cw 400 used for sale

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: clamping area: 850 x 400 mm -Holes: Ø 20 mm -Threaded holes: M8 -Dimensions: 850/400/H17 mm -Weight: 41kg

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: IAI, linear actuator type ISA-LXM-I-400-20-1100-T2-X15 -Stroke length: 1100 mm -Number: 1x linear drive available -Dimensions: 1470/165/H95mm -Weight: 25 kg

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply -Manufacturer: Block, AC/DC Power Supply -Type: GLC 400/24-3 -Quantity: 1x module available -Dimensions: 140/75/H90 mm -Weight: 2.3 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

Used greenhouse lighting, manufacturer: DH-Licht, model MGR-K 400-CHD, for sale by bid

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder 2 pieces -Type: 40 x 27 x 315mm / 40 x 27 x 400mm -Shaft: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 595/130/H70 mm -Weight: 10.5 kg/total

Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 40 x 400 -Shaft: Ø 32 mm -Dimensions: Ø 62 x 590 mm -Weight: 8.6 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm -Weight: 5.9 kg

Three knife trimmer Stitching heads (2 x ) Omega stitching heads (2 x ) Feeder (6 x TAL 400) Stacker (Rima) Cover feeder (UFA 400)

Belt delivery Horizontal pile feeder (1x DVU 450) Three knife trimmer (TR 400) Feeder (1x DHU 450) Feeder (1 x TAL 400) Feeder (1 x TAS 400) Cover feeder (1 x UFA 400)

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 400 mm -Type: C1-40/25x400 TGL 10906 -Piston rod: Ø 25 mm -Dimensions: 545/100/H70 mm -Weight: 5.8 kg

PLC control, PLC subrack -Manufacturer: Siemens, Simatic S7-400 module carrier UR1 -Type: 6ES7400-1TA01-0AA0 -centralized and decentralized: 18 slots -Dimensions: 485/290/H30 mm -Weight: 2.9 kg

PLC control, central module, RAM, CPU, central device, positioning module -Manufacturer: Siemens, SIMATIC S7-400 Positioning Module FM 451 -Type: 6ES7 451-3AL00-0AE0 -Quantity: 1 piece available -Dimensions: 215/50/H290 mm -Weight: 1.4 kg

PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital input SM 421 -Type: 6ES7 421-1BL01-0AA0 -Number: 1x module available -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

M. No.: 24 Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

PLC control, digital output, digital input -Manufacturer: Siemens, SIMATIC S7-400, digital output SM 422 -Type: 6ES7 422-1BL00-0AA0 -Quantity: 1x module available -Dimensions: 215/25/H290 mm -Weight: 0.8 kg

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-400, CPU 414-2 WORK MEMORY -Type: 6ES7 414-2XG03-0AB0 -CPU: CPU 412-2 -Dimensions: 215/25/H290 mm -Weight: 1.0 kg

NDT lathe - Böhringer Type VDF 400 Spindle 600-440 mm maximum length 2000mm Tool magazine with 12 tools

for 25 hp tractors ,normal PTO 540 rpm ,instruction manual , replacement catalog ,

PLC control, electronic module, PLC control, control module -Manufacturer: Schiele, control module -Type: SPS 400 -Number: 5x module available -Price: per piece -Dimensions: 260/170/H55 mm -Weight: 1.4 kg/piece

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulle ...

Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 9827 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach m ...

axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg

Try square, locksmith square, hair square, precision hair square, control square -Manufacturer: Hommel, stop angle DIN 875/0 -Type: 600 x 400 mm -Accuracy level: 0 -Dimensions: 615/400/55 mm -Weight: 6.6 kg

Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg

Dematic belt conveyor 7872-500/400 Belt conveyor down, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 7,872 mm Width: 500 mm Belt width: 400 mm Bow piece + backward belt nubbed belt Habasit Tax band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 631,72 mm Sheet piece 2: 66,50 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 7872 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfac ...

Dematic belt conveyor 8105-500/400 Ascending conveyor, drive, shaft mounted gearboxes Built in 2008 Length incl. task band: 8,105 mm Width: 500 mm Belt width: 400 mm Climbing belt with bow piece nubbed belt Habasit Task band smooth strap, length: 733 mm with exaggerated Sheet piece 2 St. kinks adjustable Bow piece 1: 663,5 mm Sheet piece 2: 631,77 mm rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 8105 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich ei ...

TS 3115 - gravity roller curve Year 2018 new, unused without posts Width: 450 mm Angle: 90° Inner radius: 800 mm Blue plastic rolls 19, 10 x 8 rolls + 9 x 9 rolls,. Rolls axle distance: 50 mm Division inside: 65 mm Division outside: 110 mm option 2 supports: Features: Construction year: 2018 condition: new Nominal / inner radius in mm: 800 Roll width in mm: 400 angle: 90° Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-400 -Stroke_ 400 mm -Shaft: Ø 20 mm -Dimensions: 630/60/120 mm -Weight: 6.6 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 935 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without a lap -Weight: 78 kg

Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg

Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber wheel, solid rubber bandage -Tire size: Ø 400 mm -Inner diameter: 276 mm -Quantity: 20 tires available -Price: per piece -Dimensions: Ø 400 x 78 mm -Weight: 5 kg/pc.

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt widths: 15 mm -Length: 400 mm -Adjustable speed: 14-56 m/min -Number: 2x conveyors available Price: per piece -Weight per piece: 88 kg

Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg