cw 400 used for sale

CNC Vertical Machining Center HERMLE C 400 U With track control Heidenhain TNC 640 Year of Make: 2016 Travel distances : X 850 Y 700 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 650 mm x 540 mm ( T Slots for SRT ) Vertical tool changer with 38 magazine positions Additional Magazine 43 Magazine Slots ( ZM 43) KinematicOpt Hardware IKZ 40 bar with paper belt filter Sealing air for scales Police filter IKZ 40 bar Scraper belt conveyor Chip wagon 450 Ltr. Coolant Facility ́ Blow-off device Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electronic handwheel Tool Measurement BLUM Laser 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes Operating  ...

The scope of delivery includes: 01x Open fronted storage boxes, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Interior dimensions: 560 x 360 x 167 mm Opening dimensions: open on one side at the front, 275 x 82 mm (WxH) Handle: yes, single-sided, open Colour: blue Weight | Piece: 1.59 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

Production Year 2015, start use in end of 2015. Used for two Year. Was used with 75kW electric motor. Now it is without motor. Can be used with some diesel motor. Have spare knives. Can input up to 42cm diameter log

A CNC cut-off grinding machine Anthratec, previously used for cutting grids, is available. Cutting speed at 2000rpm: approx. 42m/s, speed range: 500–3500rpm, connected load: 30kW, control: Siemens S7-1200. Documentation available. An on-site inspection is possible.

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the manufact ...

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

table diameter: 400 mm table load: . t table height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.

table diameter: 400 mm table load: . t table height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Small defect on the faceplate, see pictures. The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mm table load: . t table height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mm table load: . t table height: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness  ...

Fully automatic can holder/bottle display from Tölke incl. feeder. Perfectly functional, used in a production until recently. The can display is sold solely because of a change in packaging of the product. 60 pcs/min Adjustable to different formats, currently set to 400 ml round cans. Can also be used for bottles and other cans of any kind The machine can be visited.

Used Shrink Tunnel ULMA, Type: HRX-400 - With output tape - The speed adjustment knob is missing - The temperature control indicator/switch has been replaced. Programming still has to be done, because error is displayed - The heating elements work well and reach the target temperature -El. Connection: 380 V, 50 Hz, 16 kW, 28 A Visits and test runs are possible by arrangement.

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...

grinding length: 500 mm grinding width: 200 mm workpiece height: 300 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ,6 1,5 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle turning speed range: 170 - 18000 U/min weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headsto ...

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=2.1 m, Overall length= 1.45 m, Overall width= 3.25 m, Net weight= 300 kg,

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Height=1.75 m, Overall length= 0.75 m, Overall width= 1.35 m, Net weight= 17 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,

Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,

Height=2.61 m, Overall length= 1.25 m, Overall width= 6 m, Net weight= 2000 kg,

Height=1.44 m, Overall length= 1.15 m, Overall width= 2.6 m, Net weight= 220 kg,

Technical data shown on picture. Parts shown by hand not come.

Laska Mixer -Type: ME 400 ZNV -Power: 7.5 kW -Capacity: 400 L -2 Z-type mixers -Vacuum pump -Tilting hopper -Voltage: 380 V 50 Hz 3N -External dimensions: 2700 x 1500 x 2650 mm -Including loading -Made of stainless steel -Condition: used in very good/overhauled/ready to work

bore capacity in steel (diameter): 25,0 mm throat: 180 mm bore stroke: 80,0 mm morse taper: 2 MK turning speeds: 180 - 2270 U/min table-size: 305 x 305 mm swivelling +/-: 45 Grad T-slots: 16,0 mm column diameter: 72,0 mm voltage: 400 V total power requirement: 1,1 kW weight: 57,0 kg range L-W-H: 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 850 mm turning diameter: 400 mm swing diameter over bed slide: 245 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 260 mm spindle taper: DIN 55029 D 1-5 taper in tailstock: 3 MK quill travel: 120 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1255 kg range L-W-H: 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 cente ...

bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...

wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2.0 kW weight of the machine ca.: 23.0 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing p ...

grinding width: 32.0 mm max. dia. of grinding wheel: 250 mm grinding wheel size: 250 x 32 x 32 mm turning speeds: 2850 U/min Grain size: K 36 / K 80 engine output: 1.5 kW voltage: 400 V weight: 30.0 kg range L-W-H: 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm throat: 260 mm distance between roll centers: 132 mm stroke: 55.0 OW mm tool adaptor: Ø 35 mm, 12 mm Nut mm total power requirement: 3.0 kW weight of the machine ca.: 450 kg. range L-W-H: 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation The data fo ...

pressure: 400 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 510 mm ram stroke speed: 110 mm/sec work speed: 8.4 mm/sec return speed: 130 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 1000 mm table width: 240 mm back stop - adjustable: max. 800 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30.0 kW weight: 26409 kg range L-W-H: 5450 x 2650 x 3470 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 ...

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mm band length: 1490 mm band speed: 8.0 m/sec motor: 400 Volt loading area: 500 x 280 mm total power requirement: 1.5 kW Dimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 135 mm capacity 90 degrees: flat: 280 x 70 mm capacity 90 degrees: square: 120 x 120 mm capacity 45 degrees: flat: 210 x 55 mm capacity 45 degrees: square: 105 x 105 mm turning speeds: max. 3000 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 4,0 kW weight: 650 kg range L-W-H: 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400

Manufacturer: Fässler Model: HMX-400 Year of Manufacture: 2005 Type of Machine : Honing Machine Technical Specifications: - Voltage: 3 × 400 V / PE - Frequency : 50 Hz / 60 Hz - Control Voltage: 24 V DC - Rated Current: 150 A - Connected Load: 95 kVA Find more here - / Contact us at -

Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,

Osai Neomark 400 Nd-YAG Laser Marking Machine Labeling and marking system particularly suitable for high production volumes and printed circuit boards with high packing density. Due to the large working area and the resulting elimination of traversing movements, high-resolution and precise marking is possible, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Volt: 230 V Weight: 1300 kg Laser has been completely rebuilt Engine of Beamexpander renewed All hoses for cooling new More items - new and used - can be found in our shop! International shipping costs on request!

I am selling this machine. It can be tested when connected. The machine is located in the Czech Republic. Very good condition. Price includes dismantling and loading. Rated deformation force 400 t Working area of table 3100 x 6000 mm Max. ram stroke 1000 mm Clearance between columns 3100 mm Output of main motor 15 kW Height of the machine 4170 mm Widht of the machine 4150 mm Lenght of the machine 6000 mm Weight of the machine 44190 kg

x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm table-size: 600 x 300 mm spindle taper ISO: 40 quill stroke: 50 mm spindle turning speed range: 50-400 , 400 - 3150 U/min CNC-control: TNC 135 voltage: 380 V / 50 Hz feeds: X+Z = 5 -1000 mm/min rapid traverse: X+Z = 2,4 m/min feeds: Y = 5 -670 mm/min rapid traverse feeds: Y = 1,6 m/min measuring system resolution capability: 0,005 mm total power requirement: 3,7 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 380 mm control: FANUC 0-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 380 mm control: FANUC 16-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.