cutting to length used for sale

6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets  ...

Technical Specifications & Performance Data The Used Fossil Flour Filter Della Toffola NF 5 1996 is a pressure filtration unit designed for beverage clarification with diatomaceous earth (fossil flour). It is well suited for pre-bottling and canning stages in beverage production and industrial packaging lines, supporting high product clarity before rinsing, filling, capping, and labeling operations. Manufacturer: Della Toffola Model: NF 5 Year of construction: 1996 (maintenance performed in 2012) Filtration stages: 3-stage configuration for coarse-to-fine clarification Operating context: Suitable for isobaric process environments and prefiltration ahead of carbonated product filling Electrical supply: 400 V, 50 Hz Full load current: 15 A Safety features: integrated protections and interlocks included Documentation: manuals available Typical applications: filtration of water, juice, beer, ...

Key data: 320 mm, 110 mm, 6

MAX DIAM 320

Key data: 100 t, 355 mm, 125 mm

Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes

Townsend SK11-350 Derinding skinner Serial: 10460 Stainless, membrane skinner, with 500mm tooth roller skin membrane, 0.75Kw, mobile, 3Ph

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

Key data: 1600 mm, 460 mm, 16

TABLE DIAM 1350

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 table surface area: 3000x800 mm turning speeds: 2000 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,8x3,85x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° spindle turning speed range: 1000 U/min transmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mm Table load: 12000 kg spindle taper ISO: 50 width of T-slots: 22 mm T-slot - distance: 160 mm Feed: 1-6000 mm/min table rotating: 1,5 U.min-1 total power requirement: 80 KVA weight of the machine ca.: 36 t dimensions of the machine ca.: 7,7x7,2x4,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1250 mm z-travel: 1800 mm turning speeds: 7,1-1120 U/min table surface area: 1200x1200 mm w-axis: 800 mm Radial face slide: 600 mm radial face slide travel: 200 mm Tailstock: mm angular milling head: digital readout: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6160F : prompt, Zwischenverkauf v : China : 95 € : 1 : 75 € : 610 - 920 mm : 700 kg : 20 kg : 350 mm : 52 mm : 1 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOX pressotechnik CBM 004.025.001.a.007 Find more here - / Contact us at -

Laminating machine / Film to sheet / Sleeking Make GMP Model Q-Topic 380 - Sleek Year 2014 Min size 180 x 230 mm Max size 380 x 500 mm Details manual feeding,.automatic seperation, sleeking option (thermal metalic hotfoil application), single sided thermal lamination. Production output 10 meters per minute Available direct

GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - / Contact us at -

2010 Toyoda FV 1165 CNC vertical machining center Type: FV 1165 Manufacturer: Toyoda Year: 2010 Control: Fanuc X: 1100 mm Y: 650 mm Z: 600 mm Toolchanger: 40 positions Work table dimensions: 1300 x 650 mm Chip conveyor Machine in good condition, under power. Find more here - / Contact us at -

Machine Model and Specifications: - Model: Torrefacteur 3000 - Capacity: 50 kg per batch - Power: 5 kW - Voltage: 380V/50Hz - Dimensions: 1.5m x 1.2m x 2.0m - Weight: 800 kg Operational Features: - Automatic temperature control - Programmable roasting profiles - Built-in cooling system - Advanced safety features including emergency stop and overheat protection Find more here - / Contact us at -

faceplate diameter: 2500 mm swing diameter: 3500 mm turning height: 2000 mm faceplate speeds from - to: 100 UpM max. workpiece weight: 15 t main drive motor: 45/55 kW Control: Fanuc 18i-TB ram head dimension: 240 x 240 mm x-axis: -200 / +2950 mm z-axis: 1200 mm w-axis: 1000 mm feed range: 1 - 3000 mm/min rapid travel (x and z-axis): 1- 10000 mm/min total power requirement: - kW weight of the machine ca.: ca 70 t dimensions of the machine ca.: 10,8 x 6,95 x 7,15 m CNC vertical lathe - CNC control Fanuc 18i-TB - Face plate - 1 ram - Protective housing - Coolant system - 12-position tool changer (static tools) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

HBM WHN 13.8 B, new 1986, CNC control system Heidenhain

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck

Manufacturer: SBM Model: V10H Total Year of Manufacture: 1994 Weight : approx. 9,000 kg with 200 kW engine Type of Machine: Vertical Crusher Find more here - / Contact us at -

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 8

MACHINE CNC .

swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mm max. turning diameter: 260 mm Max. Turning length: 540 mm travel -x axis: 240 mm center height over bed: 260 mm control: FANUC 21i-TB spindle bore: 77,5 mm no. of tools in turret: 12 x tool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.