cutting table used for sale

Including various clamping material

Diameter500 mm

S.No.: 033001 Format: max. 450x310mm; at least 185x128mm; Stack height: max. 320mm Equipment / additional information: Stacking options: smooth or offset to the side - compatible with: Horizon MC-80a Horizon VAC-100a Horizon VAC-60Ha Horizon VAC-1000 Horizon VAC-600

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Heavy machine table / clamping table with T-slots and lifting eyes, suitable for clamping workpieces on milling machine or machining center. Size: 800x800x600mm.

Stored in working condition, buyer must provide transport himself. Elevator available.

Equipped with 160mm three-jaw chuck

Height-adjustable side table and trolley without contents in the set

Table with polishing and grinding machine and rag

Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes

2 pieces., with castors, height adjustable

Incl worktop and profile supports for aluminum window and door profiles

NC – controlled precision rotary table surface grinding machine with horizontal grinding spindle and transverse slider - brand new Rotary table diameter 1,000 mm Largest grindable diameter 1,150 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 800 kg Circumferential grinding wheel Ø 450/203 mm x W 80 mm Highest workpiece height with new grinding spindle 700 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 14.7 kW Rotary table drive power 5 kW Torque 30 Nm Weight approx. 15,000 kg

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Swivel rotary table Ø 1000 mm Shelf diameter: Ø 1000 mm x height 650 mm Rotation at 360° Vertical swivel Weight: approx 650 kg

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 500 mm height: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 piece packing table Table dimensions: approx. 1,610 x 850 mm Table height: approx. 870 mm height-adjustable storage level: approx. 1,520 x 400 mm Storage level with plug-in compartment dividers (4x small, 3x large) total height: approx. 1,970 mm Condition: used fully functional slight sticker residues and signs of wear may be present In total, there are almost 20 pieces for sale. A visit can be made by appointment. Conditions: Self-collection by telephone arrangement from location 53783 Eitorf. Price: EUR 349,- (gross) per piece Invoice with selected. VAT.

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 130 mm, 3000 mm, 2000 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

Affeldt roller conveyor tables 1000-531-237 mobile, two-part RA1292 The staging roller conveyors have two parallel roller conveyors and have a mobile base frame. This makes them flexible to use. They are in good condition (used). Technical data: Manufacturer: Affeldt Type: Roller conveyor 1000-531 Year of manufacture: unknown Condition: good (used) Conveyor length (FL): 1000 mm nominal/outer width (NB): 531 mm Conveyor width total: 531 mm Conveyor width single: 2 x 237 mm roller pitch: 34 mm Height OK roller: 850 mm adjustable +/- 50 mm Scope of delivery: with base frame and swivel castors Availability: 7 pieces Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. W ...

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 07 pcs. Note: The advantage at a packaging table or at a Picking rack is that has all the tools needed & accessory materials used to create the product are always at hand. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 07x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly  ...

number: 65 Positionen : 28 mm condition: neu weight: 49 kg Basic-Set 3 65 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 37 Positionen : 28 mm condition: neu weight: 35 kg Basic set 2 49 pieces, 28mm system, consisting of: Forceps: 8 x 280604 Bolt: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Ref. -No.: 10354 Manufacturer: UNION Year of construction: 1998 Retrofit: 2000 Type of control: Digitale Steuerung 2D Control: HAIDENHAIN TNC 135 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1250 mm Z-Travel: 1475 mm Spindle stroke: 710 mm Table Dimensions (Lengthxwidth): 1250x1400 mm Spindle Speed: 1600 RPM Drive Capacity - Spindle Motor: 30 kW Total Power Requirement: 35 kW

Ref. -No.: 10353 Manufacturer: UNION Year of construction: 1986 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1000 mm Z-Travel: 1200 mm W-Axis: 710 mm Spindle Taper: SK 40 Table Load: 2500 kg Max. Size Of Workpiece Lxwxh: Höhe 1400 mm Spindle Speed: 1600 RPM Rapid Traverse: 3,15 m / min Total Power Requirement: 23 kW Weight Of The Machine Ca.: 10,3 t

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile

• With precision balance Sartorius BP 61S • Measuring capacity >5 tbl./min. (BP 61S) • Tablet Ø max. 20 mm • Tablet height 1-12.5 mm • Max. tablet weight Tablet weight 30 g • Weighing range 61 g (BP 61S) • Readability 0.0001 g (BP 61S) • Interface RS 232 (RS 485 via external converter) for transmission of measured data to the control unit of a Kilian tablet press • Compatible with Kilian monitors CW 100/200 and the controllers C 50/52 IPC and VICON • Connection 220V/50Hz

Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Brand: GME Bavelloni Type: Glassdrill + table Model: VT1250 Chassis number: 10.02.007 Construction year: 1995 Length mm: 2200 Width mm: 1000 Height mm: 1900 Transport size L x W x H: 2,5 x 2,2 x 1,9 Condition machine : Overhauled Photos/film available: Photos available Remaining: Equipped with laser Remaining: Stretch works on air Remaining: Double-sided drill, bottom and top

max. paper size: 90 x 90 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 105 x 145 cm : 16 cm serial no.: 474 voltage: 380 V connected load: 1,8 / 4,8 kVA with press roll The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 30x21 cm serial no.: 1888 voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used cooling table, dimensions: 2m x 1m

Chassis number: 35430 Weight: 1 tons Length mm: 3950 Width mm: 3600 Height mm: 950 Transport size L x W x H: 2,3 x 3,6 x 1,75 Condition machine : Very good Photos/film available: Photos and video available Remaining: Controller in engine For more information, please mail us: salestecfort.nl

Remaining: With fold-out parts Weight: 0,025 tons Length mm: 1900 Width mm: 500 Height mm: 1000 Working height: 100 cm Transport size L x W x H: 1,3 x 0,5 x 1,0 Min.-max glass size: 160 x 50 Condition machine : mediocre Missing parts: Wheel - For more information, please mail us: salestecfort.nl

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

Stainless Steel Work Table AT 3500 with beech wood and gallery at the back 2 x Stainless Steel Sliding Door with Shelf Drawer block on the left shortened Door with shelf shortened Dimensions: 3500 x 800/700 x 900 mm WxDxH Occasion

Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion

ID2950 Supra Schaltische/scarf tables 67 Avermann tables Wachenroth (Supra) 2.40 m formwork width 2.70 m total width 10.50m length 5 cm upstand 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons) 67 Avermann Tables Wachenroth (Supra) 2.40 m formwork width 2.70 m overall width 10.50 m length 5 cm backsplash 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons.)

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

approx. 5 pieces ball roller tables, 2,88m x 0,57m - used - : Price from location: 850.-€ (net), dismantled, packed and loaded! Price for the purchase of all 5 tables: 3.750.-€ (net) dismantled, packed and loaded! Supplier: TGW Manufacturer Castors: ALWAYSE Type: unknown Year of construction: unknown, Length: approx. 2.88m Width: approx. 57cm Height with feet approx. 79cm Condition: good Available: immediately Location: Biebergemünd

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.