cw 400 used for sale

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Transnova-RUF robot Flex Line RV-400 case packer & palletiser, packaging section with infeed conveyor, magazine, erecting/loading robot, carton closing station using self-adhesive tape at the bottom and top, carton discharge with labelling system (2 carton labels at a corner position of the carton), palletising with palletising conveyor (1-3), pallet lift and palletising robot (ALU-EURO pallet (1200 x 800 x 144 mm, loading height max. 1575 mm incl. pallet), max. 5 layers), electrical connection 230/400V/50Hz/3Ph, power consumption max. 10.7 kW, output up 0.65 cases/min or 2.9 pallets/hour

A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 430 mm -Load capacity: 15 tons distributed load -Number: 14 axle stands available -Price: per piece -Dimensions: 410/1200/H430 mm -Weight: 60 kg

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

Lippert belt conveyor GF 13585-550-400 RA2497 Technical data: Conveying length (NL): 13585 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 13585 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individ ...

Lippert belt conveyor GF 12500-550-400 RA2503 Technical data: Conveying length (NL): 12500 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Frequency converter for steples speed control Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 12500 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual,  ...

Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800 x 400 mm spindle taper ISO: Sk 40 spindle turning speed range: 10 - 3150 U/min quill stroke: mm total power requirement: 12,0 kVA weight of the machine ca.: 2,2 t dimensions: 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

Labeler Manufacturer: HERMA Type H 400 8 L Serial No. 20923342 Left-hand device with detaching edge with spring-loaded roller angled 75° (see drawing) Running direction from left to right

Manufacturer: Gildemeister Model: GMX 300 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

Lippert belt conveyor GF 6670-550-400 RA2504 Technical data: Conveying length (NL): 6670 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6670 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

Lippert Belt Conveyor Riser with arch and straight GF 5865-550-400 RA2505 Technical data: Conveying length (NL): 5865 mm (ascending conveyor 2455 mm + arch 3410 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 5865 ( 2455 + 3410 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodri ...

Lippert Belt Conveyor Riser with arch and straight GF 4846-550-400 RA2506 Technical data: Conveying length (NL): 4845 mm (ascending conveyor 4105 mm + arch 740 mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4845 ( 4105 + 740 ) Nominal / outside width in mm: 650 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive  ...

Lippert Belt Conveyor Riser with arch and straight GF 3130-550-400 RA2507 Technical data: Conveying length (NL): 3130 mm (ascending conveyor 2475 mm + arch 655 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3130 ( 2475 + 655 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Z ...

Lippert belt conveyor belt transfer GF 1000-550-400 RA2508 Technical data: Conveying length (NL): 1000 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 1090 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 scope of delivery: without supports and side guides For individual, prof ...

General SKU050F238 TypeGHT-400 :Glatt Horden Trockner: No.101010 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX designedcheckConsumer wastePaints & coatingsPowdered foodsDrying ovensGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubb ...

Key data: 400 t, 1000 mm

LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

General SKU026N542 LocationBarneveld MakeTria (It) Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator Granulatorcheck Rotor width420 mm Rotor diameter400 mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500 x 300mm Hinged topcheck Motor15 kW, 380 Volt MaterialMild steel General Type400/ELR No.33.0441.85 Mounted on framecheck With switchgear(as is) Floorspace1,9 x 1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED -Sieves included: 10 mm, 12 mm, 16 mmPowdered foodsStarchRubberSpicesPlastic & polymersCatalysts & fillersDiscountE-waste & metalSugarPlastic & rubberMinerals & inorganicGranulatorsTriaIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic ...

Bread slicer Treif Diskus 400 Year of Make: 2007 Cutting without oil One-button operating system Areas of application: Crafts, commercial kitchens, supermarkets, bakery branches Dimensions (LxWxH): 800x700x1100 mm Weight: 195 kg Max. insertion length: 400 mm Disc thickness 4-24 mm Max. insertion cross-section (WxH): 330x150 mm Max. 130 sections per min

Professional fully automatic packaging system from a renowned European manufacturer consisting of 3 components: feed belt, fully automatic angle welder and shrink tunnel. The machines can therefore be operated together or individually. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. Feed belt GH 1000 / 400: -Speed infinitely adjustable. -Automatic / manual operation selectable. -Length approx. 1 m. -Usable width approx. 400 mm. -Adjustable side guide. -Height adjustable via machine feet. Fully automatic angle welder FP 6000 CS -The angle welder has several monitoring sensors, light barriers or photocells to control the automatic process, as well as mechanically adjustable product chicanes. User-friendly control panel with extensive functions and setting options such as automatic and set- ...

Wrapping machine Fritsch CRH 120/400 Year of Make: 2015 Approx. 450 operating hours Condition: technically as good as new, visually few signs of wear 1-row operation 400 mm table width Output depending on the size of the piece, the number of windings and the feeding capacity: max. 5000 pieces/h Suitable for line combination

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti) With jacketcheckOils & fatFine chemicalsOther chemicalFeed additivesSolventsDiscountFood additivesLubricants & oleoAnimal feedFalling film evaporatorsBeveragesAPIRutzIndustries > Food & Feed > Oils & fatIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Food & Feed > Feed additivesIndustries > Chemical > SolventsDiscountIndustries > Food & Feed > Food additive ...

This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details.

B+S/Heino Ilsemann Labelling & blister packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute. includes format parts for DIN-ampoules of 1, 2, 5 and 10 ml. and vials with a diameter of 16 and 22 mm.

Key data: 4000 kN

Krauss Maffei KM 400-3000 GX Blue Power with the Krauss Maffei LRX 250 robot Year of manufacture: 2018 Injection unit: Screw diameter: 80 mm Injection weight: 1464 g Spray pressure: 1855 bar Dosing volume: 1608 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 920x830 mm Size of the clamping plates: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. tool installation height: 400/900 mm Air Valve x 4 Hydraulic core pull x 4 Control with hot runners x 36 Self-closing nozzle x 10 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Function for automatic pulling out of the upper spar Machine has been regularly serviced by the authoriz ...

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...

Key data: 5000 mm, 17000 mm, 4000 mm

5-axis CNC Turning and Milling - Year of manufacture: 1970 (modernization: 1984, 2006 and 2015) - Control system: Siemens 840D - Table diameter: 5000 mm - Maximum turning diameter: 17,000 mm - Maximum working height: 4000 mm - Milling length: 8500 mm (movable table) - Table speed (max): 40 rpm (100 kW) - Maximum table load: 100 tons Accessories: - Milling head (800 rpm / 60 kW) - Universal milling head (630 rpm) - Front slider for diameters up to 1000 mm - Grinding equipment - Angle head 90 degrees (630 rpm) - Small 90-degree angle head (450 rpm) - Multiple tools.

Key data: 400 kN

Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our compa ...

Key data: 400 kN

Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis B and C Traversing in ax ...

Key data: 1100 kN

Arburg 470S 1100-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 8 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Conveyor belt integrated with the machine control system Built-in sorting flap It is possible to change the screw diameter Robot Wittmann W711 Year of Make: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-2000 To ...

Key data: 1000 kN

Arburg 470H 1000-400 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Centra ...

Key data: 1500 kN

Arburg 470C 1500-400 with the Wittmann W721 robot Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of Make: 2006 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4 ...

Key data: 1500 kN

Arburg 470C 1500-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Robot Wittmann W711 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Traversing in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps ...

Key data: 1500 kN

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Provider:

Key data: 1500 kN

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control Dimension ...

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...

The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the pla ...

Key data: 4000 kN

Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...

Screw diameter: 55 mm double thread Injectable volume: 582 cm3 Injection pressure: 2200 Column passage: 780 x 780 mm Moulded thickness: minimum: 760mm- maximum: 1190 mm Opening stroke: 760 mm Number Of Cores :2 Robot interface: E67 36 heated zones