cutting steel used for sale

Dimensions (L/W/H): 2120x1585x1025 mm Weight: 560 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

Dimensions (L/W/H): 3200x1960x1470 mm Weight: 1000 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

Dimensions (L/W/H): 800x560x445 mm Weight: 40 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

laser capacity in Watt: 130 / 150 Peak working area: 1300x900 mm Dimensions (L/W/H): 2200x1350x1150 mm Weight: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1328x1070x530 mm weight: 220 kg total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 0 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 960x900x1460 mm Weight: 200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel: X-axis (mm) 3060 Y-axis (mm) 1530 Z-axis (mm) 160 Max. dimensions sheet metal (mm) 3048×1524 Control: Sinumerik 840D SL Power of laser: 2000W Max. sheet thickness: steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm with loading and unloading system for the sheet metal

Dimensions (L/W/H): 312x410x739 mm Weight: 90 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)

cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany

Treif Discus Circular Knife Machine Type: Discus 400 digital control Circular knife Cutting width adjustable from 4mm to 18mm 400V 50Hz Stainless steel cladding Weight approx. 200 kg Operating voltage 400 volts Control voltage 24V/DC V AC Nominal power 0.9 kW Circular knife with Teflon coating Height: 110cm Width: 80cm Depth: 70cm

Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2900x1800x1100 mm Total power requirement: 0 kW Weight: 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3700x2400x1470 mm Weight: 1500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Dimensions (L/W/H): 1106x883x543 mm Weight: 195 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 1500 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4000 mm, 12000 mm, 12000 W

4000 x 2000mm 12000w

turning diameter over bed: 460 mm turning length: 1250 mm centre height: 230 mm centre distance: 1250 mm spindle turning speed range: 35 - 1800 U/min weight of the machine ca.: 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting

Key data: 3000 mm

Used machine in good condition. Available for immediate delivery. - Laser type: CO2 - Working area (X x Y x Z): 3,000 x 1,500 x 115 mm - Max. working weight: 900 kg - Positioning speed X / Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser power: 6 kW - Thickness of the iron max: 25 mm - Thickness of stainless steel max: 25 mm - Thickness of the aluminium max: 15 mm - TRUMPF Liftmaster loading and unloading unit (Liftmaster currently not installed)

turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 2100 mm centre height: 250 mm : mm spindle bore: 60 mm spindle turning speed range: 11 - 2000 U/min total power requirement: 7,0 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.

table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Hackmesserwelle division 28 for 10 mm cube - without knife, Complete list on request