cw 400 used for sale

Dematic belt conveyor 8105-500/400 Ascending conveyor, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 8,105 mm Width: 500 mm Belt width: 400 mm Climbing belt with bow piece nubbed belt Habasit Task band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 663,5 mm Sheet piece 2: 631,77 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 8105 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich ei ...

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

TS 3115 - gravity roller curve Year 2018 new, unused without posts Width width: 400 mm Angle: 90° Inner radius: 800 mm Blue plastic rolls 19, 10 x 8 rolls + 9 x 9 rolls,. Rolls axle distance: 50 mm Division inside: 65 mm Division outside: 110 mm option 2 supports: OK rolls + 700 mm, height-adjustable available: 2 identical rolls curves. Features: Construction year: 2018 condition: new Nominal / inner radius in mm: 800 Roll width in mm: 400 angle: 90° Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intra ...

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Conveyor belt: with conveyor ribs -Width: 400mm -Length: 7120mm -Transport dimension: 1200/400/H300 mm -Weight: 26 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 400 mm -Cone: Ø 102 - 82 mm -Intake: thread M152 x 4.5 -Through hole: Ø 82 mm -Weight: 54 kg

Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: steel -Number: 2x clamping cubes available -Price per piece -Dimensions: 620/400/H505 mm -Weight: 332 kg/pc.

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: hanger bolts M12 x 400 -Type: M12 x 400 SW 9 fully assembled -Material: stainless steel V2A -Number: 43 pieces available -Price: per piece / minimum purchase 5 pieces -Weight: 0.3 kg/pc.

Product number: 2809B Type: BR2000/400 Serial number: 555 Year of construction: 1987 Belt width: 400 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric Power: 3 x 380V, 50Hz, 45kW Dimensions: 5000 x 1200 x 2750 mm Weight: 1150 kg Hold down belt, circulation pump, sediment removal, manual hoists, prepared for CO2 fire extinguisher With separate infeed conveyor

Circular knives, circular cutting knives, machine knives, replacement knives for cutting machines -Circular blade: Replacement blades for cutting machines -Blade size: 400x30x3 Serial number: 207484 -Number: 3 knives available Price: per piece -Weight: 2.9 kg/pc.

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions: 23 pieces, mostly with connecting pipe -Diameter: 75 to 400 mm -Quantity/Size: see photo parts list -Price/Fee: complete -Transport dimensions. 1200/800/H300mm Total weight: 95 kg

Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request

7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: clamping area: 850 x 400 mm -Holes: Ø 20 mm -Threaded holes: M8 -Dimensions: 850/400/H17 mm -Weight: 41kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: IAI, linear actuator type ISA-LXM-I-400-20-1100-T2-X15 -Stroke length: 1100 mm -Number: 1x linear drive available -Dimensions: 1470/165/H95mm -Weight: 25 kg

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply -Manufacturer: Block, AC/DC Power Supply -Type: GLC 400/24-3 -Quantity: 1x module available -Dimensions: 140/75/H90 mm -Weight: 2.3 kg

Key data: 400 mm, 150 mm, 22 kW

I am selling an industrial planer LEDINEK ROTOLES 400 D-S. Built in 2001. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-45 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 22.0 KW. Feed motor 3.0 KW. Total power 26 KW. Total weight 1800kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Cleaning machine with 6 months warranty Many more TOP bread slicers in stock!

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder 2 pieces -Type: 40 x 27 x 315mm / 40 x 27 x 400mm -Shaft: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 595/130/H70 mm -Weight: 10.5 kg/total

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland

Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 40 x 400 -Shaft: Ø 32 mm -Dimensions: Ø 62 x 590 mm -Weight: 8.6 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm -Weight: 5.9 kg

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...