cutting to length used for sale

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available.

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock

Electric tool changer RASTER Premat EWD20

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump

Tool trolleys, tool holders Dimensions; width x length x height (approx. 100 x 80 x 100 cm) 52 mounts

8 piece welding pliers 1 piece welding control Manufacturer: Düring

Torque test bench Manufacturer: BLM (Atlas Copco) Type: 3730M Built in 2001 All information without guarantee

; ready for operation

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 1000 mm -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 x T 1200 x H 1600 mm - weight approx. 4980 kg

6 x 50/105, right, Ø13 mm 17.40 eur 6 x 50/105, left, Ø13 mm 17.40 eur 8 x 60/115, right, Ø13 mm 17.40 eur 10 x 70/125, left, Ø13 mm 18.00 eur

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

1 of used bottle cap torque tester, make UCP Universal Closures & Plastics. In case.

BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...

1 box with various tool stops turning

Convolute (excerpt) from different tools - see picture

. Size C with cylindrical bore 40 / 50 mm .

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=2140 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Weight: approx. 517 kg Fully assembled as a set included 6 Tool Holders WKH 210 6 Tool Holders WKH 211 5 Tool Holders WKH 212 5 Tool Holders WKH 213 4 Tool Holders WKH 214 4 Tool Holders WKH 215 Dimensions: 1,040 w x 2,140 h x 1,050 t Curb weight: 517 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

Simatic Multi Panel Touch Siemens Siemens MP 277 10 inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 pieces Condition: used Price per piece Width outside: approx. 330 mm Depth outside: approx. 275 mm Width inside: approx. 305 mm Depth inside: approx. 245 mm Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make you an individual offer or advise you on the design or installation questions. Simply let us know your ...

ZM punch grinder

Alu window profiles Punching tool for end hole ventilation 4 stations

Tool holder VDI 30 longitudinal holder Interface size square 20x20 3.3020DSS left overhead Cantilever length (LPR) 100.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 36.00 mm Clamping length, max. (LSCX) 100.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c4-links-ueberkopf-/69496 Condition: New

Pressure force 30 t, with feeder, see pictures

Tool holder VDI 30 longitudinal holder Interface size square 25x25 2.3025G300 right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 17.00 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-2-3025g300-laengsaufnahme-stahlh oehe-25-/28007 Condition: New

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Premus Precitool Type: Preciset 420 Measuring range X: 420 mm Measuring range Z: 420 mm Pressure: 6-8 bar Frequency: 50/60 Hz Power: 600 VA Voltage: 100-120 V~ / 200-240 V~ Weight: ~120 kg Accessories: Data clips incl. coding section zidCode Scanner All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pre ...

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

Electric tow tractor Manufacturer: MOVEXX Type: T 1000 The electric tow tractor can be used in numerous areas. Think about internal and external logistics; however, the machine can also be used to move containers in waste management. The TT1000-T can also move a variety of different types of trolleys, such as roll containers, industrial trolleys and aforementioned waste bins. Technical data pulling aid: 300W / 800 N Weight without battery: 40 kg Year of construction 2020 including battery charging station Maximum weight to pull: 1,000 kg Battery specifications: Lithium battery: LITHIUM LIFePO4 24V / 36 Ah / 922 Wh Year of Make: 2020 Weight: 11.9 kg Condition & accessories, see original pictures! If you have any questions, email or call.

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Touch Panel, Control panel, CP7822-0001-0010, Beckhoff, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.