126,739 used machines on RESALE, but how to find them? Machine Search
ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area ...
Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.
Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg
used
Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.
Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...
Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.
Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione
Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with: slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M2-7 -Recording: MK2 -Dimensions: 100/290 mm -Weight: 2 kg
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
CO2 2d laser Model MAZAK NTX48 Champion Year 1999 Hours worked 53052 Power 1500 watts Hybrid type axis movement (X axis table movement, Y and Z axis head movement) X-axis longitudinal travel 2650 mm Y-axis transverse travel 1270mm Z-axis travel 100mm Machinable dimensions 2500x1250mm Head with capacitive sensor Mazatrol L-32B CNC Control Maximum machinable thicknesses with 5-inch head now supplied --6.0mm iron -3.0mm stainless steel -2.5 mm aluminum (with 7.5 inch head Iron 12.0mm Stainless 6.0mm theoretical) External dimensions: Length 5563mm
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...
Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm
The thickness of the bread slice is 15 mm; Slicing speed: up to 70 pieces per minute; easily replaceable blade system
Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !
TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced
Fiber Showroom Machine - FIBERLASER Model Series HLF Power: 6kW Sheet size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Tsubaki conveyor belt for small parts automatic sheet metal layer measurement Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS with 6kW Will include: Warranty CAD CAM Software Libellula[CUT] Commissioning Delivery within Germany Training offered Other sizes / power levels up to 15kW are available at short notice. We are trading house and service provider in Germany for YAWEI machines for more than 15 years. All training / services / spare parts deliveries are handled by us. In our showroom, YAWEI fiber lasers and press brakes can always be tested under power.
MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...
Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg
Flame cutting pliers, electrode pliers, hose assembly -Length: 3 m Price: per piece -Quantity: 5 available -Weight: 3.5 kg/piece
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...
Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...
Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor for small parts / slag ? Enclosed beam delivery system ? 19? Touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning Trumpf Laser ? New generation CO2-Laser TruFlow 6000, energy-efficient ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with status control ? ControlLine: Height regulation and sheet edge sensing ? Lens with RFID-chip Control ? Easy shopfloor programmi ...
Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens ? Cutting head quick-change device ? NitroLine ? Positioning laser diode ? PlasmaLine ? SprintLine ? ContourLine ? ControlLine ? PierceLine ? FocusLine ? Laser power control ? Oil spray device for reliable thick plate machining ? Automatic shutdown ? Work area lighting ? Sinumerik 840D con ...
Standard configuration ? Solid machine frame with integrated laser unit ? CO2 laser TLF 2700, radio-frequency excitation, chiller ? Motors: maintenance-free 3-phase servo motors ? NitroLine High pressure cutting ? High-speed processing with SprintLine ? Programmable cutting gas pressure ? Laser cutting head with 5 lens, DIAS III ? Cutting head-quick change device ? ControlLine ? Laser power control ? Laser logbook function ? Automatic shutdown ? Work area lighting ? Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data,Teleservice, 3.5 floppy drive, RJ45/BNC network connection ? Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber exhaust system and compact dust extractor, safety cabin with Macrolon panels ? Part removal station PRS 3001 ...
Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Single cutting head strategy ? Chiller ? Automatic pallet changer in longitudinal direction ? Conveyor belt for small parts / slug ? 17 Touch screen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2 laser TruFlow 5000 with optimized standby including beam guidance ventilation with N2 ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function laser Cutting head ? Lens cutting head with 250mm focal length ? Universal quickchange device for cutting head (UTI) ? LensLine with status check ? ControlLine: automatic height contr ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...
Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection ...
Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...
Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...
The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...
Cutting machine for rolls Wabäma complet in chrome steel Horizontal cutting machine Max cutting compound: Width: 135 mm Height: 50 mm with infeed and discharge conveyor New: Teflonized knife, conveyor belt Pressure belt and conveyor belt Mass: Length: 1900 mm Inlet height: 1000 mm Depth: 700 mm Connection: 380 V Condition: very good, Repaired
Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.
Thread cutting dies, replacement thread cutting dies, thread cutting head with Strehler dies, thread cutting die, thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, Thread cutting die set, unused, original packaging -Type: 3/4 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1 kg/set
Shredder mill with blades brand: Eurotecno, model: MCV 120 653, cutting chamber: 1170x700 mm. open rotor inclined cut, hydraulic hopper opening and grill. Engine: 75 hp
Shredder mill with blades Brand: Prat, model: P-10, cutting chamber: 1000x950 mm. Open rotor, inclined cut, 5 rows of blades on the rotor. Hydraulic hopper opening. No motor and no electrical panel.
Shredder mill with blades Brand: Maquiplast. Cutting chamber: 1000x800 mm with 5 rows of blades on the rotor. Motor: 125 hp and electrical panel.
maximum number of results exceeded
please refine your search
