cutting table used for sale

An exhibition table from the retail trade including various goods is offered. estimated value of goods 1000€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial means, a bid is binding. Counters or other inventory are not part of the auction. Auction-ID: A7-50213-203

large batch of laptops, tablets and unused batteries, more than 500 in total. Important note on transport: The pallet is very heavy. When picking up or transporting, please take into account that the goods have a correspondingly high total weight. Auction-ID: A1-50209-1276

220x90 cm max load 1000 kgs 280x80 cm max load 1000 kgs 275x95 cm max load 500 kgs 280x115 cm max load 1000 kgs Auction-ID: A1-50215-38

For sale is a used rotatable sealing table VT H4

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Gruse, hydraulic scissor lift table trolley, scissor lift trolley, Hebefix type HF 2 C -Load capacity: 500 kg -Platform: 970 x 500 mm -Dimension when retracted: Height 360 mm -Extended dimension: Height 970 mm -Push bars: not included in the scope of delivery -Number: 2x scissor lift trucks available -Price: per piece -Transport dimensions: 1230/600/H360 mm -Weight: 100 kg/unit

Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg

Offer 26036 Technical data approx.: - Load capacity approx. 3000 kg - Face plate diameter 1520 mm - Face plate can be tilted by motor - Rotary movement electr. infinitely variable - Welding current transmission 650 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Re- + counterclockwise rotation - Handheld remote control - Footswitch - Space requirement approx. W 1700 x H 1500 x D 2300 mm - Weight approx. 2800 kg

• Incl. jaw chuck, jaw width: 200 mm • on mobile base frame

Attention: without the pallet seen in the photos

Additional technical specifications: • Hole diameter: approx. 30 mm • Distance from hole center to hole center: approx. 100 mm

• Hole diameter: approx. 30 mm

Attention: without the pallet visible in the photos.

Drehzahl: bis 3000 U/min, max. Sägeblattdurchmesser: 315 mm, Betriebsspannung: 380 V, Frequenz: 50 Hz, Anschluss: 2600 W, Nennstrom: 5,5 A, Tischabmessungen: 1100 x 660 mm

Attention: without the pallet seen in the photos

Incl. 3-jaw chuck, diameter: 120 mm.

Additional technical specifications: • Hole diameter: 30 mm • Distance from hole center to hole center: 100 mm

Auflagefläche: ca. 2330 x 1500 mm

Attention: without the pallet visible in the photos

• with three slots. Attention: without the pallet seen in the photos.

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: i-lift, hydraulic scissor lift table trolley, scissor lift trolley, lift table type QT150 -Load capacity: 150 kg -Platform: 700 x 450 mm -Dimension when retracted: Height 245 mm -Extended dimension: Height 760 mm -Quantity: 1x scissor lift truck available -Transport dimensions: 910/450/H350 mm -Weight: 41 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: i-lift, hydraulic scissor lift table trolley, scissor lift trolley type FH 3/6T -Load capacity: 300 kg -Platform: 600 x 600 mm -Dimension when retracted: Height 590 mm -Extended dimension: Height 1310 mm -Quantity: 1x scissor lift truck available -Transport dimensions: 810/600/H980 mm -Weight: 105 kg

Electrically Height adjustable with foot pedal, tiltable headrest (manual). Auction-ID: A1-47445-103

Power supply: 220V; Capacity: 5x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-60

Power supply: 220V; Capacity: 6x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-63

Power supply: 220V; Capacity: 5x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-61

Plateau diameter 450 mm; Own weight: 120 kg Auction-ID: A1-49785-68

Set of 10 Containers Manufacturer: CMA For tablets Set of 10 containers 150 liters (approx. 740 x 740 x 170 mm) Wheel centre distance: 390 x 580 mm Approx. Drain 220 x 220 mm Tare: 50-54 kg Butterfly type drain hatch Auction-ID: A1-50259-20

Development Tablet Press Manufacturer: Romaco Kilian Model: RLS 15 Year: 1985 Serial Number: 30869 700098 796 Rotary 15 stations Punches type 20/28 Tools present (details on request) Incoterm: FCA Auction-ID: A1-50259-14

Power supply: 220V; Capacity: 8x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-65

Equipped with T-slots; including cross table horizontal, vertical; 400 x 400 mm; round with diameter 450 mm; distribution table with diameter 375 mm; with flat table 930 x 170 mm; Pallet included Auction-ID: A1-49785-101

200 x 460 mm/ including magnetic table Walker 150 x 300 mm Auction-ID: A1-49785-39

Set of 10 Containers Manufacturer: CMA For tablets Containers 150 liters (approx. 740 x 740 x 170 mm) Wheel centre distance: 390 x 580 mm Approx. Drain 220 x 220 mm Tare: 50-54 kg Butterfly type drain hatch Auction-ID: A1-50259-19

Power supply: 220V; Capacity: 8x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-64

Diameter 350 mm; Sinus tilting magnetic table with clamping surface 250 x 150 mm; tilting clamping table with T-slots and graduation with dimensions 300 x 300 mm; including pallet box Auction-ID: A1-49785-121

Thanks to the Swedish quality design, this table guarantees a stable and safe vertical positioning of your goods - Brand: Marco AB (VPG), Type: M1 005090-D1, Year of construction: June 2020, Lifting capacity: 500 kg (maximum distributed load), Lifting height (Stroke): 900 mm, Platform dimensions: 1350 x 800 mm, Construction height (Lowest position): Only 180 mm, Lifting time: Approx. 20 seconds, Connection: 3x400V AC (Power current), Protection class: IP55 (dust and splash water resistant), Operation: Includes ergonomic hand control with emergency stop, Standard: Fully CE certified. (Functional) Auction-ID: A3-49400-10851

Power supply: 220V; Capacity: 6x GN 1/4; Temperature range: +2°C/+8°C; Static cooling; Stainless steel body + adjustable feet; Glass top Auction-ID: A7-50326-62

Automatic pile unloader Age 2000 Maximum sheet / layer format: 1050 x 1450 mm Maximum layer weight: 300 kg Minimum pallet height: 130 mm on stock available: immediately located: Germany

(for processing large plates) Equipment / Additional information: The plates are fixed to the table using a vacuum.

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: Hanaoka, hydraulic scissor lift table trolley, scissor lift trolley type L-150 -Load capacity: 150 kg -Platform: 710 x 450 mm -Dimension when retracted: Height 220 mm -Extended dimension: Height 720 mm -Transport dimensions: 810/450/H230 mm -Weight: 38 kg

Technical data Manufacturer: Wagner Type: 211-25/25 Design: Tabletop demagnetizer Device number: 154169 Connection voltage: 220 V Mains frequency: 50 Hz Current consumption: 5.0 A Configuration With flat metallic work surface and separate control unit with rotary control as shown. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-50403-19

Dimensions from the table: 1430x750x730mm ; Auction-ID: A1-50080-14

HYMO hydraulic lift table with a capacity of 500 kg. Dimensions of the top: 120 x 80 cm Power supply: 400 V Functional Presence of oil seepage at the outlet of the cylinder; plan for the replacement of the seal. Auction-ID: A1-49938-60

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm w-axis:800 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 ? Overhauled in 2025 and 2026 ? The spindle was relubricated and new spindle bearings fitted in 2025 by technicians from TOS Varnsdorf ? 12-month warranty and guarantee on geometric accuracy Scope of repairs to the X, Z and B axes 1. Complete dismantling and cleaning of the machine bed for the X and Z axes as well as the B axis 2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines 3. Removal of the old lining from the X- and Z-axis slides and the B-axis 4. Anchoring of re-grinded X and Z axis machine bed 5. New, hand-scraped lining made from Biplast-V on the X- and Z-axis slides, and from new Biplast-V on the B-axis 6. Installation of ball screws, lin ...

spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ

spindle diameter:130 mm x-travel:5000 mm y-travel:3000 mm z-travel:2000 mm The TOS Varnsdorf WHQ 13 CNC is a high-performance CNC-controlled horizontal table drill press fitted with a Siemens Sinumerik 840D CNC control system, designed for the precise machining of large and heavy workpieces. The machine is suitable for drilling, boring and milling complex components and is typically used in heavy machinery manufacturing, plant engineering, toolmaking, and in the energy and heavy industries. With generous travel ranges of 5,000 mm on the X-axis, 3,000 mm on the Y-axis and 2,000 mm on the Z-axis, the machine offers an extensive working area. The worktable, measuring 2,500 × 1,800 mm, can accommodate workpieces weighing up to 20 tonnes. The horizontal spindle achieves a speed of up to 3,000 rpm. In combination with the supplied milling head, even demanding milling operations and various ma ...

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply