130,760 used machines on RESALE, but how to find them? Machine Search
surface area: 440 x 1000 mm no. of flutes: 5 groove width: 16 mm total power requirement: - kW weight of the machine ca.: 210 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 24 kg
inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/min drive motor: 0,55 kW total power requirement: 0,55 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric cable winch -other crane ropes are also available -Weight: 36 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available -Weight: 17 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 12 mm -Length: approx. 36 m -for electric cable winch -other crane ropes are also available -Weight: 18 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 16 mm -Length: approx. 22.8 m -for electric cable winch -other crane ropes are also available -Weight: 19 kg
Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg
koop Krohne Flowmeter Type: Optiflux 2050 DN 150 Serial Number: A 1907142 Order number: 3.0014 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: approx. 7 m -Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 3 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 10 m -for electric cable winch -other crane ropes are also available -Weight: 3 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: 52.5 m -for electric cable winch -other crane ropes are also available -Weight: 55 kg
Guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Type: DFM-50-80-PA-GF -Weight: 5 kg
Key data: 250 mm
Various well-preserved face plates Various dimensions
Winch rope, crane rope, hoist rope, wire rope -Wire rope Ø 14 mm -Length: approx. 45 m -Material: Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 37 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: approx. 19 m -for electric cable winch -other crane ropes are also available -Weight: 4 kg
Hydraulic pressure switch -Type: DNA 40 -Adjustable from: 0 to 45 bar -Weight: 0.4 kg
turning speeds: 3.000 U/min grinding wheel diameter: 150 mm table-size: 380 x 220 mm T-slots: 1x 0: 3~220 / 380 V total power requirement: 0,37 kW weight of the machine ca.: ca. 150 kg dimensions of the machine ca.: 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer 3 pieces of very good table tennis tables for canteens or clubhouses Price per piece EURO 250,--
Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din -1 package, contents 10 pieces -Weight: 0.8 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 25 mm -Piston diameter: mm -Piston rod: 20 mm (connection M 16 x1.5 thread) -Total length: 235 mm -Total length extended: 235 mm -Air inlet and outlet: adjustable Quantity: 10 pieces available Price: per piece
Key data: 635 mm, 510 mm, 460 mm
CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions
Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
KIESS DVP 140-2 Cartridge filter system Extraction air volume: 10,000 m3/h KIESS DVP 140-2 Cartridge filter system suction air volume: 10,000 m3/h
Inv. Num. : 7919 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1986 Parameters: Rolling force: 12 5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
Chuck adapter, three-jaw chuck, three-jaw lathe chuck -Outer diameter: Ø 300 mm -Camlock cone mount: Ø 139 mm, size 8 -Bolt circle: Ø 172x6 mm -Receiving thread: Ø 80x5 mm -Weight: 46 kg
pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece
Roller chain, drive chain -Type: AZ22521 -Weight: 2.1 kg
Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Air ratchet wrench, impact wrench, air ratchet -Square: 10 mm -Length: 400 mm -Weight: 4 kg
Gearbox, spur gear -Translation: 1:14 -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg
Spiral mixer Diosna SP 40 D A Diosna SP 40 D spiral mixer with new timers, new ball bearings and repainted is currently for sale. These and many other bakery machines are immediately available for sale in our warehouse. Diosna SP 40 D Spiral mixer - Spiral dough kneading machine Diosna Model SP40D - With stainless steel boiler and spiral - for max. 40 kgdough - with 2 speeds - with 2 timers (new) - Tub capacity: 68 liters - Machine mobile with brake - 16 A CEE plug 400 volts - Ball bearings and timers are new - Machine is completely repainted
Dough machine Diosna Model: SP 180 D Kneading machine mobile with 2 brakes 2 timers, 2 gears Spiral mixer with return button Flour dust hood in silo design Stainless Steel Boiler for max. 180 kg of dough, Connection: 400V, 32A-CEE plug Approx. dimensions: 840 x 1250 x 1400 mm, WxDxH Used machine cleaned more dough machines in stock!
Spiral dough mixer Manufacturer: Diosna Model: SP40 With stainless steel bowl and spiral Dimensions: 570x900x1180mm Volume: 70 liters Capacity: up to 40 kg of dough 2 speeds Timer
Lifting kneader Diosna Kneader extendable Model: S 120 A for max. 120 kg dough Stainless steel kettle and kneading arm Dough machine with flour dust hood 2 tank cars, 180 litre boiler 2 gears, with protection circuit Timer, EMERGENCY STOP DGUV V3 tested Approx. dimensions: 900 x 1000 x 1400 mm, WxDxH Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty Option: Maintenance contract E-Box Service Package More TOP Lifting Mixers in stock!
Pipe sealing cushion, leak sealing cushion, sealing plate, pipe seal, shut-off ring -Pipe sealing cushion: DN1600 -Diameter: 1560 mm -without: rubber seal -Dimensions: 1560/H290 mm -Weight: 255 kg
Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1200 mm -Dimensions: 1200 x 450 mm -Weight: 200 kg
Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T
power resistor, wire potentiometer, resistor -Price: per piece -Number: 4x available -Weight: 0.5 kg
Balancing valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Dungs, safety relief valve -Type: FRSBV 1010 -Connection: DN 25 -Dimensions: Ø143 x 190 mm -Weight: 1.2 kg
Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt: with automatic lifting and rotating device -Belt width: 2x 50 mm, length 2385 mm -Distance: 410 mm -Geared motor: Lenze 0.55 kW -Speed: 51-293 rpm -Belt speed: 11-65 m / min -Dimensions: 1265/815 / H740 mm -Weight: approx. 248 kg
Key data: 65 mm, 300 mm
Machine Details Stock-No. 1105-04031 Type of machine CNC Lathe Make GILDEMEISTER Type MF Sprint 65 V Year of manufacture 1998 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 65 mm turning length 300 mm control SIEMENS 840C Additional information CNC-automatic lathe with with 6 - axis, 4 stations for live tools,in 1 revolver WITH bar loader, bar length up to 3000mm Chip Conveyor
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-40-105-PPV-A -Stroke travel: 105 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 x 1.25 Quantity: 3 pieces Price: per piece -Dimensions: 270/55/H75 mm -Weight: 1.2 kg/pc.
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DNU-32-420-PPV-A -Stroke travel: 420 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10x1.25 -Dimensions: 590/90/H70 mm -Weight: 1.6 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-32-105-PPV-A -Stroke: 105 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10 x 1.25 -Quantity: 5 pieces -Price per piece -Dimensions: 260/45/H70 mm -Weight: 0,8 kg / pc.
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-32-25-PPV-A -Stroke: 25 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M10 x 1.25 -Quantity: 2 pieces -Price per piece -Dimensions: 172/45/H67 mm -Weight: 0,6 kg / pc.
Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Wire rope: Ø 5 mm -Length: 10 m -for: Electric cable winch -other crane ropes also available -Price: per piece -Quantity: 6 pieces -Weight: 1 kg/piece
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg
maximum number of results exceeded
please refine your search
