d link used for sale

Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H285 mm -Weight: 49 kg

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: Sinumerik 880 total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 0.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 675/260/H290 mm -Weight: 59 kg

Gear motor, electric motor -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 81 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 - Price: per piece -Quantity: 1 available -Dimensions: 490/250/H220 mm -Weight: 35 kg

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 3 kW weight of the machine ca.: je 2,5 t dimensions of the machine ca.: je 332,5 m Bundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor electric motor -Speed: 56 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Brake: 220 V -Weight: 27 kg

x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3 x 2,2 m No. 0104 Universal copy milling machine DECKEL KF 3 S built in 1979 with divided coordinate table Working area: 700 x 560 x 450 mm Drive power: 3 kW Accessories: Divided coordinate table Finishing spindle Locking arm Control handle with cable Stylus holder Collets Space requirement 3 m x 3m Weight approx. 2,380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,5 x 2 x 2 m No. 3934 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 Tool holder SK 40 Speed range 2000 rpm Rigid table Documentation On request / optionally available: -Universal table / fixed table - Hydraulic machine vice - Tool cabinet - Rotary table Ø 380 mm -Cutting attachment -Collets and arbors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 1200 mm

Machine Details Stock-No. 1105-04018 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 V3 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min Face Stroke 400 mm Tailstock Quill Diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information NEF 600 V3 FROM 2011 acc.: hydr. 3-jaw chuck 380 mm, chip conveyor, coolant 3 AXIS WITH LIVE TOOLS 3 AND 10 FIXED TOOLS

geared motor, electric motor -Speed: 120 rpm -Power: 3.0 kW -Design: B3 angle -Shaft diameter: Ø 35 mm -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 730/260/H240 mm -Weight: 63 kg

Gear motor, electric motor -Speed: 29 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: IP 65 -Weight: 44 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 500/260/H210 mm -Weight: 34 kg

Gear motor, electric motor -Speed: 87 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 475/175/H180 mm -Weight: 20 kg

Brand NN Year of Make: 2021, New/Unused Dimensions LxWxH (mm) 10.000 length ( 4000kg) Number of units in stock 5000 Terms of sale Contact us

Used Waldner rotary machine type Dosomat 2.3. New 1997. Three track cup packer. Cup diameter fi 95 mm.

Key data: 730 mm, 560 mm, 560 mm

Machine Details Stock number 1105-04019 Machine Type Milling Machine - Universal Make DECKEL-MAHO Type DMU 60 MONOBLOCK Year of manufacture 2004 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Cargo base EX WORK Price Technical details x-travel 630 mm y-travel 560 mm Information With CNC control Heidenhain I TNC 530 FIVE AXIS MACHINE , 24-fold tool changer, r With CNC control Heidenhain TNC 530, 24-fold automatic tool changer, Technische Daten / technical details: Longitudinal travel X / X-travel longitudinal 730 mm Cross travel Y / Y-travel cross 560 mm Vertical travel Z / Z-travel vertical 560 mm Spindle taper SK 40 Speed range / spindle speed 20-12000 rpm Feed speed / feed range 20-20000 mm/min. Rapid traverse xy/z / rapid feed xy/z 30/20 m/min. table 1000 x 600 mm max. workpiece wei ...

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

• Stainless steel pharmaceutical version for mixing predominantly powdery materials and for granulating after the addition of binding agents • Gross capacity 122 litres, usable capacity approx. 37 - 100 litres • Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal • Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-blade, one-piece, drive with air gap seal • Container jacketed for heating/cooling (without separate heating/cooling unit) • Product temperature sensor • Blind flange for retrofitting a DIOSNA Mixing Probe • Lockable opening in the container lid for adding mixing components • Nozzle for adding liquid • Screw cap with degassing/venting filter • Pneumatic outlet, can be swivelled off for cleaning • HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurised enclosure protection class E Ex p (T4), manufactured by Gönnheimer, type ...

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 510/270/H220 mm -Weight: 36 kg

gear motor, electric motor, electric gear motor -Speed: 29.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 380/200/H210 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg

control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 3 + 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 3 / 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: 130 mm -Plating: brass -Hole spacing: mm -Tip height: 95 mm -Drawings with the photos -Price: per piece -Number: 2x available -Dimensions: 380/350/H110 mm -Weight: 15 kg

Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg

electric motors: DECKEL FP 3 2803 / FP 4 2 power capacity: 1,58 / 1,4 kW volt: 163 / 175 V ampere: 10,8 / 9,3 A weight of the machine ca.: 100 kg dimensions of the machine ca.: 0,80,60,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 power dimmers 5 Regulator Photo on request Picture on request

weight max. in kg: 2500 kg stroke: ? mm fork length: 1100 mm total power requirement: ? kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 250 mm -Recess diameter: 205 mm -Bolt circle: 226 mm -Weight: 22 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm -Height: 120 mm -Groove: mm -Dimensions: 660/680/H120 mm -Weight: 129 kg

Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg

SPECIFICATIONS: A. Grinding unit with 3 rollers Reel 1 - 85 Shore Reel 2 - 65 shore Reel 3 - 55 shore Max. grinding width mm: 1350 Max. working thickness mm: 170 Diameter of the rollers mm: 250 Extraction system KW 5.5 Sanding belt mm: 1370 x 2620 B. Brush unit with 4 units Unit 1 - transverse, counter-rotating bogies Aggregates 2 and 3 - Longitudinal brushes Unit 4 - counter-rotating bogies Hydra V - PAD electronic control Equipped with 5 motorized Mahros conveyors width mm 1350 for workpiece selection and return

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 520/210/H290 mm -Weight: 33 kg

Key data: 55 KW, 300 1/min

Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled

Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 25 kg

MIG/MAG hose package, -Hose package: for robots, welding device -Length: 3 m -Euro plug -Water cooled -Weight: 3.7 kg -Price: per piece -Number: 1x available -Weight: 4 kg

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

Dough divider weigher Model: Stress Free Divider VS - VX 021 Bread weigher in stainless steel design Weight range approx. 200 to 1200 g Hopper approx. 80 kg for doughs with high TA Touch control Output adjustable ca. max. 800 pieces/hour Machine mobile with 2 brakes Belt Flourer and Belt Scale Connection 400V, 16A-CEE plug Machine More bakery equipment in stock!

MIG/MAG hose package extension, intermediate hose package -Length: 5 m -Dinse plug -With: gas hose -Weight: 11 kg

Ground cable for shielding gas device, electrode device -Length: 8 m -Version: Dinse plug, gas hose, control cable, -Cooling: Water-cooled -Weight: 24 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: 2314 -Connection: 220 V 210 W -Heating capacity: -Total length: 1500 mm -Price: per piece -Number: 2x available -Weight: 2.2 kg

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough depending on the TA Dough machine with flour dust cover 2 tank cars with tilting device 2 gears, with protection circuit Connection 400V, 32A-CEE plug Machine Many more lifting kneaders in stock!