cutting used for sale

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 face slide travel: 290 mm upper slide travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Machine designed to cut pepper and other vegetables into strips and dices Manufacturer: URSCHEL Model: J Power: 5 HP Current cut size: 10x10x10 mm dices Overall dimensions: 2,500 x 1,100 x 1,450 mm (L x W x H) Belt width: 240 mm

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

used bread slicer Wabäma R400 E, overhauled, with circular blade, for below counters

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Bystar 4020 Year of construction 2006 4.4 Kw with pipe cutting axis very good condition

SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm

Air table 2 side tables 2 knives Photo cells Program

Wohlenberg Guillotine with spare knife, in very good production ready condition. Gives exact cut and everything operational. Can be used to cut other materials rather than paper, such as vinal, plastic, tin, etc.

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

Precision cutting unit IMA Type: 08.376

Unit for grooving / precision cutting Make: IMA

Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Paul, Year: 1999, Type: Strangsäge, Control: NCK 3 , Program: yes, Cutting depth mm: 19 X 600, Working hight mm: 16-19, Positioning accuracy mm: 0,3, Feeding speed max m/min: 60, kW output saw motor: 5,9, wood lenght max mm: 3000, Saw Blade Diameter mm: 530, Year :1999

Manufacturer: Hüllhorst, Year: 1995, Type: Kranzprofilsäge, Control: Ferrocontroll, Cutting depth mm: 250, Working hight mm: 120, Feeding speed max m/min: 60, Feeding speed continous adjustable: yes, Slewing range degrees: +45-45, Work piece length max mm: 4500, Kw Leistung Sägemotor: ca.4, Loading stations: yes, Waste conveyor: no, Saw Blade Diameter mm: 500, Length to slide in mm: 5000, Drill head vertical controlled: yes, Spindles: 8, Drill head vertical controlled spindles: yes, Collet chuck: yes, Optimisation: yes, Maschine vorführbereit: yes, Year :1995

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

table length: 3050 mm table width: 1530 mm burner heads: 1 stroke: 290 mm speed: 120 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

M. No.: 7361205 Format (cm): 78 Equipment / Additional information: Safety barriers, side tables, air table, 1x reserve knife

Max. workpiece length ... 3000mm Max. workpiece width ... 1500mm Max. sheet thickness... 12mm Laser power... 2000W Total power requirement ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

920 x 920 ED - Program Control Colour monitor Air table Formica side tables with air Spare blade

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

Rego Herlitzius Kobold Bread Slicer Bread Slicer 10mm 230V - Creel machine - on castors - with lubrication - Cutting width 10mm - for max. 42cm loaves of bread Specifications: - Manufacturer: HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61 cm Depth: approx. 60 cm Height: approx. 115 cm

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Key data: 4000 mm, 2000 mm, 10000 W

4000 x 2000mm with Bytrans Extended

Key data: 3000 mm, 1500 mm, 12000 W

3000 x 1500mm - Extended cables for Mezzanine layout

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm

Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB

Brand Hegla Type Cutting table Layered Fashion model VSG-H Serial Number 1104 Construction year Jun-95 Weight 3 tons Assets 19 kW Air pressure 6 bars Water pressure: 50Hz Length mm 3700 Width mm 3400 Working height mm 980 Min.-max. glass thickness 2 x 3mm to 2 x 6mm Number of cutting heads 2 cutting heads Separation heating and air cushion Automatic sequence for cutting, breaking, heating and separating functions. Electric connection 380/ 400V Photos/film available: Photos available

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This grinder has 2 fixed knives and 12 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.