129,403 used machines on RESALE, but how to find them? Machine Search
A total of 23 Mazzer Luigi/Schärf coffee grinders are available. Grinding system: conical, grinding diameter: 71mm, motor power: 900W, speed: approx. 430rpm. Machine dimensions X/Y/Z: approx. 285mm/820mm/400mm, weight: approx. 25kg. Some grinders come with a separate key that will be provided. One grinder is defective. Documentation vorhanden. An on-site inspection is possible.
Number of sanding units: 6 St. sanding width: 180 mm Sanding height max.: 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----------------------------------------- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Meat grinder K+G Wetter Operating voltage: 400V / 50Hz Control voltage: 24V Power: 38kW
Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Voltage: 220V / 50Hz Power: 2.2kW
Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Dimensions: 980x605x900mm 320kg/h Voltage: 220V / 50Hz Power: 2.2kW
Height=1.37 m, Overall length= 0.8 m, Overall width= 1.2 m, Net weight= 674 kg,
80 litre, Stock number: R1234, Litre: 80, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Grinder, Standing: On wheels, Motor: 7,5 HP - 380 Volt, Dimensions: L 1310 x W 660 x H 1170 mm., Manufacturer: Butcher Boy, Model: 100/42
Stock number: R1237, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mill, Standing: Table model, Motor: 2,2 kW - 230 Volt - 1500 rpm., Theoretical capacity: 50 kg/h., Dimensions inlet: Funnel Ø 250 mm., Dimensions outlet: 50 x 70 mm., Model: 2200, Type: Grain Grinder, Other: Variable slot width
Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V
Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm
Used spices in glass jars with grinder production line. Cartoning Machine The UNILINE AU-10-TA-R TF600x400x1500 automatic packaging line consists of: 1.TA-R grouper. 2.TF600x400x1500 tunnel. 3.UNILINE packaging line. Control cabinet containing the control equipment. This machine was designed and built for the production of bulk packaging of a given product. Packaged product types: •Grinder on a 2x3 foil tray with rim. •Grinder on a 2x2 foil tray with rim. •Grinder in 2x3 foil. •Grinder in 2x2 foil. •Grinder in 2x3 foil. •Grill tube in 2x3 foil. Grill tube in 2x2 foil. Sealer The machine consist of: •Feeder •Sleeve applicator head •Guide rollers •Sleeve ejection assembly •Format change kit •Infeed screw mechanism •Feeder assembly •Sleeveless package ejector assembly •Applicator pin assembly Optic check The s ...
Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...
A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.
Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg
Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet
Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg
Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg
Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,
AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany
CONTROLS conventional WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 150 mm material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1 spindle revolutions (max): 610 /min GRINDING SPINDLE 2 spindle revolutions (max): 610 /min COMPONENT-FEEDER Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS space requirements -left/right-: 5230 mm space requirements -front/back-: 4460 mm total height: 3600 mm total weight approx.: 11000 kg Machine is dismantled and stored
CONTROLS CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 180 mm material thickness max. - throughfeed grindin: 30 mm grinding width max. - plunge cut grinding: 180 mm material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored
Height=1.15 m, Overall length= 0.95 m, Overall width= 0.7 m, Net weight= 215 kg,
Height=1.27 m, Overall length= 1.3 m, Overall width= 0.7 m, Net weight= 277 kg,
Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 1000 mm grinding width: 600 mm vertical travel: 350 mm TABLE (SURFACE GRINDING) table surface (left-right): 1360 mm table surface (front-back): 550 mm workpiece load (max): 1000 kg SPINDLESTOCK GRINDING SPINDLE spindle revolutions (min): 1000 /min spindle revolutions (max): 6500 /min GRINDING TOOL type of grinding tool: wheel diameter (min): 500 mm borehole: diameter: 203 mm width: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 91 kW mains voltage: 400 V mains frequency: 50 Hz ATTACHMENTS (GRINDING) coolant unit: yes - 4500 operating hours - Very good and well-maintained condition - Machine body: Meehanit cast iron - Linear guides - Diamond dressing roller: Ø135x100x52 - Automatic balancing system - Programmable slow, fast, ...
Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg
A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.
Number of sanding units: 2 st. sanding width: 300 mm Sanding height max.: 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 st. sanding width: max. 200 mm Sanding height max.: 7-150 mm Working speed: 8-16 m/min Band Speed: 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----------------------------------------------- Manufacturers Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----------------------------------------------- Price for the above-mentioned machine available upon request! ----------------------------------------------- Note: This machine was previously used in conjunction with a Weinig Variomat ...
Height=1.33 m, Overall length= 1.28 m, Overall width= 0.8 m, Net weight= 418 kg,
Grinder Meissner -Type: AM 130 -Power: 13 kW -Throat diameter: 130 mm -Dimensions: 1250 x 1130 x 1300 mm -2 gears -With mixing arm -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Condition: Used in very good condition, ready to work, overhauled
Height=1.34 m, Overall length= 0.83 m, Overall width= 1.1 m, Net weight= 240 kg,
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325x175x125 mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg
Height=1.45 m, Overall length= 0.9 m, Overall width= 0.75 m, Net weight= 229 kg,
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 1600 mm grinding width: 900 mm workpiece height (max) with largest wheel: 600 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 1600 mm table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE X-axis travel: 1700 mm spindle revolutions (max): 1000 /min GRINDING TOOL type of grinding tool: wheel diameter (max): 500 mm borehole: diameter: 203.2 mm width: 100 mm ELECTRICAL SPECIFICATIONS total power consumption: 30 kW mains voltage: 400 V mains frequency: 50 Hz
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg
Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...
Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 kg, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º
Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest
Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed 255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...
used
Blanchard dia 900 mm Magnetic table dimensions: die 900 mm Motorpower: 25 HP Length : 3300 mm Depth: 1180 mm Height: 3100 mm Weight: 6 ton
Kilia grinder with a throat diameter of 130mm is a reliable and durable device. The design combines high efficiency with good quality of minced meat produced. Mainly intended for grinding fresh and slightly frozen meat and vegetables. Perfect for small and medium-sized production plants. It has two gears, pushing auger, and lifter for 200l meat bins. Manufacturer: Kilia Model: E130, 130mm Height: 1900 mm Width: 2100 mm Length: 1400 mm Weight: 1200 kg Capacity: 230 l Electric power supply: 400V 50Hz 3N Total power: 11/17 kW Throat Diameter: 130 mm
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg
WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl
Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg
Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol
KROMAS VM 200 Mass Grinding Machine -Capacity 200 liters - Motor power (kW): 1.1 kW -Inner diameter 980mm -Soundproof cover -Separation facility -Control / ON / OFF / SAVE / TIMER / Stepless speed regulation -Machine feet -Sliding Stones -Documentation Dimensions: LxWxH 1.5x1.5x1.6 meters / Weight 650Kg
maximum number of results exceeded
please refine your search
