cylinder head machine used for sale

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine.

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

General Description Complete robotic MIG/MAG welding cell integrated by VARSTROJ d.d. and equipped with an OTC Daihen FD-B4L six-axis robot. The system includes a twin-station positioner, VARSTROJ VPS 4000 DIGIT welding power source, torch cleaning station, robot controller, safety enclosure and operator station for automated welding production. Technical Details Integrator: VARSTROJ d.d. (Slovenia) Robot: OTC Daihen FD-B4L (6 axes) System model: FD-B4L-2DM/1G/MIG Year: 2013 System No.: 1026312 Welding process: MIG/MAG Power source: VARSTROJ VPS 4000 DIGIT (400 A @ 50%) Positioner: HZP300/EO / P250 NV Power supply: 3 × 400 V / 50 Hz Connected load: 50 kVA Compressed air: 6 bar Torch cleaning station: J. Thielmann TFC-4000/DE Condition Good used industrial condition. Complete robotic welding cell with robot arm, welding power source, positioner, torch cleaner, safety ...

Horizontal turning machine manufactured in 1999. This SEIGER SLZ570x2000 features a swing over bed of 570 mm and a turning length of 2000 mm. It is equipped with a Siemens SINUMERIK ManualTurn control unit and offers a spindle speed range of 1-3000 rpm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ570x2000 machine we have for sale. Contact us for further details.

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

This 5-axis Gildemeister GP 50 was manufactured in 2004. It features a twin-spindle configuration with independent electrospindles and a continuous C-axis on both spindles. The machine includes two independent Sauter turrets with a total of 24 tool positions, all suitable for driven tools. If you are looking to get high-quality turning capabilities, consider the Gildemeister GP 50 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Goodway GLS-2000LYS was manufactured in 2022. It features a spindle speed of 4,500 rpm and a robust 12-station driven turret. The machine includes an 8 hydraulic chuck with a bar capacity of 65 mm and a 5 sub-spindle. If you are looking to get high-quality turning capabilities, consider the Goodway GLS-2000LYS horizontal turning machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TRUMATIC L3030 was manufactured in 2002. It features a powerful 3,200 W CO₂ laser, with a working area of 3,000 x 1,500 mm and a maximum workpiece weight of 710 kg. The machine is equipped with Siemens Sinumerik 840D CNC control, ensuring precision in cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L3030 CO₂ laser cutting machine we have for sale. Contact us for further details.

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Gear grinder REISHAUER OZA with change gears.

Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

This 5-axis Sodick AQ300L wire EDM machine was manufactured in 2004. It features a maximum workpiece weight of 660 lbs and a wire diameter range of 0.006 to 0.012. The machine is equipped with linear motor drives for enhanced precision. If you are looking to get high-quality electrical discharge machining capabilities, consider the Sodick AQ300L wire EDM machine we have for sale. Contact us for further details.

This 5-axis Zayer FP-10000 Bed Type Milling Machine was manufactured in 2006. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 4,200 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 10,000 × 3,000 mm and a maximum table load of 30,000 kg. If you are looking to get high-quality milling capabilities, consider the Zayer FP-10000 machine we have for sale. Contact us for further details.

Milling machine Este

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETELY RENOVATED

For vegetable

FIXED BED MILLING MACHINE "CORREA" FEATURES: Dimensions • Table dimensions: 2,000 x 630 mm • Number of T-slots: 6 • T-slot dimensions: 18 mm Axis Travels • Longitudinal travel X: 1,800 mm • Cross travel Y: 800 mm • Vertical Z Travel: 800 mm Head • Head model: Manual universal • Tool clamping: Hydraulic • Taper: ISO 50 • Speed range: 25 – 3,250 rpm • Mandrel power: 16 Kw Machine feeds • Working progress: 5 - 5,000 mm/min • Fast feeds: 8,000 mm/min Weights and dimensions • Max. weight on table: 3,000 kg • Approx. machine weight: 10,000 kg • Machine dimensions: 4,920 x 2,714 x 2,417 mm

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...

The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter 280 mm; Max. turning length 550 mm; Swing over bed 570 mm; X / Z travel 241 / 640 mm; Y-axis travel ±50 mm (total 100 mm); X / Z rapid traverse 30 / 30 m/min; Bar capacity 61 mm; Spindle interface A6; Max. spindle speed 4,700 rpm; Spindle power S1 / S6 (40%) 20.9 / 27 kW; Torque S1 / S6 200 / 257 Nm; Turret 12 positions, VDI 40; Driven tools: Yes; Driven tool speed 4,000 rpm; Driven tool power 8 kW; Driven tool torque 40 Nm; Tailstock: Yes, Morse 5; Max. workpiece weight 350 kg at max. 1,000 rpm; Dimensions L × W × H 3,875 × 2,122 × 2,345 mm; Machine weight approx. 7,700 kg.

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

This 3-axis Gildemeister CTX 400E was manufactured in 1998. It features an X-axis travel of 220 mm and a Z-axis travel of 635 mm. The machine is equipped with driven tools and a counter-spindle for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400E horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller

This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details.

Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details.

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

Reference Num.: 4378 Brand: Ryobi Type: 3302 HA Construction year: 1999 Impressions: 40 mio Size: 340 x 450 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 340 x 450 mm Printing speed: max 10,000 sheets/hour Printing units: 2

Lathe Weiler

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

Grinding wheel dimensions: Ø300 x Ø50 x 76 mm, Height to be rectified: 500 mm, Surface to be rectified: 600 x 300 mm, Grinding head motor power: 5.5 HP, Weight approx.: 2.000 Kg

Lathe Kari E2N

Key data: 1 mm

Notching machine Make: Euromac Type: 220/6 R Year of Make: 1999 Material thickness: 1-6 mm -Hydraulic knife clamping device, with 2 hydraulic cylinders -Cutting unit with 3 guides -Reversible blade, means: positive cut: start of cutting at the front negative cut: start of the cut at the back -Variable and infinitely variable cutting angle adjustment -Stop rails with adjustment Weight: approx. 1000 kg Condition as good as new, because almost not used. No guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 bph Ma-No. K071-438 Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 BPH Ma-No. K071-438

ID3858 Furukawa HCR1450 ED year/Baujahr 2015 10.150 hours/hours 15.3 t Blast-hole drill rig; new engine installed approx. 1,490 hours ago; old engine—still functional—included (high crankcase pressure due to worn piston rings); includes a pallet of spare parts (5 hammer shanks, filters, GT51 drill rods, drill bits, etc.); additional drill rods available optionally Blast hole drilling rig, new engine approx. 1,490 hours ago, old engine – still functional is included (increased crankcase pressure = piston rings worn), incl. pallet with spare parts (5 hammer insertion ends, filter, GT51 drill pipe, drill bits etc.), optionally more drill pipe available

we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite

Krones Etima Solomatic Ma-No. K 018-H31

Single screw Extruder Theysohn 63mm

Ref.Nr. 00938 Commercial offer Name of the system: Coordinate welding machine Manufacturer Ideal Factory Model CSR 101 Year of manufacture 2005 Rated power 125 kVA Connected load 125 kVA Open-circuit voltage 9 V Primary voltage 400 V Nominal frequency 50-60 Hz Fuse 200 A Repairs and overhauls These would be the most important repairs. CSR 101 Timing belt for lower table renewed in 2021 Water flow monitor renewed in 2023 Maintenance hoses for cooling renewed in 2022 Welding transformer 2024 replaced and contact surfaces revised on the secondary side Secondary rectifier 2024 sealed and revised 2024 Cooling system cleaned and re-hosed, operation with Addinol Protect extra Battery for control unit renewed in 2024 Proportional valve for electrode force 2025 overhauled Condition of the system under power, can be visited by app ...

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

In a suitcase Auction-ID: A1-50529-265

Stephan UM5 Universal Machine Machine is in good condition according to its age two speeds + pulse button 400V Removable boiler with knife insert The plastic wings in the lid and the knife insert have probably run into each other and scratched more often, but this does not affect the function Video about test run available