cylinder head used for sale

Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50 Doka Screw jack U-head Screw jack U-head for height-adjustable connection between load-bearing tower and superstructure. 9.20 kg EUR 37,50

1-head scale

Multihead weigher 14 head incl. flow-wrapper and feeder Condition: very good (used) Year of manufacture: 2023 Functionality: fully functional Description: Multihead weigher with 14 heads incl. flow-wrapping machine, feeding into the multihead weigher and removal belt for the finished goods. Built in 2023 and very little run. The system was bought 2 times at the time because the demand for products had increased at short notice. After a short time, however, it sank again, so that the machine is still almost completely NEW. All in stainless steel (304 SS) Weight range: 10 - 2000 g Speed: 120 bags/minute Accuracy: +-0.1g 220V 50/60Hz 1000 W 14 Heads, 1.6 L Volume, 7 Inch HMI, MCU Control Flow wrapping machine with SIEMENS PLC control, maximum film width 420 mm, bag size: B 60-200 mm, L60-300mm, SIEMENS servo motor, 3 line date printer, bagformer 120 mm ...

Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, gear motor -Spindle head: spindle tool 7.4 rpm -Gearbox: Type Z 8 i = 386 -Engine: Groschopp MDM 100.70 0.25 kW -Shaft: Ø 18 mm -Dimensions: 510/185/H240mm -Weight: 12.3 kg

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials

Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe, probe tip -Manufacturer: Haimer, Long probe insert for 3D probes -Type: 80.363.00 -Size: Ø 8 mm -Case dimensions: 90/40/H20 mm -Weight: 0.1 kg

Universal milling head, milling chuck, milling extension, angle milling head -Manufacturer: Deckel, milling head from milling machine FP4L -Mounting: SK40 -Milling head: swiveling -Tool clamp: electric motor -Individual components: see photos -Transport dimensions: 1690/360/H745 mm -Weight: 548 kg

Connector, plug, pin header, socket header -Connector: 3-pin 54 pieces -Type: 3-pin -Article No.: 10170676 PO5017941 -Price/Delivery: complete -Dimensions: 23/11/H8 mm -Weight: 0.02 kg/pc.

From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...

Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4 -Shaft: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder -Type: SH 3/4 -Shaft: Ø 40 mm -Dimensions: 265/130/H160 mm -Weight: 7.1 kg

Extruder S 100/24D. Battery head 12 ltr. Nozzle diameter min/max 160 / 330 mm. Clamping force 62 tons. Max. mold size: length 1,300 mm, width 900 mm. Depth 2 x 250 mm. Opening min / max 500 / 1,400 mm

Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand

multi-spindle head, multi-spindle drilling head, drilling gear -Multi-spindle head: 5 spindles -Hole: Shaft Ø 20 x 25 mm -Drill holder: Ø 6 mm -Dimensions: see photos -Total dimensions: Ø 120/165 mm -Weight: 2.0 kg

Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Max. saw blade diameter: 400 mm Pneumatic material tensioners

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...

for 6 - 10 t excavator

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

Overhauled battery head 12 ltr in very good condition

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Thread cutting head: self-opening thread cutting head -Type: Model A3 -Shaft: Ø 40 mm -Dimensions: 118/12/H170 mm -Weight: 3.7 kg

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Solo Crown corker Arol with 8 capping heads capacity: approx. 18.000 bph incl. cap feeder year of manufacturing: 2019 delivery time: Oktober /November 2026 The machine can be inspected any time.

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

BR20 , Sandvik As good as new, see photos!

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Used dough divider / head machine KÖNIG, type: Mini Rex 4000 - AB -in bakery condition- - Tested and cleaned - Strap in very good condition - Condition: Good, ready to use - Video on request - Number of rows: 2 rows - Output: max. 4,000 pcs./h - Weight range: 25 - 130 g - El. Connection: 1.3 kW, 3x 400 V+N, 6 A, 50 Hz Visits and test runs are possible by arrangement.

centre height: 130 mm spindle bore: 18 mm ratio: 40:1 swivellable: - 10° bis 90° ° groove width: 16 / 18 mm weight: 35 kg dimensions of the machine ca.: 0,5 x 0,25 x 0,25 m Condition: unused: Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer

Offer 20148 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

2x Hohner stitching heads for omega loop. In excellent condition. For Duplo and Horizon booklet makers, etc.

Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.

A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible.

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-321

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-323

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-44803-322

Masterfill Filling Machine S 500, The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products., Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards., The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill ...

diameter range 6 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 600

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500