cutting to length used for sale

BUD-MASZ slitting and cut-to-length line was built in 2005 in Poland by P.W. BUD-MASZ MACIEJ STACHLEWSKI. This system enables precise cutting of material into both sheets and strips of equal width. Material with a maximum thickness of 2 mm is uncoiled gradually towards the workspace, inside which there are, among others, high-quality roller knives and a transverse guillotine. Cutting is performed by means of reliable components, which guarantee the highest cutting precision with optimum utilisation of the raw material. Once the cycle is complete, the sheets are taken out of the workspace by means of a lift table. In the case of slitting, the finished strips of material are wound back onto coils. The BUD-MASZ slitting line weighs 45 tonnes. The coil slitting line is fully complete and consists of the following components: 1. mechanical sheet metal decoiler 10 t 2. coil lift table 10  ...

BUD-MASZ slitting and cut-to-length line was built in 2011 in Poland by P.W. BUD-MASZ MACIEJ STACHLEWSKI. The system enables the precise cutting of material with a maximum thickness of 2.5 mm into both sheets and strips of equal width. The entire process is performed fully automatically. The material is uncoiled gradually towards the workspace, inside which there are, among others, high-quality roller knives and a transverse guillotine. The use of these components guarantees the highest cutting precision with optimum utilisation of the raw material. Once the cycle is complete, the sheets are taken out of the workspace by means of a lift table. In the case of slitting, the finished strips of material are wound back onto the coils. All this makes the offered BUD-MASZ slitting and cut-to-length line the best choice for any industrial plant. The coil slitting line is fully complete and co ...

Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion

Linear drive, linear gear, screw jack, spindle drive, linear unit, linear guide, linear axis -Manufacturer: RK Rose Krieger, linear slide -Type: 301500000460 335374/60 -Travel: 320 mm -Dimensions: see drawing with the pictures -Price: per piece -Number: 4 Stück -Dimensions: 490/95/H60 mm -Weight: 3 kg/piece

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction -with: Side stop movable via hydraulic motor in transverse direction -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop -Manufacturer: Behringer, saw stop length stop with roller conveyors -Rolls: Ø 90 x 1065 mm -Roll spacing: 310 mm -Individual components/accessories: incl. 5 spare rollers see photos -Price/Delivery: complete -Total dimensions: 15040/1800/H1230 mm -Total weight: 3300 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: Saw roller conveyor, 2 pieces / one-sided with stop rail -Roll width: 250 mm -Transport length: 2130 mm -Rollers: Ø 50 mm -Roll spacing: 300 mm -Total height of roller conveyor: 880 mm -Transport dimensions: 2130/400/H250 mm -Total weight: 73 kg

Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 6x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT • Entry guide • Feeding rolls • 7 Straightening rolls • Encoder • Shear • Variable speed of 0 to 20 mts/min OPTIONS • Film plastic device • Motorised entry guide • Hydraulic entry table • Hydraulic dauble entry table • Stackers 2, 3, 4, 6 meters. MATERIAL TO BE PROCESSED: WIDTH TO PROCESS: THICKNESS (R=450NW/MM2) PRODUCTION SPEED: CUTTING ACCURACY: COIL LOADING CAPACITY: Steel 420 Nw/mm2 Steel 700 Nw/mm2 Aluminium 200 Nw/mm2 750, 1000, 1250, 1500 mm from0`5 to 1`5 - 2`0 - 3`0 - 4`0 mm up to 20 m/min +/? 0`5 mm 4,6,10,15 to If you are interested, please send us your enquiry with the following details: - Coil weight - Coil width - Coil inner and outer diameter - type of material - Material thickness - Number of slitting lines (only for slitting and cut-to-length lines) - Material to be processed in tonne ...

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

length 300 mm, tip height approx. 30 mm, diameter 0.5 - 52 mm, serviced and calibrated on 24.07.2024 by Studenroth, equipment/accessories: software, monitor and computer, technical documentation Auction-ID: A7-45768-30

Set of 10 boxes of 200 screws diameter 4 mm length 30 mm Auction-ID: A1-45282-191

Set of 6 boxes of 200 tx 25 screws diameter 5 mm length 50 mm Auction-ID: A1-45282-192

Set of 10 easily foldable beach tents, height 62 cm, width 69 cm, length 125 cm Auction-ID: A1-45282-147

Set of 4 new wooden shelves height 87.5 cm width 26 cm length 49.5 cm Auction-ID: A1-45282-163

For sale is an extensive lot of fiber optic cables on wooden and metal drums. Details: • Cable type, among others: • Blowing MT 12 PE 192 (16x12) G.657.A1 1600N 8.4 mm (DIN VDE) • Blowing MT 12 PE 96 (8x12) G.657.A1 1800N 6.3 mm (DIN) • Micro Cable FO 12F 250μm G.657A1 HDPE 3.8 mm • Standard: G.657.A1 (suitable for FTTH / fiber optic networks) • Condition: used / in stock, optically good condition (see pictures) • Storage: outdoors • Partly printed with lettering & technical specifications Quantities & lengths: • Different drums with lengths of approx. 350 m to 7,800 m per roll • Total scope according to the list: • approx. 192 cable: ~19,427 m • approx. 96 cable: ~32,125 m • Additional micro cables / house connection cables Areas of application: • Telecommunications / fiber optic expansion (FTTH / FTTB) • Network co ...

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

Universal cutting machine with circular knife, d 250 mm

Kitchen slicer, crooked, type KSSM-V 1.4 D

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,

Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used

Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used

CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used

Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Soldering table Ceramics: 340 x 390 mm Equipped with: 2 Gasfackels Weight: 300 kg Table Lxwxh: 2000 x 900 x 1750 mm

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

Auction-ID: A1-44302-286

Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm

Flame cutting machine, torch, oxy-fuel cutting machine -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2 kg

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: ESAB, machine cutting torch -Type: PMY -3 connections: gas/oxygen/cutting oxygen -Dimensions: 490/140/100 mm -Weight: 2.5 kg