cylinder head machine used for sale

Short Description This facility will be available from the end of Oct 2026. A used CNC robot carpentry machine incl. mobile gantry trolleys. - Robot Kuka KR 240-2 C2000 Year of construction 2010 - Linear unit approx. 3m - Portal - 2 sliding slides 4.5x12m (connectable) - Cutting sizes 4.5m x1.2m x24m (height can also be raised to 2m with additions) - Refrigeration unit as good as new - Frequency converter as good as new - PLC Simens S7 - "Small control panel" PLC Simens S5 - Always maintained and checked, verifiable. - Table antieb has a Kuka motor - Under the table is a scraper bottom - 2x swivelling baffle wall - Protective fence 2-3 years old with light barriers etc. with 6 doors - Fence approx. 57m (on request and negotiable) - Additional 1 spare spindle, the same spindle as installed on the robot o Recording HKS 55 o 18KW o New revision parts for the spind ...

Lifting mixer Kemper F 125 ASL extendable - with 2 speeds - with 2 automatic timers - with stainless steel lifting arm - max. 125kg flour or 200kg dough per kettle - with flour dust cover - Boiler with handle

All-in-One Snow shovel, sweeper, screw conveyor Drive via PTO shaft 3 DW hydraulic units Width 2.40 m Lights Good condition, little run

ID3860 Wellco-Drill WD90 year/Baujahr 2007 approx. 1400 hours/hours Crawler-mounted drilling rig, very good condition, 6t pullback force, 3-stage flush pump, engine: Perkins diesel engine (131 kW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig; scope of delivery includes: WellcoDrill WD90 drilling rig, 34 x 3m drill rods, suction hose, suction strainer. Drilling rig on crawler chassis, very good condition, 6t retraction force, 3 stage mud pump, engine: Perkins diesel engine (131 KW), drilling method: flush drilling, achievable drilling depth: approx. 180 meters, powerful and compact drilling rig, scope of delivery includes: WellcoDrill WD90 drilling rig, 34x 3m drill pipe, suction hose, suction basket

Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--

Lifting kneading machine Diosna Capacity: 120 kg dough With protective grille 2 speeds via foot pedal Condition: Repaired

Semi-automatic sealer with manual formatting that seals the bottom and top of cartons with self-adhesive tape.

Paulimot SX4 milling machine with digital display and base frame For sale is a Paulimot SX4 milling machine in neat and fully functional condition. The machine is ideal for workshops, model making, prototype production as well as demanding hobby and small series work. Thanks to its stable construction and digital display, the SX4 enables precise and comfortable work on steel, aluminium, plastics and many other materials. Equipment: Paulimot SX4 Milling Machine Digital display / digital measuring system Stable machine substructure Stepless speed control Drilling and milling function Base frame Ready to use Technical data: Table size: approx. 820 x 240 mm Travels: X-axis: 450 mm Y-axis: 250 mm Z-axis: 320 mm Spindle holder: SK30 Stepless speed control Power supply: 230 V Condition: The machine is in used, well-maintained condition with the usual signs o ...

This 3-axis TRUMPF TruLaser 3030 (3.2 kW) was manufactured in 2014. It features a substantial travel range of 3000 mm on the X-axis and 1500 mm on the Y-axis, making it suitable for various cutting applications. The machine includes a TRUMPF LoadMaster automated sheet loading system for enhanced efficiency. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982

CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine.

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details.

Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

Description: For sale is a professional and ready-to-use universal mixing pump / plastering machine of the type V.E.P. VR6. The machine is absolutely identical to the proven PFT G4. Spare parts, screws and accessories are therefore easily available everywhere and compatible across manufacturers. It runs extremely reliably because it does not have vulnerable electronics. It is an all-round carefree complete package including silo accessories and an enormous selection of mortar and air hoses. You can either fill the machine in the classic way by bagged goods or connect it directly to a silo via the blowing hood supplied. Technical data & highlights: Manufacturer: V.E.P. Baumaschinen Model: VR6 Connection: 400 V high-voltage current Year of manufacture: Unknown (nameplate available, runs perfectly) Application: gypsum plaster, lime-cement plaster, insulating plaster, flowing scr ...

x-travel: 1700 mm y-travel: 400 mm z-travel: 400 mm Control: Siemens 480 D table width: 500 mm table length: 2000 mm total power requirement: 16,25 kW weight of the machine ca.: 4750 kg dimensions of the machine ca.: 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

MAX DIAMETER 1500 MAX MODUL 15

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain TNC 530i turning speed range - milling: 4000 U/min taper: DIN69871+AD spindle drive: 46 kW feed range - spindle head: 10000 mm/min rapid traverse: 25000 mm/min floor plate size:: 30000x3000 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Woeking hours: 9332 Machine number: 5619 Chipconveyor: 2x Angle plates: 4x Box table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAX DIAMETER 640 MAX MODUL 8 TABLE DIAMEER 550

Langguth E 36 XPSP Labeler Labeler for self-adhesive labels, self-adhesive labels Dispensing via vacuum plate mobile on wheels Very good condition, straight from production!

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

We offer here a used fully automatic wrapping machine from BENHIL, type MULTIPACK 5000. Installed format 100x75x35mm, bottom folding. Suitable for filling volume 200-300g. Output: up to 135 cycles/min. depending on product and filling quantity. The machine was regularly checked and maintained according to the maintenance plan by technicians from BENHIL. The scope of delivery includes a discharge belt approx. 6m, pneumatic compensation cylinder and CIP device. Documentation and spare parts as far as available on site. The BH 5000 is still in production until approx. beginning of 2027. Subject to change and prior sale

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details.

This 6-axis TRUMPF TruLaser Robot 5020 was manufactured in 2011. It features a TRUMPF TruDisk 4002 laser source and includes essential components such as an articulated robot arm, rotary/tilt table, and a chiller unit. If you are looking to get high-quality laser welding capabilities, consider the TRUMPF TruLaser Robot 5020 machine we have for sale. Contact us for further details.

This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details.

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Gear grinder REISHAUER OZA with change gears.

Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2020. This ZHAFIR ZERES ZE900/210B features a clamping force of 900 kN and a maximum injection pressure of 2,000 Bar. It has a screw diameter of 32 mm and accommodates molds with a maximum height of 410 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES ZE900/210B machine we have for sale. Contact us for further details.

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETELY RENOVATED

For vegetable

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

A package of five Dürkopp/Adler industrial sewing machines is offered. 1) Dürkopp industrial sewing machine. 2) Adler 220-76 long-arm industrial sewing machine. 3) Dürkopp industrial sewing machine. 4) Dürkopp Adler 767-FA-373-RAP industrial sewing machine, type: 0767 990015, year of manufacture: 1999. 5) Dürkopp Adler K767 industrial sewing machine. Inspection possible by prior arrangement.

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm