cylinder block used for sale

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Key data: 2000 KW, 2500 kVA, 400 V

2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.

Key data: 75 KW, 112 kVA, 400 V

Buderus Gas CHP EN 70 MAN E0836 E302 Gas electricity and heat generator from 2014 with 81,648 operating hours. 1 available 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Gas CHP Engine: MAN E0836 E302 Serial Number: 100006776 Power [KW]: 75 Year of Make: 2014 Hours: 81,648 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 30692/5 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 440

Krones can filler blocked with Ferrum can seamer Krones Mecafill with 30 mechanical filling valves Year of manufacturing: 1991 Ferrum can seamer F 308 R (with 6 seaming heads adapted / modified by Imetta / Italy that the can plates are also turning with the machine). Capacity: approx. 14.000 cph by 500 ml standard cans approx. 18.000 cph by 330 ml standard cans can type: standard cans / can type: 211 / 202 with Siemens S 5 with CO2 injection system before seaming The machine was in production until October, 15th 2025 in a brewery in "South Tirol" / Italy. It was professionally dismantled by a German comany and it's now on our stock

Dynapac BT90 motor block / vibration drive, Technical specifications:, - Manufacturer: Dynapac, - Type: BT90, - Power: 5.5kW, - Speed: 2100 min⁻¹, - Year of construction: 2011

Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.

Key data: 664 KW, 830 kVA, 400 V

Running hours 60,000

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Key data: 150 KW, 220 kVA, 400 V

Sokratherm Gas-CHP GG 140S oE Gas electricity and heat generator from 2010, with approx. 60,000 operating hours, with control and silencer. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Sokratherm Model: GG 140S oE Type: Gas CHP Serial Number: F103064 Engine: MAN E2876 E312 Electrical power [KWel]: 140 Thermal power [KWth]: 216 Gas capacity [KWgas]: 392 Year of Make: 2010 Operating hours: approx. 60,000 Weight unit [kg]: 2,850 Dimensions LxWxH [m]: 3.00 x 0.9 x 2.4 AC Generator Marelli MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MJB2572GT68MO Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 317 Speed [1/min]: 1,500 Year of Make: 2010

Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.

Pass-through press for glued glue ITALPRESSE PL/9 Shelf length 3000mm Shelf width 1300mm Number of vertical cylinders 6 Pressure of 90t vertical cylinders Diameter of vertical cylinders 70mm Number of horizontal cylinders 6 Heating shelves with a high-frequency generator The line consists of: -Material feeding section -Glue application section -Material loading section -Press PL/9 -Material receiving table CE Certificate Line dimensions 740x770x235cmH Weight about 8000kg

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Vacuum filler bloc Stork/Zalkin 32/8 with 32 filling valves and 8head screw capper running direction: from right to left with frequency inverter with safety housing for 0,2 - 1,0 ltr. bottles

Key data: 70 KW, 63 kVA, 400 V

HAATS Gas CHP G 50 K Gas electricity and heat generator from 1999 with unknown operating hours. 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA C44.1 M3, 63 KVA Manufacturer: HAATS Model: G 50 K Type: Gas CHP Engine: MWB 12 NA-K (Mercedes engine block) Serial Number: GS50-113VLFN03089901 Power [KW]: 76 Power [KWel]: 50 Year of Make: 1999 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 360 x 120 x 200 AC Generator Leroy Somer LSA C44.1 M3 Manufacturer: Leroy Somer Model No.: LSA C44.1 M3 Type: AC Synchronous Generator Serial Number: FF089446/02 Power [KVA]: 63 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 91 Speed [1/min]: 1,500 Year of Make: 1998 Weight [kg]: 315

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

Block production line HENKE - Type 140/100/40 - Board size 140 x 100 x 4.5 cm (all-plastic boards) - Control Siemens S5-115 U - uncl. 25 Molds Stone fabrication machine with facing & core concrete = Paving stones, kerbstones, kerbstones, U-stones, hollow blocks & solid block bricks can be produced - Min. product height 50 cm, max. product height 400 mm HENKE-Vibra-Matik vibration: infinitely adjustable Compaction by adjusting the imbalances - Waterjet system for product refinement, lifting ladder payload 10,000 kg, Transfer platform with skip carriage Board shelf: front track countersunk ladder, clearing lane, packager, board brush, board turning cross Rear track: Lore track, Euro pallet beaver, vertical & Horizental binding machine incl. packer and strapping system

Key data: 20 KW, 400 V

Vaillant Gas Generator (CHP) Eco Power 20.0 Gas electricity and heat generators from 2016 with 52,214 operating hours, closed unit. 20 KWel x 1,540 rpm, 400 V/50 Hz. CHP Vaillant Eco Power 20.0 Manufacturer: Vaillant Model: Eco Power 20.0 Type: Gas CHP Serial Number: 21161100100186070936000041N6 Power [KWel]: 10 – 20 Power (50/30°C) [KWth]: 29 – 44 Year of Make: 2016 Hours: 52,214 Weight unit [kg]: 867 Dimensions LxWxH [m]: 1.90 x 1.05 x 2.00

Key data: 20 KW, 400 V

Remeha Gas Generator ELW 20-43 Gas electricity and heat generator from 2014 with 51,151 operating hours. Closed unit with control. 20 KWel x 1,527 rpm, 400 V/50 Hz. Model No.: ELW 20-43 R0048 Type: Gas Electricity and Heat Generator Serial number: SK0714A-ETWD-020136 AC generator (asynchronous): Weier DASGM 225/45 AC Generator Speed [1/min] 1,527 Engine: Toyota Power [KWel]: 10-20 Power [KWth]: 29-46 Voltage [V]: 400 Current [A]: 37.5 Frequency [Hz]: 50 Year of Make: 2014 Hours: 51,151 Weight unit [kg]: 880 Dimensions LxWxH [cm]: 165 x 105 x 200

EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo ., Usage: Frozen Block cutter for butter and similar products, Electrics: 3~ / 400 v/50hz, Air: 6 bar -8bar

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment

For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.

Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system

Prakma Book block gluing machine

Yer of manufacture: 2019 Power source: 400 V AC / 50 Hz / 3 PH Main breaker: 400 A Hydraulic pressure: 170 bar / 2465.65 PSI Pneumatic pressure: 6 bar / 87.02 PSI Power: 160 kW Highest manufacturable product height: 250 mm Required installation area (base area): approx. 32 × 18 m Required ceiling height: 8 m Capacity, Production per cycle: approx. 1.2 m² paving stone approx. 2.1 m² rustic stone (semi-finished) Production rate: approx. 1800 cycles per 8-hour shift Contact:  Email: gabor.racz@surplex.com Mobile:+36304509673 Auction-ID: A7-44664-1

Working electric cooking block stainless steel approx. 140x85x80t cm, oven SIEMENS, 4 integrated hotplates, drawer block, shelf compartment

Stone production plant Fabr. OMAG Tronic S22 140-90 Year of manufacture 2005 Price against bid, as the space is needed elsewhere! - with core and intent = for the production of paving stones, slabs, kerbstones, L-stones, etc. Board size 1400 x 950 mm - Min. product height 40 mm - Max. product height 500 mm - compl. Circulation

EMMES pneumatic block gluing press Maximum gluing length 4000 mm Number of vertical clamps 8 Number of frontal clamps 4 Net price

Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Number of vertical clamps 6 Number of frontal clamps 3 Net price

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNA 516-613 -Price: per piece -Number: 2 pieces -Dimensions: 315/120/H170 mm -Weight: 9 kg/piece

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -DSB: Type UCP 211 bearing block -for: 55 mm shaft -Price: per piece -Number: 13 pieces -Dimensions: 220/60/H125 mm -Weight: 3.4 kg/piece

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -SKF: Plummer block housing type SNH 509 -Inside diameter: 57 mm -Price: per piece -Number: 2 pieces -Dimensions: 204/86/H110 mm -Weight: 2.9 kg/piece

Plummer block housings, plummer block housings, bearing block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -FAG: Plummer block housing type SNV 140 -Price: per piece -Number: 4 pieces -Dimensions: 315/140/H185 mm -Weight: 9.4 kg/piece

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4 WEH 32 E 33 / 8LW 220-50 NET -Pressure relief valves: Rexroth type DBW 20 B 2-30 -Dimensions: 560/365 / H335 mm -Weight: 154 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4WEH 22 D 41 / 8LW 220-50 NET -Dimensions: 425/230 / H280 mm -Weight: 44 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF Sunimat 400 punch press Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve Type: FHCG-02-30-N-A100-1004 -Valve Type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc.

for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point -Hersteller.RUD, Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box -Weight: 15 kg / box

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a Hitchi Seiki HC400 machining center -Manufacturer: Nachi-Fujikoshi -Valve type: SL-G01-E3X-GR-Ci-11 -Valve type: SL-G01-C5-GR-C1-11 -Voltage: 110 V -Pressure: max. bar -Price: for all 6 pieces of valves -Dimensions: 158/45/H84 mm -Weight: 1.5 kg

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Manufacturer: SKF -Type: Bearing block SNL 213 -Bearings to be installed: Abbreviation -Quantity: 12x pillow block housings available -Price: per piece -Dimensions: 275/110/H150 mm/piece -Weight: 6.2 kg/piece

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RT2024-1BB40 -Number: 4 switches available -Price: per piece -Dimensions: 85/45/H110 mm -Weight: 0.6 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2011-1GA10 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2411-1EA15 -Number: 2x switches available -Price: per piece -Dimensions: 100/45/H100 mm -Weight: 0.4 kg/piece

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2021-4EA10 -Number: 1x switch available -Dimensions: 100/45/H100 mm -Weight: 0.4 kg

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor -Manufacturer: Siemens, Sirius power contactor -Type: 3RV2015-1BB41 -Number: 1x switch available -Dimensions: 60/45/H75 mm -Weight: 0.3 kg