cutting steel used for sale

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

Steel fabricated welding bench with vice, 1500mm x 1000mm Auction-ID: A1-45187-230

In stock on pallet Auction-ID: A1-45003-148

Steel fabricated measuring table with Mitutoyo DLO and trolley. ANR 307. Auction-ID: A1-45187-127

In stock on pallet Auction-ID: A1-45003-144

Various steel sheets and wooden wagons with wheels Length 1350 - 1700 mm x width 400 - 860 mm x height 1040 - 1720 mm Price: EUR/piece 28,- net + VAT approx. 10 transport aids 1110 x 600 mm Price: EUR/piece 15,- net + VAT

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg

Steel pipes, flushing pipes -Diameter: 1010 mm -Wall thickness: 10 mm -Length 4,800 mm -Weight: 253.5 kg/m

Steel pipe, flush pipe -Diameter: 1020mm -Wall thickness: 14 mm -Length: 5,400 mm with arch -Weight: 352 kg/m

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Support length: 80 mm -Clamping height: up to approx. 15 mm -Dimensions: 80/33/H90 mm -Weight: 0.6 kg

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

Steel pipes, flushing pipes -Diameter: 1070 mm -Wall thickness: 15 mm -Length: 4,350 mm -Weight: 403.2 kg / m

Steel pipes, flushing pipes -Diameter: 810 mm -Wall thickness: 25 mm -Length: 4,800 mm -Weight: 508.7 kg/m² -Total weight: 2441 kg

Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg

Steel holder, clamping plate with T-slot -Holder: 36 - 39 x 18 x 75 mm -Dimensions: 145/135/H170 mm -Weight: 4 kg

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -Steel rope with: loops -Length: 4 m -Rope diameter: 12 mm -Price: per piece -Number: 1 pieces -Weight: 2.15 kg/piece

Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Dimensions: 75/40/H60 mm -Weight: 0.7 kg/piece

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick change tool post, tool post head, quick change tool post - Shooting dimensions: 90 mm -4x different versions: of steel holders available (pictures on request) -Price per piece -Length: 120mm

Quick change tool holder, tool holder head, quick change tool holder -Mounting dimensions prism: 72 mm by 90 mm -Number: 2x steel holder available -Price: per piece -Dimensions: 145/60 / H125 mm -Weight: 3.9 kg/piece

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 830 mm -Total length: 850 mm -Admission: M8 -Number: 10 rolls available -Price: per piece -Weight: 2.7 kg/piece

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick change tool holder, tool holder head, quick change tool holder -Support half-round: 22 mm -Assembly for: Grooving/slot steel -Drawing with the photos -Number: 2x holders available -Price: for both -Weight: 3.3 kg/piece

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 Rhymes steel external silos Ø 2,800 mm Content 51m³ = 30 tons of flour per silo Height per silo 12,500 mm Silos stand on frame for sale Price on request Phone +49 172 8345457

Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm -Weight: 1.1 kg

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inside: Ø 60.3 mm -From: 59.5 to: 61.0 mm -Pressure: 16 bar -Price: per piece -Number: 10x available -Dimensions: 85/95/H78 mm -Weight: 0.6 kg/piece

Stainless steel couplings, pipe coupling -Type: FLEX 1L -Inside: Ø 60.3 mm -From: 59.0 to: 61.5 mm -Pressure: 25 bar -Dimensions: 82/92/H75 mm -Weight: 0.6 kg

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 560 mm -Dimensions: 625/855/H210 mm -Weight: 6.3 kg

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm