation, stapling for flight maps; Abstaende see picture. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

Upright stack delivery with pressing unit; working condition

Unused spare parts for Duritan lighting field Panacol-Elosol 3 UV tubes 2 chokes 1 Starter Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider".

Planmed mammography device Nuance Excel - digital with the following device components: Tube M113 A Varian 0,1/0,3 1x Detector Flex AEC Radiation protection wall + 2. Device with tube and detector as spare parts dispenser • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authoriz ...

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

Dear's Sale, used 2 complete engine Deutz SBA8M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

DEAR'S SALE, COMLETE ENGINE DAIHATSU DSb-18A & PISTON, COVER, LINER ANY PARTS Brgds Hakan KUSCU +905323642509

Te Koop: Endress & Hauser Drukniveauopnemer level sensor. Delta pilot. Type: DB50-L-ACooBC13GG30

Te Koop: Endress & Hauser Druktransmitter. Cerabar type: PMC 531-D40D2A6A25

Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

Te Koop: Duran ms kijkglas. Doorsnee glass 200 mm 205 mm hoogte. Max 4 bar. Inbouwflens Noris. Doorsnee 340mm Dikte 22mm. 8 gating HoH 300m. Doorsnee get 22mm

Te Coop: Endress & Hauser level sensor DELTA PILOT S DB50-L

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation

Depositor Serial: D150P511007 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame,

Rotary vane vacuum pump 2 Stufig state indoor and outdoor absolute condition, Rebuilt and repainted Warranty: 12 months Manufacturer: Pfeiffer Type: DUO 120 Motor: 400V DS resources: petroleum Includes: User manual oil mist eliminator optional Delivery time: on request photo is adjusted retrospectively.; ready for operation

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

Dear's Sale, Stork DRO218 engine's Up block, comp cover, piston, conrod, pump, liner... Ready for transports. Best Regards info@kscege.com

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

For sale: USED Diane XT HMI Control Panels , 1 x PP250 & 1x PP450, USED and in good working condition email for photos and price Ex-Stock UK

The DH exxactly. QS is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. • Version as a tabletop unit or on a mobile base • For dimensional control in the machine room, in incoming goods or quality assurance • Smooth-running guidance for precise and fast measurement • Safe measurement of long workpieces by one person • Measuring range of choice up to 7,000mm (longer version possible on request) • Easy-to-read large digital display "Lowest-Power-LCD" • Power supply depending on the display unit battery or mains connection 100-240 VAC; 50/60 Hz • Dimension display on 1/10 mm

With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW;

DEAR'S SALE, COMPLETE DEUTZ 6M628 Std cranksaft OVERHAULED , good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

New! Heavy duty support SFS D30, DIN EN 1065, 1,70-3,00m galvanized, new á 41,30€ net Loadable like a 30KN support at the introductory price of a 20 KN support of 41.30 € / piece net! Hot-dip galvanized, hot galvanized, 8mm head and foot plate, fully extended 29.3 KN handle on top. Stem bottom 34,80KN fully extended. Tube diameter outer tube 76mm, inner tube 63.5mm. Weight of one support 17,80KG/ piece. On request, the supports can be provided with your company logo from an order volume of 500 pieces! European Community product All prices excl. VAT and transport Sale reserved! If you have any questions, please call 0049 176 70044689, Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenst ...

Daub Model: DV10 bun divider / rounder Serial: 62 Daub semi automatic bun divider rounder For dividing and rounding rolls, 36 divisions at a time, 3 phase, 3 moulding plates

Stock# U2416 Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE WARTSILA DIESEL 16V25 ENGINES AT OUR STOCK. ENGINES ARE IN GOOD WORKING CONDATION. ENGINE CRANK SHAFTS HAS STANDART SIZE HARD MARKING ON IT. ENGINES READY TO INSPECTION AND READY TO TRANSPORT. PLS FIND ENGINES DETAILS ON BELOW TYPE 16V25 ENGINE SERIAL NO. 4062 & 4063 POWER 3230kW RATED SPEED 900 RPM RUNNING HRS 27402 & 24816 YOB 1997 IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Hazardous material Cabinet, Safety Cabinet Manufacturer: Düperthal Type: 2.22.925-3 DIN 12925, part 1 Dimensions: width x depth x height (approx. 120 x 60 x 193 cm) 2 door with 3 adjustable shelves without a key automatic closing small Fender Bender All information without guarantee

Double door depyrogenation owen De Lama model DLST/L year of manufacturing 1998. Useful capacity 5440 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 157 kW. Maximum working temperature 250 C °.

Diosna SP 240 A DL with 3 bowls -Machine after overhaul -New bearings, new wedge belts, new switches, new buttons, -2 Speed -2am for 30 minutes -3 bowls -For 240 kg dough

ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.

Doka four-way head H20 - galvanized Ceiling support head for the support and stabilization of doka formwork carriers. Weight 4kg Length 25cm Width 20 Height 33 Doka 4-way head H20 - galvanized Floor-prop head for supporting and stabilising Doka formwork beams. Weight: 4kg Lenght: 25cm Width: 20 cm Height: 33 cm

TREFOLATRICI MONOARCO 3000 GIRI "O.M. LESMO", MODEL DTO 630, MATR. 737878/1, 737878/2, BOB COLLECTION : 630 COMPLETE OF PEPMESS "ANDANTEX" TYPE SATORFORSFOR1/8 BOBINE CONIFLIP REREFERES AND LINK WITH BANCAL OF ACUNCUNMENT FOR 48 BOBINEs

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

DAF 825, overhauled

DAF 825, used

Dear's Sale, used 2 complete engine Deutz BA6M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl cranksaft etc any parts. Brgds Hakan KUSCU +905323642509