cutting used for sale

Output: 1400mm, equipped with welding turntable ø 980mm. Including 1x sheet size ø 1830 x 30mm Auction-ID: A1-49889-249

Type 93576085, Incl. twin hose and pressure reducing valve Auction-ID: A1-50529-537

Auction-ID: A1-44050-70

Oxy-fuel; with various running rails. Auction-ID: A1-49889-122

Oxy-fuel; with various running rails; with swivel arm for gas hoses; Total length approx. 5 meters. Auction-ID: A1-49889-120

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm

Ref. No. 00941 Name of the system Used CO2 laser cutting machine Manufacturer: Amada (Japan) Model LC2415 Alpha III Year of manufacture 2004 Operating hours 23,488 h Working range 2,520 × 1,550mm Laser Unit Manufacturer Fanuc Laser C4000 Laser power 4000 watts Suction Amada Fanuc AF4000E Cooling system Riedel PC315.21 NE The current owner bought the system second-hand in November 2020 Last working day on the machine was approx. End of 2023 Since then until today, the machine has not been used anymore Condition of the facility can be visited on request

Key data: 205 mm, 410 mm

1 gebr. LZS Lathe, TOS SN40B x 1000 mm Technical data (TOS SN 40 B) Center width: approx. 1,000 mm Center height: approx. 205 mm Circumferential diameter over bed: approx. 420 mm (hence the designation "SN 40") Circumferential diameter over flat lower saddle: approx. 225 mm Circumferential diameter in the offset: approx. 600 mm (if equipped with removable bridge) Bed width: approx. 400 mm ⚙️ Spindle & Feeds Spindle bore: approx. 52 mm (ideal for common rod diameters) Spindle mount: DIN 55027 Gr. 6 (with bayonet lock) Speed range: Steps graded, usually from approx. 11 to 2,240 rpm (in several steps via gearbox) Power of the main motor: approx. 6.6 kW (powerful industrial drive) Dimensions & Weight Machine weight: approx. 1,800 kg to 2,100 kg (depending on tip width) Space requirement (L x W x H): approx. 2,500 x 1,000 x 1,350 mm (with 1,000 ...

Mint condition It was only used briefly as a demonstration device Like new Original price 4800,00€ Auction-ID: A1-50540-125

Good condition New air bellows Auction-ID: A1-50540-39

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50533-335

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50533-334

Top condition New air bellows Auction-ID: A1-50540-42

Key data: 3000 mm, 1500 mm, 6000 W

with Bytrans Extended

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Max. cutting width: 920 mm ? Max. cutting length: 920 mm ? Max. pile height: 120 mm ? Min. cut: 25 mm (without false clamp plate) / 90 mm (with false clamp plate) ? Max. clamp pressure: 30,000 N ? Max. cutting speed: 42 cuts/min ? Front table length: 632 mm ? Main motor: 3 kW ? Power supply: 380 V, 3-phase ? Drive: hydraulic

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

electric pile cutter with automatic pressing, 380V, back gauge adjustable by hand crank, measuring scale on the front table, optical cut indication, table model (without base)

Connection: 230V Year of Make: 2020 Serial Number: 0272287 Auction-ID: A1-50632-251

Powertherm Evo-Cut 120 Plasmaschneider Plasma Cutter Mint condition, unused Auction-ID: A1-50625-6

ID3867 Fantini 70 RA/P year/Baujahr 2020 1.300 hours/hours Cutting saw, sword length 2.7 m, swivel head (vertical and horizontal), with 3 guide rails and transport/lifting device Shearer saw, blade length 2.7m, rotating head vertical and horziontal, with 3 x working rails, transport/lifting device Price: on request

Connection: 230V Year of Make: 2020 Serial Number: 0272139 Auction-ID: A1-50632-253

Connection: 230V Year of Make: 2019 Serial Number: 0264738 Auction-ID: A1-50632-252

Year 2014, equipped with milling head Kongsberg ArtWor Complete with vacuum system and unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-2

must be demoted yourself lifting bridge and forklift is available and can be used machine is in working condition Auction-ID: A3-46129-11479

provided with 2 cutting supports, 1x waterjet cutting support (Y1), with Hi Precision P-75S water jet pump, 1x plasma cutting support (Y2) with Hypertherm XPR300 plasma source with cooling, 1 allfi waterjet abrasive hopper, Teka Handycart PP-DC 1.2 kW burner extractor, 2x MSNC RO2 control unit, 1x control box, type: RS, 1x Pc console, and main control box. Includes workbench and steel cabinet with accessories. Auction-ID: A1-49889-19

table load: 1,950 kilos per m, equipped with Enduromax waterjet pump, equipped with Pentar water softener, 1x Alup Vario screw compressor, (2008), 1x Trd 11 freeze dryer, 1x Atlas Copco oil / water separator, 1x abrasive storage silo, 2x dump hoppers and Pc console. Includes 1 pallet with cutting table edges and workbench with accessories Auction-ID: A1-49889-18

Including Cyklos KSL 435 manual creasing/grooving machine, Cyklos CP 20 calendar thumbcut punch machine, Cyklos MC 6 hole puncher and NOVUS B 40 stapling machine. Auction-ID: A3-50009-350

Bj2019, equipped with High-Power milling unit. Complete with vacuum system, cooler IBAG and mobile unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-1

CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details.

Art-No. 967649101 for Husqvarna Rider R420 TsX AWD New, has not been used yet Auction-ID: A1-50452-15

Well-preserved plasma cutting machine with 6,000 × 2,000 mm working area, Kjellberg plasma source and Donaldson-Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine Type: Plasma Cutting Machine Year of Make: 2016 Working range: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Availability: Machine is in operation and can be viewed Location: Rottweil The seller can help with loading.

Laser Engraving Machine Specifications: Powerful 60W Laser engraving machine with autofocus, hepa filter installation (separate) and a worktop of 950x460mm. Worktop can be extended by the doors at the front and rear. For engraving and cutting many materials and laser marking metals. 230V. Features: Complete with rotary attachment, honeycomb blade. Particularities: Machine is in very good condition and well maintained. Auction-ID: A1-47362-112

Cutting plotter for cutting foils and paper. Machine is in very good condition and well maintained. With collection tray. 230V Auction-ID: A1-47362-111

2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of Make: 2012 Working area: 3,000 x 13,500 mm 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console

Standard configuration Machine ⦁ Working Range 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Motion unit for high precision processing ⦁ Gantry drive in combination with direct linear drives ⦁ Chiller for machine cooling ⦁ Integrated cabinets ⦁ Wide longitudinal conveyor ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ External Solid-state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination Control ⦁ Sinumerik 840D SL ⦁ ControlLine ⦁ Easy shop floor programming ⦁ Fast post production ⦁ 19 To ...

Standard configuration ⦁ Solid-state laser TruDisk 3001 with air-cooled chiller and pilot laser (switch) ⦁ LLK with 100 µm ⦁ Focusline ⦁ Optics recognition and magnetic coupling ⦁ Sinumerik 840D control system: Open control on PC basis ⦁ Fixed suspending control panel ⦁ Teach panel with teach software Additional equipment ⦁ Laser cutting: including 2 cutting gases (02, N2), APC distance control, programmable cutting gas selection, adjustment device, analogue value cutting, pressure adjustment, valves ⦁ Dynamic cutting optics f = 150 mm incl. sensor ⦁ FastLine Cell ⦁ LLK 30 m ⦁ Special suction unit

AGIE CHARMILLES CUT 3000 ist eine Drahterodiermaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 850×550 mm; Werkstück max 1050×650×250 mm; Tischbelastung 800 kg (400 kg mit Bad); Verfahrwege X 500 mm, Y 350 mm, Z 256 mm; Kegelschnitt ±30°; Draht Ø 0,10–0,33 mm; Oberflächenwert Ra 0,05 µm; Dielektrikum 1000 l. Technische Daten: 5 Achsen; Tischhöhe 1100 mm; Druckluft 6 bar; Versorgung 3×400 V 50 Hz; Leistung 9 kVA; Gewicht ~3800 kg; Abmessungen 2685×2115×2247 mm. Erreicht enge Toleranzen; Branchen: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 17 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

\"Face Cutter (Face Cutter 5) SCHNEIDER MASCHINENBAU Year 1987, Working Width: 1,800 mm, Autom. Stacking Type 3551, SN 515-1098, Table Load: approx. 300 kg, Autom. Stacking Type 3543, SN 514-1098, Table Load: 300 kg\" Auction-ID: A1-50608-1

WJS NC 3000 T waterjet cutting machine was built in 2002 in Sweden by Water Jet Sweden AB. The high-pressure pump working with the machine has been regularly serviced using only the manufacturer’s original parts. The WJS NC 3000 T is designed for the precision 2D cutting of workpieces made from metal and non-metallic materials, such as ceramics, glass and acrylic. Cutting is performed using pure water or water with an addition of abrasive. The machine is equipped with four cutting heads. The third and fourth heads are mounted on a common Z-axis, with a spacing of 80 mm. This solution allows simultaneous cutting with three heads, which increases cutting efficiency and reduces production time. The WaterJet NC 3000 T is operated using an intuitive NUM 1040 CNC controller. The equipment also includes, among others, an abrasive tank with a feeder and a 100 HP high-pressure pump. All t ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Auction-ID: A3-46134-5660

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50534-334

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 19 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50534-335

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ One cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer, lengthwise installation ⦁ Longitudinal conveyor ⦁ Ergonomic control panel with Touchscreen ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ PlasmaLine Trumpf Laser ⦁ CO2-Laser TruFlow 3200 with optimized standby Modus ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC 3 ⦁ Laser power control ⦁ Logbook function Laser Laser cutting head ⦁ Laser cutting head with 250 mm lens ⦁ Universal quick-change device (UTI) incl. bus connection ⦁ LensLine ⦁ ControlLine: Height regulation and sh ...

Machine including Liftmaster.