czech used for sale

Medals Czechoslovakia Champion of the West Bohemian Region 1960, Badge Communist Youth League, Pin Day of Construction Workers 1959, Cap Badge, Sports Badge 1960, Pin Spartakiade 1960, Badge Red Cross PZO, Case

Circulation coins Czechoslovakia 1x 10 Heller 1932, 1x 3 Heller, 4x 5 Heller, 40x 10 Heller, 18x 20 Heller, 22x 50 Heller, 36x 1 Crown, 13x 2 Crowns, 6x 3 Crowns, 7x 5 Crowns, total 147 pieces

Silver coin Czechoslovakia 100 CZK Ice Hockey World Championship 1985 pp silver .500 roughweight 9 gr, encapsulated, sealed, KM117

Circulation coins Czechoslovakia from 1921 3x 5 Heller 1927-1938, 5x 10 Heller 1927-1938, 3x 20 Heller 1921-1924, 4x 25 Heller 1933, 3x 50 Heller 1922-1927, 6x 1 Krone 1922-1924, 1 H - 1 Krone 1953, 3x 1 Krone 1957-1959, 1x 2 Kronen 1948, Bohemia and Moravia & Cechy a Morava 1 Krone 1933, 10 Heller, Slovakia 2x 50 Heller 1941 1943, total approx. 38 pieces

Circulation coins Czechoslovakia from 1921 10 H - 1 Crown, from 1950 20 pieces

Circulation coins: 10x Czech Republic, 1x Slovakia, 4x Slovenia

Coin Set Czechoslovakia 1991 1 Heller - 5 Crowns + 10 Crowns Masaryk, st, total 18.88 Crowns

Coin Set Czechoslovakia 1992 1 Heller - 5 Kronen + 10 Kronen Razin, st, total 18.88 Kroner

Coin Set Czech Republic 1993 1 Heller - 50 Crowns, st, total 88.80 CZK

Coin set Czech Republic 10 CZK Stefanik 1990 u 1993/ Masaryk 1991 u 1993 Razin 1992, unc., total 50 CZK

Silver coin Czech Republic 200 crowns Alfons Mucha st, silver .900 rough weight 13 gr, KM114, mintage 10.100 pieces, encapsulated

Silver coin Czech Republic 200 crowns St. Vitus cathedral 1994 proof, silver .900 rough weight 13 gr, KM11, mintage 27.500 pieces, encapsulated

Medal Czech Republic Prague: Karluv Most 1994 50 mm, 54 gr, silver plated, gilded with inlaid coin, encapsulated

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR  ...

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Machine Details Warehouse number 1105-03598 Machine Type Machining Center - Vertical Brand VERNIER GSP TRENS Type CV 800 Year of construction 1995 Control type CNC Control NUM 1060 Storage location HAGUENAU Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 800 mm y-travel 610 mm z-travel 508 mm Table size 1050 X 420 mm Spindle holder ISO 40 Drilling capacity in St 60 - Full drilling 45 mm Thread cutting up to M 24 Speed range - infinitely variable 6000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Distance spindle/table 100 - 608 mm Number of tool magazine slots 30 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11 kW Control NUM  ...

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Machine Details Stock number 1105-03787 Machine type machining center - vertical Make TRENS Type MC 100 VA Year of construction 2000 Control type CNC Control HEIDENHAIN TNC 415 Storage location FRANCE Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 1015 mm y-travel 610 mm z-travel 508 mm Table size 1080 x 580 mm Spindle holder ISO 40 Drilling capacity in St 60 - solid drilling 45 mm Tapping up to M 24 Speed range - infinitely variable 20 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Spindle/table distance 100 - 608 mm Number of tool magazine slots 40 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11/16.5 kW Control HEIDE ...

CATALOG NO. 6913 TECHNICAL DATA - track width 360mm - roller width 350mm - max disc diameter 350mm - disc hole diameter 80mm - max cutting height 120mm in advance: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure roller from down: - 2 sliding rollers in front of the table top - runner - pawls - caterpillar - central lubrication of the track - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - feed motor about 2.5 kW - main engine 30kW - overall dimensions length/width/height 2500x2300x1900mm - weight about 4000 kg ADVANTAGES – Czech production – 2 sliding rollers in the top - used multi-blade - very good condition Net price: PLN 59900 Net price: 12882EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with large ...

SULAK BTS 01 ALPHA glass beveling machine was manufactured in 2014 in the Czech Republic. The easy-to-use glass grinding machine is designed for levelling and grinding flat or rounded edges of, among others, glass and mirrors. The machining of workpieces with a thickness of 3 to 12 mm is performed with water cooled diamond discs and polishing discs. Depending on the design of the diamond disc, the processed glass edges can have a trapezoidal profile, a flat profile or a C profile. The total weight of the machine is 280 kg. Technical data of the SULAK BTS 01 ALPHA glass edging machine - minimum glass size (L x W): 200 x 200 mm - maximum glass thickness: 12 mm - minimum glass thickness: 3 mm - spindle speed: 2800 rpm - number of spindles: 1 - power supply: 3x 400 V; 50 Hz - power: 1.6 kW - dimensions (L x W x H): 3060 x 750 x 1700 mm - BTS 01 ALPHA machine weight: 280 kg

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...

Used labeling machine made by Exelsior Karvina s.r.o. (Czech Republic)

Flat wafer oven CHSW64-58 Made in the Czech Republic Price € 40,000 Year of construction approx. 2000 Location: Poland - Number of baking plates: 58 - Panel size: 460 mm x 290 mm - Blade thickness: 5.1 mm Only the baking machine without any additional accessories is sold. Haas / Hebenstreit

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Control: manual 3-axis Manual Read-Out Max.travel range: X 600 mm Y 400 mm Z 400 mm Clamping table: 400 x 600 mm Spindle speed ? 63 - 3150 rpm Taper ? SK 40 Made in Czech Republic

Control: TMJ Max.cutting range: 360 x 305 mm Cutting speed:10 ? 100 m/min Saw band dimension: 3660 x 27 x 0,9 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Czech Republic

Part Number: 7804 SPECIFICATIONS - track width 350mm - shaft width 330mm - 300mm disc fitted - max blade diameter 400mm - blade bore diameter 70mm - max cutting height at the blade 400mm, 150mm - table top dimensions: 2240x770mm –in advance - Flers/ratchets - Slide shaft - Flingers - smooth, sliding roller - shaft with saws - 2 sliding rollers, pressure shafts – from below - roller in front of the countertop -Guide -Triggers -caterpillar - central track lubrication - electric shaft lifting with 0.75kW saws - electric body lifting 0.75kW - infinitely variable feed speed regulation - Diameter of the extraction port 320mm - main motor 45kW - overall dimensions l/w/h 2280x1820x2040mm - weight 2850kg ADVANTAGES – Czech production – used multi-saw – DTR documentation – very good condition Net price: 62900 PLN Net price: 149 ...

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...

PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm -  ...

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 23.950, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 40/33 P

ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...

SMERAL TRNAVA LEN 63C eccentric press was built in 1988 in Czechoslovakia by Šmeral Trnava. It is an extremely reliable machine designed for cold metal forming. It is capable of performing operations such as precise punching, stamping and bending of workpieces. The high press force of 63 tonnes, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 45 and 140 strokes per minute and its stroke is adjustable in the range from 10 mm to 105 mm. With its very rigid C-shaped design, the SMERAL TRNAVA LEN 63C also provides excellent stability during even the most intense challenges. All this makes the offered press an excellent choice for the production of parts with high repeatability and excellent precision. The LEN 63 C eccentric press weighs 5850 kg. Technical specifications of the SMERAL TRNAVA LEN 63C press - maximum press force: 63 t (6 ...

K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum size of the machined part mm 1330 x 900 x 595 Max. weight of the machined part kg 5000 Axis travel X/Y/Z/U/V mm 800 / 600 / 400 / 150 / 150 Diameter of the wire used mm 0.15-03 Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone 22.5 / 100 mm Accuracy class of ball screws rpm C1 - highest Filtration system capacity l Main tank 1630l, secondary tank (Z=600) 1280 l Max. cutting speed mm/min 250 Dielectric conductivity measurement Auto – 5 ~ 200 kW-cm Dielectric temperature measurement Auto with accuracy 1C Power input kVA 15 Machine footprint mm 4350 x 3600 Height mm 2740 Machine weight approx. kg 8500 • Windows CE control system (described above) • vertical leveling device • paper filter 2 pcs • deionization resin - 1st fill • deionizati ...

Siemens 1AV3164C 1LE10031DC422GB4-Z three-phase motor motor 11kW For sale is a Siemens 1AV3164C 1LE10031DC422GB4-Z three-phase motor – used, but in good, functional condition Technical details: Model: 1AV3164C / 1LE10031DC422GB4-Z Power: 11 kW Voltage: 230/400/460 V, 50/60 Hz Efficiency class: IE3 (high efficiency) Degree of protection: IP55 Design: IMV1, size 160L Weight: 125 kg Made in the Czech Republic Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg

The machine is in good technical condition, after prior agreement it is possible to test it. There is a complete manual in Czech and German. We also have a probe and accessories (vices, clamps, collets, mandrels, etc.)

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

For sale is a brand-new, unused industrial pump in the premium class: a KSB Etabloc (model: ETB 065-050-125 GGSAV11D200402) in a compact block design, directly driven by a highly efficient Siemens energy-saving motor. The KSB Etabloc series is the global industry standard for maximum reliability with a small footprint. Since it is a block pump, the impeller sits directly on the extended motor shaft. This saves valuable installation space and makes the time-consuming alignment of the coupling completely superfluous – put it down, connect, run. Perfectly suited for water supply, refrigeration systems, air conditioning systems, heating systems and various industrial processes. Highlights of this unit: Condition: NEW & UNUSED – ideal as a directly available replacement pump or for new projects (no long delivery times from the manufacturer!). Compact block design: Small space ...

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left

TOS KURIM FNK 25A vertical milling machine was built was built in the Czech Republic by TOS KUŘIM – OS, a.s. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as precise drilling and milling of workpieces with a maximum weight of 200 kg. The machining process is performed by a reliable spindle, moving in three axes X,Y,Z with feed of 800 mm, 370 mm and 450 mm respectively. The spindle speed is adjustable from 56 to 4500 rpm, enabling precise adjustment of the parameters to the type of workpiece. The TOS KURIM FNK 25A also enables machining at various angles, thanks to its tiltable workhead. All this is complemented by a compact yet extremely rigid design that perfectly dampens any vibrations and ensures maximum process stability during even the most intensive challenges. All of this makes the TOS KURIM milling machine  ...