cutting mill used for sale

Large mixed lot of metalworking cutting tools/toolholders, predominantly square-shank indexable holders for CNC/conventional lathes. Includes turning, grooving, parting and profiling holders plus a number of tools/components in original or replacement plastic/cardboard cases. Several holders retain carbide inserts and clamping hardware. Mix includes both apparently unused/boxed items and used tooling. Visible brands include Kennametal, Horn, Hertel, Seco, Tungaloy, Sandvik Coromant, Walter, Widax, Safety and GPK/SPK Auction-ID: A7-50717-227

x-axis: 600 mm y-axis: 400 mm z-axis: 350 mm U-axis: 150 mm V-axis: 150 mm inclination: +/- 25 ° wire dia.: 0,10-0,30 mm wire clamping: 3 - 23 N Control: SPW NC-Steuerung workpiece weight: 1000 kg tank: 1050 x 710 mm total power requirement: 13 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,575 x 2,89 x 2,25 m ALC600G SPW wire EDM machine - SPW NC control, generator and control system - iGroove+ - 3D SetUp - L-Cut (wire shredder) - Dielectric tank 1000 l, 870 x 2605 mm -- 4 replaceable paper filters -- De-ioniser – ion exchange resin (18 l) Workpiece: Steel, 100-130 mm thick Number of cuts: 3 Wire: Brass, Ø 0.25 mm Accuracy: ± 1.5 µm Wire consumption: 35 per cent less during fine cutting Operating hours (cutting time): 3,066 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting width: 920 mm • Max. cutting length: 920 mm • Max. pile height: 120 mm • Min. cut: 25 mm (without false clamp plate) / 90 mm (with false clamp plate) • Max. clamp pressure: 30,000 N • Max. cutting speed: 42 cuts/min • Front table length: 632 mm • Main motor: 3 kW • Power supply: 380 V, 3-phase • Drive: hydraulic

Auction-ID: A3-46133-9276

2 rotary tables Dimensions of the rotary tables: 2520x3550 mm Auction-ID: A1-50758-2

Technical data Manufacturer: SCHNEIDER MASCHINENBAU AG Designation: Face Cutter / Face Cutter 5 Year of Make: 1987 Working width: 1,800 mm Face Cutter Type: 3551 Machine Number: 515-1098 Power: 2.8 kW Voltage: 380 V / 50 Hz Table load: 300 kg Weight: 1,900 kg Configuration Automatic stacking: Type 3551, No. 515-1098 Automatic stacking: Type 3543, No. 514-1098, table load 300 kg, weight 2,000 kg Remarks Face cutting machine with automatic stacking and destacking. Auction-ID: A1-50608-1

Permissible width: 1500 mm approx Auction-ID: A1-50758-19

ESER E 925 Veneer Cutting Press Heavy-duty swing-arm cutting press for die-cutting veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Year: 2017 Serial number: KKP 03 Power: 1.5 kW Electrical supply: 220–380 V Configuration: Manually adjustable upper cutting head, cutting table and separate electrical control cabinet Control cabinet: Marian Galád, type KKP 01, 2018, 400/230 V, 16 A, 50 Hz, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-32

Auction-ID: A3-46134-5660

Machine equipped with a \"motor\" drum of Ø 2.35 m and 10 independent tensioning wheels, each with a Ø of 2.0 m. The space between the tensioning handwheels is easily adjustable, which allows the thickness of the slices to be sawn to be adapted according to the customer's needs. A guide drum is also installed on the \"tensioning\" side. Working hour: 22137h Auction-ID: A1-50758-7

ESER E 925 Veneer Cutting Press Used swing-arm veneer cutting and punching press for processing veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Configuration: Swing-arm cutting head, cutting table and separate electrical control cabinet Electrical cabinet: Marian Galád, type KKP 02, production no. 2062018, 2018 Electrical specifications: 400/230 V, three-phase, 50 Hz, 16 A, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Approximate weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-33

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

dist. between centers: 6.000 mm greates pass round over bed: 1.200 mm swing diameter over slide transversal: 1.000 mm rapid traverse feeds: X/Z 10.000 mm/min guideways: 4 St. cross travel: 530 mm centre height: 600 mm control: FAGOR 8055 TC : main spindle speeds:: 20-1.600 U/min main drive motor: 42 kW spindle passage: 150 mm transmission ratio: 2 Turret: DUPLOMATIC Revolver station: 8 tools dimension: VDI-50 tail stock: tailstock quill diameter: 180 mm total power requirement: 61 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11.210 x 3.700 mm Equipment C-axis + live tooling Ø 800 mm 4-jaw independent chuck 3-point steady rest, Ø 50 -500 mm 3-point steady rest, Ø 50 - 520 mm 3-point steady rest, Ø 480- 930 mm MORARI hydraulic self-centering steady rest, capacity 50 - 315 mm MORARI hydraulic self-centering steady rest, capacity 280 - 540 mm Motorized tailstock V- ...

control: FAGOR 8055 TC workpiece weight: 10.000 kg handwheel: inkl. Chip coveyor: inkl. centre height: 500 mm greates pass round over bed: 1300 mm Swing diameter face slide: 1000 mm centre distance: 5000 mm travel of cross-slide: 680 mm rapid traverse x + z axis: 8 m/min bed width: 900 mm spindle nose: DIN 55026-11 number of spindle speeds: 0-800 U/min/rpm spindle bore: 104 mm spindle diameter in front bearing: 180 mm turning speed range:: Anzahl 4 main drive: 37 kW Torque: 10.000 Nm : Sauter 300 x 300 diameter of quill: 180 mm quill stroke: 300 mm Height: BIS ZUR FLACHFÜHRUNG 805 mm total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m Equipment -4-jaw faceplate (independent jaws) Ø 800 mm -3-jaw faceplate (independent jaws) Ø 400 mm -Steady rest (4-point support) Ø 750 mm -Chuck guard -Full rear enclosure The data for this ad was ...

Offer 26294 Technical data: - Center width 3000 mm - Largest rotation – Ø over bed 630 mm - via face slide 340 mm - in the bed offset 880 mm - Spindle bore 73.5 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 200 mm - Spindle speeds 10 - 1000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Diametrical Pitsch thread - Drive 400 V / 9 kW - Chip tray with coolant device - 3+4 jaw chuck with jaws, quick-change steel holder, etc. - Bezel - Space requirement approx. W 5500 x H 1600 x D 1800 mm - Weight approx. 3600 kg

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

Good condition Auction-ID: A1-50540-58

Good condition Auction-ID: A1-50540-59

Unaudited Auction-ID: A1-50540-219

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Very good condition (probably unused) Auction-ID: A1-50540-78

Party incl bins Auction-ID: A1-50076-319

Auction-ID: A1-50076-310

64 pieces Auction-ID: A1-50076-277

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

- Fast comminution with rotational speeds up to 400 rpm - Loss-free grinding even below 1 μm - Uniform fine comminution of large sample amounts - Safe tensioning of the bowls with Safe-Lock-System - Useful capacity up to 4 x 225 ml Currency; MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Various diameters, maximum 400 mm; approximately 26 pieces; including pallet box Auction-ID: A1-49785-99