cw 400 used for sale

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Groschopp, geared motor -Gearbox: Type E 2 ai= 7 -Speed speed: approx. 400 rpm -Motor: Type WK 0341501 0.12 kW / 2800 rpm -Shaft: Ø 10 x 30 mm -Protection rating: IP44 -Total dimensions: 225/150/H115 mm -Weight: 4.4 kg

Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Reliance Electric, servo motor -Type: H-4050-P-HOOAA -Power: 1.86 kW -Speed: 4000 rpm -Frequency: 0-200 Hz -Technical data: see photo type plate -Shaft: Ø 19 x 50 mm -Number: 4 motors available -Price: per piece -Dimensions: 315/120/H145 mm -Weight: 9.2 kg/piece

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg

Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

For sale is a powerful wood-burning system from the manufacturer ENDRESS, type VR-W 400, built in 2012. The system was used to generate heat from biomass (e.g. wood chips) and is ideal for heating systems in commercial, industrial or local heating networks. Technical data: • Type: ENDRESS VR-W 400 • Year of manufacture: 2012 • Power: 400 kW • Water capacity: 1,800 litres • Operating temperature (max.): 95 °C • Permissible operating overpressure: 3 bar • Boiler class: 3 • Designation according to the nameplate: wood-burning system • Fuel supply: possible via several screw conveyors with electric motors Accessories: • Exhaust gas purification unit • Membrane pressure expansion vessel \"reflex G\" • Various drive units Auction-ID: 03C-BXN-4

Power distribution block. Input 1x Cee Form 400 Volt 32A, 5-pole, Output 2x Cee Form 400 Volt 16A, 5-pole, 1 x Cee of 400 Volt 32A, 5-pole 4x Schuko Type E, 230 Volt, 16A, 3-pole IP protection class IP44. Amperage 16A. Voltage 230 and 400 volts. CE according to IEC60309-2. Length of the supply line 1.0 m. Condition: never used / new (5) Auction-ID: A1-45681-900

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Auction-ID: A1-45681-829

Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30

Belt conveyor belts 2 pieces 1x SCHOLZ KMU3500 400, S/N 206 1 1188, 1x SCHOLZ AMN 2000x385, S/N 080070401.0, electromotive, possibly cannibalized

Electric stacker OM CN14 load capacity 1,400 kg built in 2007, 8,446 Bra (19.03.25), weight 930 kg without battery, battery 247 - 318 kg, 24 V, S/N F24525U00831, lifting height 4,565 mm, mast height 270 cm, internal No. 14

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45832-83

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45832-89

Youtube function and status video: https://youtu.be/3eyfAb14C7g Battery: 20/2019, 24V 375Ah, very good performance measured at 25.7V very clean device from clean laboratory Auction-ID: A1-45450-448

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-Z5ryHlumUY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 24/11/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-309

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/DH2wS9Fzpbs - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 30/06/2020 24V 375 Ah, very good performance measured with 25.1V - Triplex mast with full free lift - Integrated scale Auction-ID: A1-45450-358

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Sp3LMaepGbc - Former Linde full-service device - Battery: 07/11/2017, 24V 3PzS 375Ah, very good performance measured with 24.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45450-359

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-255

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45450-2430

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qokiutHmMJs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 27/09/2018 48V 500 Ah, very good performance measured with 50.2V - 3rd valve; with sideshift Auction-ID: A1-45450-104

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-65

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-65

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-255

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/Qg1_SYz7g8Y - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 30/10/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-305

Youtube function video: https://youtube.com/shorts/NzbfodNF5xA FEM3: Fits any forklift with a load capacity of 3,000-5,000kg Comes from Linde H50D. Year of manufacture: 2018 Payload: 2,400 kg Auction-ID: A1-45450-1122

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qwHVCF8fvcs - Former Linde full-service device - Battery: 21/08/2013 48V 500 Ah, very good performance measured with 48.9V - 3rd + 4th valve with side shift Auction-ID: A1-45450-190

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/bT-c1nNi0pc - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 05/2022 48V 500 Ah , very good performance measured with 50.5V - 3rd valve; with sideshift Auction-ID: A1-45450-222

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HhpvoS_ydmE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:27/08/2013 48V 500Ah, very good performance measured with 50.0V - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - White non-marking tires - Warning light orange - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-139

Long material transport trolley VARIOFIT load capacity 400 kg, dead weight 29 kg, blue/wood

Mini crane BÖCKER MK 400/5, built in 2013, load capacity 500 kg, 400 V, Fabr. No. 5200, known with counterweight, completeness and function n., viewing recommended - PICK-UP ONLY POSSIBLE ON 21.05.2026 from 10.00-11.00 a.m. because crane is still blocked with other items - unless you have a truck with loading crane

Digital Height Gauge MITUTOYO HDS 400 mm

Scribing caliper HOLEX 400 mm, wooden box

Electric stacker YALE MS14AC load capacity 1,400 kg built in 2014, S/N C852T05350M, weight without battery 900 kg, 1.2 kW, battery 274 - 302 kg, 24 V, triplex mast height approx. 185 cm, lifting height 4,627 mm, 3804 discharged. Bra (18.03.25), internal No. 50

Equipped with: CW10 quick coupler, suitable for machines 4/8ton Auction-ID: A1-40135-152

Set consisting of 6 Kärcher HD 4000 industrial pressure washers (3 X 2 times on rack), mounted on metal frame. Brand / Model: Kärcher HD 4000 (E/H) 59-905 NR Year: 2001 Power supply: 400 V – 50 Hz – 3~ Engine power: 7.4 kW Max. pressure: 160 bar Flow rate: 650 l/h Max. water temperature: 60 °C These machines are designed for intensive industrial use Revision to be carried out Auction-ID: A3-43515-33402

54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-373

102 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 75.5 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-376

excl. tools; equipped with Heidenhain CNC control; machine works well but has little play on the X axis Auction-ID: A1-45793-12

84 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 62.1 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-375

72 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 53.2 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-374

24 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 17.7 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-299

42 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 31 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40135-300

https://deko-light.com/search?query=342177 Auction-ID: A1-45889-2727

https://deko-light.com/3-Phasen-Spot---Lucea-10-CCT--Tilt--10-W--DIM-- 3000-4000-K--Weiss--item-DL_DE_707116 Auction-ID: A1-45889-2734

Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures - Auction-ID: A1-45752-7

Label Printer ZEBRA ZM400-200E-4000T, S/N 08J104800872

Industrial Generator / Power Unit – Technical Specifications General data: Power: approx. 690 kVA Voltage: 400 V Frequency: 50 Hz Speed: 1000 rpm Current: approx. 995 A Protection class: IP23 Duty: Continuous (S1) Ambient temperature: 40 °C Power factor (cos φ): 0.8 Weight: approx. 2750 kg Control system: Full control cabinet included Siemens PLC (S7-type) Protection relays Circuit breakers and busbars Description: High-capacity industrial power unit or generator system designed for continuous operation under demanding conditions. Equipped with a complete control cabinet featuring Siemens PLC automation, protection relays, and electrical distribution components, ensuring reliable and safe operation in industrial environments. Auction-ID: A7-46032-3

Unused; rated output 28kW/35kVA; standby 30.8kw/38.5kva; 50HZ P.F. 0.8; RPM 1500; 3 PHASE; Genset controller with LCD; 72L diesel tank; Oil tank 13L; 2 batteries; ATS 100A Aisikai; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7310 Auction-ID: A1-45901-3