cutting used for sale

Polar D 56 ECO, Year 2025 Display Program Table Table left Table right Etc. Available: at short term

Inv. Num. : 8487 Type: ENSIS 3015 AJ Producer: AMADA Created: 2019 Parameters: Maximum power: 6 kW Switch-on hours: 19,588 h Operating hours: 10,631 h Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

Bread cutter with circular knife for cutting oven-fresh products without the use of oil! for approx. 35cm loaves of bread with approx. 25cm width and approx. 15cm height Lens thicknesses from 4-24mm selectable Output approx. 130 sections per minute with bread rack for bagging with safety cover completely stainless steel clad Dimensions: W 80 x D 70 x H 110cm

Manufacturer:BIERREBI Model: TA103 Year of Manufacture: 2002 Type of Machine : Automatic cutting machine for knitted fabrics Condition : very little used Overlaying, marking, cutting, stacking, and counting. All these operations are now integrated into the TA103 automatic cutting system. The TA103 automatic cutter requires only one operator to position the garment pieces. All other tasks can be performed automatically with high precision and remarkable operational simplicity. With the TA103 automatic cutter, everything is simplified, faster, and more cost-effective. Bodies, sleeves, raglans, cardigans, polos, striped garments, solid colors, plaids, and marked garments can all be processed. The TA103 allows for precise and consistent cutting quality without the need for highly specialized labor. Machine production capacity: Produces up to 960 sleeves per hour Produces 90 to 150 ...

x-axis: 550 mm y-axis: 350 mm z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm volume: 1200 L inclination: +/-30°/400 mm dimensions: 1200x700x400 mm weight: 1500 kg wire dia.: 0,10-0,33 mm Bobbin Weight max.: 25 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bystar 3015 4.4KW CO2 Laser very good condition at call

HSG Fiberlaser Model Laser Power G12025FA 12-60kW Working range : 12100×2500mm or G12035FA 12-60kW Working range : 12100×3500mm o Up to 45 degrees 3D machining optional. Perfect to replace your old plasma cutting machine. 12-60kW Cutting Head 3D(Optional) Max. Linkage Acceleration 0.5G Max. Linkage Speed 80m/min more information on request

Mazak NTX 48 Turbo CO 2 Laser cheap MAZAK laser cutting machine NTX48 1.5kW Year of Make: 1998 well-preserved, overhauled MAZAK laser machine with 1500W Panel size: 2500mm x 1250mm Minimum installation area of 2.6m x 6m Completely encapsulated machine cover FE: up to 15mm VA: up to 6mm Plastic possible Wood possible incl. software incl. suction Machine was completely overhauled by Mazak 1,000 hours ago (lenses, mirrors, oils). Includes Acer Laptap with software Si Cam including dongle Video on request To be visited under power

Machine configuration 1. 6kw Raycus Fiber Laser Source 2. HSG Laser Cutting Head P10 3. HSG Alpha T-Bus Control 4. HSG-NEST nesting software 5. Monitor with touch function 6. Aluminum crossbeam 7. Hiwin Linear Guide 8. Inovance servo motor and driver 9. SMC Oxygen Control Valve 10. Collision protection 11. Automatic lubrication 12. Ergonomic remote control 13. WLAN / LAN connection 14. Electronic components from Schneider, Eaton and Noark 15. Pneumatic components from Aventics 16. Fault monitoring of the main machine, laser source as well as chiller 17. Cutting gas low pressure alarm function 18. Water Chiller 19. Extraction system Interchangeable table system: 1500mm x 3000mm Further configurations are available with regard to the fiber laser power output and the processing area

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

3 KW Fiber Dimensions round cross-sections (min.–max.) 10–130 mm Square dimensions Cross-sections (min.–max.) 10 × 10–130 × 130 mm Dimensions of other cross-sections (min.–max. length of sides) 10 × 10–130 × 130 mm Max. pipe weight 17 kg/m Loading length 6,500 mm Unloading length 4,000 mm Cross-sections round, square, rectangular, oval, closed standard profile very few hours

CNC Plasma Cutting Machine MGM Arrow 2000-4 , Year 2008 Control: MS 100 Working Area : 2000mm x 4000mm 1 x Plasma Kjellberg HiFocus 160i with automatic gas console - incl. extraction 5500m³ built in 2006 / MGM - incl. declaration of conformity - incl. tech. Documentation - Incl. various nozzles (spare parts) at call

Bystronic Bysprint 3015 Fiber 4 KW Working area : 3000mm x 1500mm With interchangeable table Laser on: 21,000h Including Airco nitrogen generator at call

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Color display - TouchScreen - Program - Air table - Side table with air left - Mounted lift right - 2 HSS blade - with the existing accessoires

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Manufacturer: Eckert Model: Jantar Year of Manufacture:2010 Table size: 3x6 meters 2 Hypertherm XPR 120A high-definition plasma cutting heads Pipe cutting attachment Exhaustor system One plasma source has had parts removed and requires replacement components. The machine is fully operational with one cutting head. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tilting double miter saw for chair elements with loader TECNOSYSTEM - CE

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

BOTTENE shaft mounted cut-off saw - complete with roller conveyor

Manual bench miter saw with mm blade. 350

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request

Granulator - Shini SG-2324-CE (2 pcs.) Year of Make: 2010 Location: Lodz, Poland Description: Slow-speed granulator with gearbox, with cyclones and dedusting Power: 6 kW 2 stator blades, 6 rotor blades, the sieve - interchangeable Hopper inlet: 260x240 mm Grinding chamber opening: 240x240 mm Automatic feeding of the regrind to the big bag Soundproofed mill All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Color display - Program - Air table - Resopal side table with air left / right - Spare knife

Polar 78 N ECO, Year 2025 Display Program Airtable Airtable left Airtable right Etc. Available: at short term

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

CNC Portal Flame Cutting Machine Manufacturer: Bach Type: ACK-2D Year of Make: 2006 CNC Control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel burners

Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions

welding current: 20 - 100 A cutting capacity: max. 35mm mm open-circuit voltage: 250 V Required air-pressure: min. 4 bar connected load: 20 KVA connected load frequency: 400 V weight: 0,7 kg Dimensions (LxWxH): 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 1500 mm, 4000 W

3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading

welding current: 30 - 100 A cutting capacity: max. 50mm mm open-circuit voltage: 170 V Required air-pressure: min. 4 bar connected load: kW connected load frequency: 400 V weight: 0,75 kg Dimensions (LxWxH): 1,2 x 0,7 x 1,0 mm Plasma cutting machine with cart - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.

Cevenini Log Cutter Model M200 1.5m wide x 200 mm diam. Complete with motor

A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.

used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.

turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 1000 mm turning diameter in the gap: 850 mm turning speeds: 15 - 810 U/min centre height: 300 mm spindle bore: 56 mm total power requirement: 9,0 KW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request