129,060 used machines on RESALE, but how to find them? Machine Search
Specifications: Travels X/Y/Z 400 x 400 x 375 mm Max. clamping area 350 x 800 mm Speed range (12) 50 - 2240 min-1 Feed, infinitely variable 1 - 630 mm/min Rapid traverse, max. 1.4 m/min Total connected load 4.7 kW Dimensions (LxWxH), approx. 1300 x 1215 x 1700 mm Weight with pallet, approx. 1700 kg Equipment: Digital Rigid angle table Coolant Setup
used
- Travel X/Y/Z: 500/500/380 mm - Speed range: 50 - 2240 rpm -Power. 1.8 / 2.6 KW - Spindle brake - Feed: X-Y-Z infinitely variable 1-750 mm/min - Rapid traverse X-Y-Z 1400 mm/min - Rigid angle table 450 x 800 mm - Spindle holder SK 40 M16 (ISO 7388-1) - Weight approx. 1650 kg - Space requirements: L x W x H: approx. 1700 x 1800 x 1800 mm
Universal tool milling machine from Stimin suitable for tooling, fixture making, mold making and training Travel distances : 320x250x300mm Speed :40-2240 rpm Mounting : SK 40 Table 600x210mm Longitudinal travel (X,Y,Z axis) 320x250x300mm Tool holder: SK 40 Vertical spindle speeds: 40-2240rpm Feeds 12-630mm/min Cjsbxicvyt Connection 50 Hz 3x 380V Spindle motor 2.2KW Machine weight approx. 1000kg Dimensions 1200x1900x1000mm
Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)
Mixed Lot of Compression Springs – Larger Diameter / Powerful Versions Category: Springs / Mechanical Engineering / Toolmaking Stock of cylindrical compression springs, stored in approx. 30 storage containers. The springs are mainly labeled according to dimensions (wire diameter × outer diameter × free length). The holdings mainly include medium-strength to strong compression springs, some with larger wire and outer diameters than in previous bundles. In some cases, internal markings / codes are available (e.g. D-xxx, Z-xxx). Quantity / Scope • approx. 30 storage containers • Quantities per dimension not counted • Sale only complete, no single delivery Condition • used / stock & ...
Tool presetting and measuring machine Manufacturer: E. Zoller GmbH & Co. KG Type / Model: Saturn 1 Type plate: V4001-00191 Year of manufacture: 2001 Equipment / accessories (visible): • Basic machine Zoller Saturn 1 • Pick-up plate / turntable • Various tool holders, including HSK 63 • Machine table / substructure with integrated PC housing • Documentation partially available (visible in the substructure)Condition / Note: Machine is partially dismantled. The monitor is missing, and not all components are mounted. Function currently unknown/unchecked. Traces of use present. Sale is expressly made as a hobbyist/spare part or overhaul object. S ...
Item Stock – Standard Parts / Tool Parts (approx. 100 storage containers / packs) The cabinet pictured is not part of the offer For sale is an extensive, mixed stock lot from the field of standard and tool components. The inventory is clearly sorted into approx. 100 storage containers as well as original packaging and comes from ongoing industrial use. Content (excerpt, according to labeling and visual inspection): • Cap screws, countersunk screws, flat-head screws • Shoulder fit screws• Disc springs (e.g. DIN 2093, various dimensions) • Springs / compression springs • Spring-loaded thrust pieces • Guide columns• Spacers / spacer tubes • U-washers, fibro discs • Ball washers • Various toolmaking standard parts (some of them Fibro-marked) Dimensions / thread: • M4 to M12 • Lengths and diameters mixed, mostly labeled (e.g. M5×10, M8×30 ...
chamfer lenght: 3050 - 4020 mm 2 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing tool, sheet metal former, forming tool, straightening tool -Pressing tool: Mounting: Ø 40 mm -Material: 1.2379 X153CrMoV12 cold work steel -Dimensions: 116/83/H340 mm -Weight: 15.6 kg
Pressing tool, sheet metal former, forming tool -Pressing tool: Edge tool -Angle: 90° -Length: 155 mm -Hole: Ø 40 mm -Dimensions: 155/155/H285 mm -Weight: 17.8 kg
3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition
suitable for Peddinghaus profile steel shears Effective length 2,000 mm
length: 700 mm width: 700 mm height: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool transport trolley with shaft carrier Width 1,400 mm x Depth 600 mm Height 1,300 mm with wave carrier Weight approx. 110 kg
Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg
4 - Stations Tool Grinding Machine Pre-grinding - disc 200 x 50 x 5 1mm - table size 400 x 200 mm Regrinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm Lap Cut - Disc / Diamond 125 - 12.5 x 51 mm - Table Size 400 x 200 mm Chip guide - disc -150 x 8 x 51 mm Coolant Setup Task light Engine speed 1,400 / 2,800 rpm Electrical values 380 V / 0.37 / 0.6 KW Space requirement W - 1,100 x D - 1,000 x H - 1,400 mm Weight approx. 340 kg
Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details.
DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)
SK50 Tool Holders on pallet see pictures Auction-ID: A7-46460-528
Key data: 600 mm, 525 mm, 200 mm
Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect
Torque 400-2800 Nm Auction-ID: A1-46480-3072
With contents, various drills Auction-ID: A1-46480-3041
maximum number of results exceeded
please refine your search
3.000 € 
