cylindrical grinding used for sale

Cylindrical roller bearings -SKF: NU 418 -Outer diameter: 225 mm -Inside diameter: 90 mm -Width: 54 mm -Price: per piece -Number: 2 pieces -Weight: 11.9 kg/piece

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT

Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece

Cylindrical roller bearings -Type: NU 204 E -d = Inside: 21 mm -D = Outer diameter: 46 mm -B = Width: 13 mm

Cylindrical roller bearings -Type: NUP 2314 -d = Inside: 70 mm -D = Outer: 150 mm -B = Width: 51 mm -Weight: 4.75 kg

Cylindrical roller bearings -Outer diameter: 72 mm -Inner diameter: 35 mm -Width: 23 mm

Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available

Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm

Cylindrical roller bearings -Outer diameter: 150 mm -Width: 35 mm -Inner diameter: 70 mm

Cylindrical roller bearings -Type: 30313 Price: per piece Quantity: 3 available -Weight: 2.4 kg

Auction-ID: A1-48754-30

Immediately Overhauled and Used Cylinder Head

Refurbished and Used Cylinder Heads

Refurbished and Used Cylinder Heads

Sorfort available Refurbished and Used Cylinder Heads

Sorfort available Refurbished and Used Cylinder Heads

Immediately available used cylinder head.

max. wheel diameter: 200 mm gear width: 400 mm max. module: 4,5 min. module: 0,3 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 800 mm grinding length: 4000 mm Control: SIEMENS Simatic OP3 grinding wheel diameter: 800 mm spindle speeds: 0 - 70 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical Roller Bearing with Inner Ring KOYO 1523FC108787CYCS315FPP6 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1100 x 1100 x 450 mm Inner ring dimensions (packaging): 970 x 940 x 550 mm

Cylindrical Roller Bearing with Inner Ring KOYO 1523FC108787CYCS315FPP6 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1200 x 1170 x 650 mm Inner ring dimensions (packaging): 970 x 940 x 550 mm

Cylindrical Roller Bearing with Inner Ring SKF 312967 DA Inner Ring 312964 / VU001 Inner Diameter: Ø 750 mm Outer Diameter: Ø 1075 mm Width: 400 mm New ! Cylindrical roller bearing dimensions (packaging): 1270 x 1170 x 550 mm Inner ring dimensions (packaging): 1000 x 930 x 550 mm

grinding diameter: 300 mm grinding length: 600 mm workpiece weight: 80 kg grinding wheel diameter: 508 mm Control: Siemens type: 840 C grinding spindle speed: 45 m/s power capacity - grinding motor: 7,5 kW z-axis: 865 mm x-axis: 250 mm centre distance: 1000 mm number of turns of spindle head: 1-800 U/min total power requirement: KVA weight of the machine ca.: 4,85 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used packaging line for ready-made packages using a weighing feeder with a labeling machine for cylindrical packages. New: 2008. The line consists of: - conveyor for empty packages - weighing dispenser - two weighing heads - bucket feeder - conveyor for full packages - closing machine - rotary table - labeller for cylindrical packages in the labeller set: module for labelling around the perimeter + pressure strip labelling head AGJ 1200 160 250 product sensor mounting stand « single-sided mounting frame Technical data: Dimensions 5.2 x 2.6 x 2.3 m Power consumption approx. 5kW Power supply 400V - 3 phases Continuous operation yes Accuracy / Efficiency +/- 1% of the average weight range / approx. 20 packages/min. (depending on the size and type of product) Compressed air demand 30 l/min The line is designed for packaging products in plastic containers with a capacit ...

x-travel: 350 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 280 mm spindle taper: SK 40 : 150 - 1660 U/min feeds: 25 - 285 mm/min rapid traverse: 1 m/min quill stroke: 80 mm milling-head swivable +/-: 45 ° total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm centre height: 180 mm length: 3600 mm width: 1650 mm height: 1800 mm weight of the machine ca.: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: INA, cylindrical roller bearing. SL04 5020PP, unused, original packaging -Type: INA SL045020-D-PP -Item no.: 1031 4147 M-08-02-05 -Outer diameter: 150 mm -Inner diameter: 100 mm -Width: 67 mm -Number: 6x cylindrical roller bearings available -Price: per piece -Dimensions box: 160/160/H70 mm -Weight: 3.8 kg/piece

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm -Inner diameter: 150 mm -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing, double row, unused -Type: NNU4976 E1 -Outer diameter: 520 mm -Inner diameter: 422 mm -Width: 140 mm -Number: 3x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 520 x 140 mm -Weight: 60 kg/piece

WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 515 mm   workpiece weight between centers (max): 500 kg   workpiece weight flying (max): 120 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 515 mm   grinding length: 1500 mm TABLE -CYLINDRICAL GRINDING-   tilting range (B-direction) min: 8.3 °   rotating range B-axis up to: -4 °   longitudinal travel: 1680 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 14 /min   spindle revolutions (max): 114 /min   number of gears: 2   drive power: 1.5 kW   tool fixture: MK 6 TAILSTOCK   sleeve stroke: 40 mm   taper: MK 5 SPINDLESTOCK GRINDING SPINDLE   tilting range (B-direction) min: -10 °   rotating range B-axis up to: 10 °   drive power: 15 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 630 mm   borehole: diameter: 203.2 mm   width: 125 mm DIMENSIONS  ...

MAX DIAMETER 800 , MAX MODULE 10

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

- Capacity : approx. 4 500 litres - Filling capacity : approx. 3 000 -3 500 kg - With slow-running special agitator Equipment: - Remaining drain ball valve NW 65 - Clear drain : NW 40 - Oval manhole . Kosthahn - Stand display - Dom NW 300 - In good condition Dimensions: Diameter: 1700m Height of curved bottom: 200mm Sheath height: 2'000mm Total height: approx. 2,800mm

GOODWAY GRW-4010 Traveling head Cylindrical grinder YOM 2018 About 600 working hours Control Mitsubishi M70 Distance between centers 1030 mm Max. swing over table Ø 420 mm Max. load between centers 750 kg Max. external grinding diameter Ø 400 mm Roundness 1.5 µm Machine positioning accuracy 2 µm WHEEL SPINDLE Swivel angle 0°~35° Wheel O.D. x width x I.D. Ø 610x Max.100x Ø 203 mm Wheel spindle travel 320 mm Min. setting unit 0.001 mm Max. rapid traverse speed 6 m/min. Grinding feed rate 0.001 - 6,000 mm/min. WORK TABLE Swivel angle -3° ~ +8° Max. rapid traverse speed 10 m/min. Min. setting unit 0.001 mm Grinding feed rate 0.001 - 8000 mm/min. WORK-PIECE SPINDLE Servo Spindle motor -Swivel angle Swivel angle +90° ~ -30° Center taper MT#5 TAILSTOCK Travel 35 mm Center taper MT#5 MOTOR Axes drive motor X-axis 3.5 kW Z-axis 4.5 kW Wheel spindle moto ...

max. wheel diameter: 160 mm gear width: 355 mm max. module: 4,5 min. module: 0,5 centre distance: 450 mm total power requirement: 11 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation The data for this ad wa ...

CONTROLS   CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 350 mm   workpiece weight between centers (max): 80 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 400 mm WORKPIECE SPINDLESTOCK   spindle revolutions (max): 1500 /min   drive power: 3 kW   spindle bore diameter: 30 mm   tool fixture: MK 5   c-axis: yes   - positioning/indexing: 0.5 ° TAILSTOCK   distance betw. centers (max): 400 mm   sleeve stroke: 60 mm   taper: MK 4 SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 370 mm   Z-axis travel: 500 mm   tilting range (B-direction) min: 60 °   drive power: 9 kW GRINDING TOOL   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 63 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx ...

Auction-ID: A1-48232-187

Adapter Coromant Capto - Cylindrical Shank ISO: C8-131-00110-40 Product data: - Adapter interface machine direction -Coromant Capto (segment clampingonly) -size C8 - Axial clamping adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 40 - Maximum cantilever length - 110 mm - Cutting direction - N - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 80 bar - Mounting diameter - 80 mm - Pick-up diameter, workpiece side - 40 mm - Clamping length 102 mm - Function length - 110 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 80 mm - Tool design - steel - Mass (weight) - 2.91 kg per piece Auction-ID: A1-48479-24089

Adapter Coromant Capto - Cylindrical Shank ISO: C8-131-00098-25 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segmentclamping) -size C8 - Axial clamping adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 25 - Maximum cantilever length (OHN) - 98 mm - Maximum cantilever length (OHX) - 98 mm - Cutting direction - N - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 80 bar - Mounting diameter - 25 mm - Holder diameter, workpiece side - 40.8 mm - Clamping length 57 mm - Function length - 98 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 63 mm - Torque 40 Nm - Tool design - steel - Mass (weight) - 3,425 kg per piece Auction-ID: A1-48479-24088

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service