126,715 used machines on RESALE, but how to find them? Machine Search
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmZ travel730 mmX travel300 mmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm
used
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel705 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode
used
Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm
used
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode
used
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Drive power (100% DC)15 kWType of main driveAC Drive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm
used
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWSpeed range-3500 rpmDrive power (40% DC)19,5 kWTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemperatur.Signal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: interventi ...
used
General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode
On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...
Key data: 1600 KW, 2000 kVA, 400 V
Brand: Caterpillar Inc. Model: 3516 Year: 1990 Type: Industrial diesel engine Configuration: V16 (16 cylinders) Cycle: 4-stroke Displacement: approx. 69 liters Turbocharged: Yes (twin turbo) Cooling system: Water-cooled Power output: approx. 1,600 – 2,000+ HP Operating speed: approx. 1,200 – 1,800 RPM
Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right
Paper drill Dürselen Corta PB 04 N; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke adjustable; max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drill belt; Optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; endless drill band.
Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke182,5 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmGeneralUniversal Turning Machines; Control: Siemens 840D SL Main drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...
General SKU204Y005 MakeFlottweg Serial009.006.01 Magento base g_extra_specificationsDia 620mm, drum material 1.4463, drum drive 75kW , screw drive 22kW, 500 volt motors, with spare screw angle inclination 8 degrees. Information LocationBarneveld CEcheck Main Features MaterialStainless steel Motor75 KW Specified Features - Decanter Decantercheck Screw diameter600 mm Screw length2500 mm InletDN65 Liquid outletcheck 250x800 mm Solids outletcheck 700x800 mm Motor75 kW, 500 V 1483 rpm With hydraulic unitcheck Motor22 kW, 500 V 1465 rpm Max. rotor speed3000 rpm MaterialStainless steel 1.4463 Information TypeZ6E-4/454 No.009.006.01 Year of construction1996 With switchgearcheck Control panel (as is): No Electrical panel included Floorspace4,90x1,80 m Total height1,30 m Weight9750 kg Extra SpecificationsDrum speed 3000 rpm, screw differential speed 1-31 rpm, : We ...
General SKU223T197 MakeFlottweg-Dekanters (DE) TypeZ 32-3/401 No.902336 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Motor20 KW Specified Features - Decanter Decantercheck Screw diameter320 mm Screw length934 Inletø 45 mm Liquid outletcheck Solids outletcheck Motor20 kW (400 V, 2940 rpm) Max. rotor speed5000 rpm MaterialStainless steel 1.4408 Information Floorspace2,1 x 1,3 m Total height0,8 m Weight1400 kgDecantersNew arrivalsFlottwegCentrifuges > DecantersNew arrivalsBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU223T196 MakeFlottweg Dekanter (DE) TypeZ3L No.F 831 Year of construction1981 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter Decantercheck Screw diametermax. 420 / min. 226 mm Screw length900 mm Inletdia. 46 mm Liquid outletcheck Solids outletcheck Motor22 kW (400 V, 2940 rpm) Max. rotor speed4000 rpm MaterialStainless steel 1.4307 (304L) Information With switchcheck With switchgearcheck (as is) Floorspace2,3x1,3 m Total height1,9 m Weight2350 kgDecantersNew arrivalsFlottwegCentrifuges > DecantersNew arrivalsBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU241P262 LocationBarneveld MakeLEWA TypeLCA Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume3.33 Ltr. Motor0.18 KW Specified Features - Dosing pump Pumpecosmart diaphragm metering pump Capacity3,33 Ltr/h With motor0.18 KW, 230/400 Volt (EX II2G c IIC T1-T4) With variable speed drivecheck Inletdia.8mm Outletdia.8mm Information Mach.No.533537-010.002 Year of construction2011 Floorspace0,4 x 0,3 M Total height0,5 M Weight30 KG Extra SpecificationsPistondia.6mmDosing pumpsFood additivesLewaPumps > Dosing pumpsIndustries > Food & Feed > Food additivesBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...
Machine : Grinding Wheel Flange Make : Grinding wheels and grinding wheels Type: Inner cone holder Pos. Text pcs. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4 50 62 60 127 30-50 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 Ca.85 -30 146 H 1 45 60 75 Ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 hp V03 , 406x200x203mm ( 270x25x25) Price: € 200,-
We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export
This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip swi ...
Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.
used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm
Key data: 30 t
DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...
General SKUR1308 MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Year of construction2006 Mounted on framecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, RECONDITIONED Spray dryersReconditionedAnhydroDryers > Spray dryersReconditionedBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...
General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...
General SKU103Y799 MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Year of construction19856 Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner Information LocationBarneveld Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.Double screw extrudersBaker PerkinsExtruders > Double screw extrudersBrand > Baker Perkins What you can expect from Foeth: -- Machine is ...
A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.
Deboning belt, s/s frame, plastic belt, belt width: 500 mm, total dimensions: 5400 mm x 1400 mm x 2550 mm. Missing cutting plates.
A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...
Dosing and mixing plant Dekumed Unidos 300-3K. More information on request. Immediately available.
Key data: 333 KW, 1500 1/min
Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.
General SKU400W1578 MakeFlottweg LocationSold CEcheck TypeZ4E-4/451 Main Features MaterialStainless steel Motor37 KW Specified Features - Decanter 2-Phase decantercheck Screw diameter420 mm Screw length± 1650 mm InletDia. 50 mm Liquid outletDia. 150 mm Solids outlet500x300 mm Motor37 kW, 400 volt, 2955 rpm Max. rotor speed4200 rpm MaterialStainless steel Information No.012.386.09 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace3,50x1,00 m Total height3,94 m Weight9000 kg Extra SpecificationsInside 20” container, total dimensions 6,06x2,50x2,70 m, : max sediment density 1,4 kg/dm3, product temperature 0/100°C, Siemens touchscreen control DecantersFlottwegCentrifuges > DecantersBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...
General SKU106Z375 MakeLB Bohle Ennigerloh TypeTrockenschrank TS-30 D No.601 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Specified Features - Drying oven Drying oven(1x) Number of compartments:1 Capacity1800 Ltr Internal width875mm Internal depth1450mm Internal height1450mm Steam heatingcheck (4 bar) Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheels(1x) 2x 15 slots (800x530mm) MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace1,6x1,3 m Total height2,6 m Weight1100 kgDiscountDrying ovensLB BohleDiscountDryers > Drying ovensBrand > LB Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...
General SKU050F238 TypeGHT-400 Glatt Horden Trockner LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm MaterialStainless steel 1.4301 (304) Information No.101010 Year of construction1991 With switchgearcheck Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX compatiblecheckDiscountDrying ovensGlattDiscountDryers > Drying ovensBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a ...
General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying ovenZinc crucible furnace (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heatingBurner make Riello, type 40 GS 5 (120 KW) Information LocationBarneveld With switchgearcheck Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGDiscountDrying ovensEvans LeedsDiscountDryers > Drying ovensBrand > Evans Leeds What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU079B442 MakeLytzen Denmark TypeC No.891139 Year of construction1989 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Max.temp.300 °C Specified Features - Drying oven Drying oven(1x) Max. temperature300 Degr. C. Number of compartments:1 Capacity1000 Ltr Internal width820mm Internal depth840mm Internal height1500mm Electric heatingcheck Electric capacity18 KW, 380 Volt Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheelsMobile rack (11 slots 700x790mm) MaterialStainless steel Information With switchgearcheck Floorspace1,4x1,4 M Total height2,5 M Weight700 KG Extra Specificationsweek program is not programmable. DiscountDrying ovensLytzen DenmarkDiscountDryers > Drying ovensBrand > Lytzen Denmark What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...
General SKU004F006 MakeVötsch Industrietechnik GmbH TypeNTU 60/40/60-S-GMP 400 C No.59526004580010 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Volume144 Ltr. Max.temp.400 °C Specified Features - Drying oven Drying ovenwith outlet-air heat exchange system (1x) Max. temperature400 Degr. C. Number of compartments:1 Capacity144 Ltr Internal width600mm Internal depth600mm Internal height400mm Electric heatingcheck Electric capacity21,6 KW, 400 Volt Number of doors:1 With fan(44 m3/Min) Motor1,5 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information With switchcheck Floorspace2,1x1,0 M Total height2,2 MDiscountDrying ovensVötschDiscountDryers > Drying ovensBrand > Vötsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle
Decoiler of construction steel coils up to 5tons. Machines worked just less than one year.
bore capacity in steel (diameter):45 mm WORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mm WORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total weigh ...
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm
faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D
Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20
pressure:100 t distance between columns:1230 mm stroke:20 - 200 mm no. of strokes:20 - 60 /min distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1050 x 750 mm table height over floor:760 mm side window:540 mm ram surface:1000 x 750 mm ram adjustment:100 mm power requirement:18,0 kW weight:20,5 t Dimensions (WxDxH):2,8 x 1,9 x 4,3 m infinitely variable drive:PIV clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
pressure:160 t distance between columns:880 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:830 x 1000 mm hole in the table:265 x 365 mm table height over floor:850 mm side window:610 mm ram surface:860 x 1000 mm power requirement:55,0 kW weight:14,7 t Dimensions (WxDxH):2,2 x 2,0 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary
maximum number of results exceeded
please refine your search
650 € 
