cylinder heads used for sale

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 40 mm -unused -Dimensions: 670/120/H120 mm -Weight: 11 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston: Ø approx. 40 mm -Piston rod: Ø 20 mm -Connection piston rod: M16x1.5 -Dimensions: 55/H260 mm -Weight: 1.45 kg

diameter: 800 mm roll surface width: 1800 mm heating system: Sattdampf 0 0: 860 Liter 0: 5 bar max. temperature: 168 ° C weight: kg range L-W-H: 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2x cross perforation cylinders 16" in good condition. Available immediately

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection M 16 x 1.25 thread) -Total length: 220 mm -Total length extended: 245 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Weight: 2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 63 mm -Piston rod: Ø 20 mm -Total length: 260 mm -Total length extended: 300 mm -Dimensions: 75/75/H260 mm -Weight: 2 kg

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-70-0090PPV -Piston: Ø 70 mm -Stroke: 90 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 93/93/H295 mm -Weight: 3.5 kg

Hydraulic cylinder, double-acting, 210bar, stroke 1500mm, D80mm, NS41191534.., Parker, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Parker double-acting hydraulic cylinder, Type: NS41191534/DDHMDRN24M-C1100, Overall dimensions: 1740x130x200mm, approx. 100kg, Stroke 1500mm, Piston D 80mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential d ...

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 305 mm -Total length extended: 385 mm -End position cushioning: adjustable on both sides -Dimensions: 52/H305 mm -Weight: 2.75 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm -Total length: 295 mm -Total length extended: 345 mm -Price: per piece -Number: 1x available -Dimensions: 95/95/H295 mm -Weight: 3.6 kg

Aventics CKP-DA-032-0200-CL-MM00S00BLP000P0P0 Slide Cylinder R480163988 Item condition: Used, in perfect condition You can find more carriage cylinders - new and used - in our shop! International shipping costs on request!

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

RECON MWM TBD 441 Part number: 1217 0190 / 6.440.0.180.021.7 -incl. starting valve Cast: 6.440.0.180.021.0 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 275 mm -Piston diameter: 50 mm -Piston rod: Ø 20 mm -Quantity: 1 available -Price: per piece -Dimensions: 65/65/H530 mm -Weight: 4.85 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Dimensions: 95/95/H345 mm -Weight: 5 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 300 mm -Total length extended: 400 mm -Price: per piece -Number: 1x available -Dimensions: 95/95/H300 mm -Weight: 3.6 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 105 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 357 mm -Total length extended: 462 mm -Price: per piece -Number: 1x available -Dimensions: 96/96/H357 mm -Weight: 6.75 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0140PPV -Piston: Ø 100 mm -Stroke: 140 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 8.5 kg

Type: RTC-DA-032-1000 HC - MBM , Aventics, Rodless Pneumatic Cylinder , Dimensions _1240 , W- 105, H-84mm , New. 12kg with Rexroth guide rails, P-max: 8 bar, piston force 500N, Carriage 170x100mm, 3 T-slots, Several pieces, price on request per number of pieces. NP: approx. 1400,-

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 430 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Dimensions: 95/95/H683 mm -Weight: 1.35 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Total length: 775 mm -Total length extended: 1375 mm -Dimensions: 65/65/H775 mm -Weight: 6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-40-600-PPV -Piston: Ø 40 mm -Stroke: 600 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 55/55/H785 mm -Weight: 3.45 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 600 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 74/74/H835 mm -Weight: 5.4 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Pneumatic damping: adjustable on both sides -Dimensions: 38/61/H210 mm -Weight: 1.05 kg

Short-stroke cylinder, pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -stroke: 50 mm -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Number: 2x available -Price: per piece -Dimensions: 65/70/H95 mm -Weight: 0.65 kg

Hydraulic cylinder with 4 guide columns, BSE 250.40/25.01.4.201.400, Merkle, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, Technical information: - Double-acting hydraulic cylinder with 4 guide columns - Merkle BSE 250.40/25.01.4.201.400, - Piston diameter 40mm, piston rod diameter 25mm - Max. stroke 400mm, max. 250bar 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. O ...

Cylinder 63/28/630 ORSTA TGL 10906/7 W 63 mm Shaft 40 mm. Stroke 630 mm. M22 x 1.5 thread. D hole 40 mm. Length one 85 cm 2 x M22 x 1.5 mm Pressure 165 bar All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Returnable gas cylinders 2 pcs., 1x 11 kg, 1x 5 kg, burner set, empty bottles

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 245 mm -Total length extended: 325 mm -Dimensions: 54/54/H245 mm -Weight: 1.1 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 45 mm -Stroke: 170 mm -Total length: retracted 580 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 2 pieces -Price: per piece -Dimension: 580/95/H125 mm -Weight: 16.9 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Stroke: 385 mm -Total length: retracted 675 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 16 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder single-acting stroke 20 mm -Type:E0400180H30020 T17 / E0400180H 30020 T19 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 220 mm -Hole: 1x Ø14 mm / 5x Ø15 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 50 x 220 mm -Weight: 2.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 250 mm -Total length retracted: 600 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Dimensions: 460/170/H140 mm -Weight: 17.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 940 mm -Total length: retracted 1080 mm -Admission: cylinder: Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Number: 2 pieces -Dimensions: 1080/156/H110 mm -Weight: 24,2 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Round cylinder, pneumatic cylinder, air cylinder -Stroke: 250 mm -Piston: Ø 25 mm -Piston rod: Ø 12 mm -Dimensions: 36/410 mm -Weight: 1.1 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 160 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Total length: 340 mm -Total length extended: 500 mm -Dimensions: 65/65/H340 mm -Weight: 2.25 kg