cutting machine ideal used for sale

Tobacco cutting machine -Sold/handed over: in its current condition as seen -Prototype: Machine is not operational -Manufacturer: Sagemüller, tobacco cutting machine with knife sharpening device -Cutting blades: 8 pcs. length 400 mm, 2 pcs. die 850/120/H275 mm -Individual components: see photos -Machine dimensions: 1900/1340/H1810 mm Total weight: 1935 kg

Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 500/710/H340 mm -Weight: 23 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 580/280/H370 mm -Weight: 7.8 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 550/280/H300 mm -Weight: 8.4 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 220/240 V -Dimensions: 360/330/H280 mm -Weight: 6.7 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Rail for oxyfuel cutting system, torch, oxyfuel cutting system, machine cutting torch, oxyfuel cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Machine cutting torch rail: Messer Griesheim – Quicky -Dimensions: 11x 1060/105/H8 mm / 2x 2060/105/H8 mm -Lengths: 11 x 1060 mm / 2 x 2060 mm -Price: 45 euros per meter -Transport dimensions: 2060/105/H95 mm Total weight: 28 kg

Polar 92 ED, Year 2001 Display Program Airtable Table left Table right Etc. Available: at short term

Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.

A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible.

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

The following services or repairs were performed:, - New color display, - Hydraulic oil change: 02 / 2026, - Gear oil change: 02 / 2026, Year of manufacture: 1996, Working width: 920 mm, Stack height: approx. 120 mm, Air table: Yes, Safety light barriers: Yes, Blades total: 2, Documentation: Yes, copy of the operating manual, Blade change device: Yes, Construction year: 1996, working width: 920 mm, Air table: Yes, Photoelectric sensors: Yes

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 23200 € : 445.44 € : 1000x2000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : unter 1/10 mm : 300 l : 400 kg/m² : 2560 mm : 1460 mm : 1500 mm : 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 1 ...

The MAXPRO200® plasma cutting system achieves impressive cutting speeds, consistent cutting quality and an exceptional service life of the wear parts in air or oxygen plasma gas. The optimal cutting parameters are automatically set and controlled in one step to simplify operation even more. Designed for mechanized and manual cutting and gouging at high loads and stresses, the MAXPRO200 delivers reliable performance across a wide range of industrial applications. The package offered here consists of: 1. SWIFT-CUT CNC FLAME CUTTING TABLE 1-a. Control Console 1-b. Software 1-c. Cutting table with gantry guide 2. HYPERTHERM MACHINE BURNER 2-a. Hypertherm MaxPro200 2-b. MaxPro200 Wear Parts Kit 3. MACHINE OPTIONS 3-a. Swift-Mark Marking System 3-b. Original Equipment Kit 3-c. LAN port

Laser Cutting Machine Manufacturer: Messer Type: Multilas 6020 Year of Make: 2001 CNC Control: Omnicom 160iL Working area: 2,000 x 6,000 mm Laser: Fanuc C4000 Laser power: 4000 W Connected load: 137 A

2 side tables 3 knives Photo cells Program

Type: Industrial Flatbed Cutting Table Model: FC4 240 Brand: TESEO Category: Cutting of soft materials (textile, leather, foam) Disassembly and loading to be carried out by the buyer Auction-ID: A1-45422-2

Brand: ZÜND Manufacturer: Zünd Systemtechnik AG (Switzerland) Model: XL-1600 + CVE16 Conveyor Type: CV-N25 Part Number: 3913077 Type of equipment Machine: Industrial Flatbed Digital Cutting Table Configuration: Table with continuous conveyor (belt) Usage: Automated multi-material cutting Condition & operation General condition: Good used condition Functional machine Zünd software installed Complete machine with control and peripherals Disassembly and loading to be carried out by the buyer Auction-ID: A1-45422-1

TRUMPF TruLaser 3530 Work Area X: 3000 mm | Y: 1500 mm | Z: 114 mm Max X Displacement: 3104 mm | Y: 1580 mm Max thickness: 20 mm Laser TruFlow 3200: 3200 W TruFlow 4000: 4000 W Performance Max acceleration: 15 m/s² Positioning speed: 120 m/min Simultaneous speed: 170 m/min Positioning accuracy: ±0.1 mm Dimensions & Weight Approx. 9300 × 4600 × 2000 mm Weight: 11,500 kg Order TRUMPF CNC (SIEMENS SINUMERIK 840D base) Electric 73–88 kVA Fuses: 125–160 A Compressed air: 31–42 Nm³/h Table size: 3000x1600 mm Auction-ID: A1-44765-1202

Air table 2 side tables 2 knives Photo cells Program

Net weight= 781 kg,

Net weight= 237 kg,

Net weight= 635 kg,

Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,

A SAF oxy-fuel cutting system in a single-torch configuration without plasma is available, number of torches: 6, tool holder stroke: 150mm, rapid traverse: 15m/min, cutting speed: 4m/min, max. cutting thickness: 200mm, max. plate dimensions X/Y: approx. 2800mm/6000mm, on-site inspection is possible.

Polar 58 EM, Year 1994 Program Safety Beams Table Table left Table right Etc. Available: at short term

Polar 78 XT year 2006 with jogger Knorr

Polar 92 ED year 1997 in very good condition Colour monitor light barrier side tables air table

Schneider Seantor 115 MC year 1982 overhault in 2003 with new control board air table side tables light barrier in very goog condition

Polar 92 E Year of Make: 1996 E version, color monitor, Air table, 2x side tables, Spare blade Very good condition!

The set also comes with the PP70 & the Auction-ID: A1-40104-125

1.50x3.00m cutting table, equipped with mobile water chiller (130x80x110cm, control box with working software (120x90x165) 650W laser. Auction-ID: A1-41992-10

Rotary die-cutting machine Maximum sheet size: 915 × 640 mm Minimum sheet size: 250 × 420 mm Maximum die-cutting format: 915 × 626 mm Die-cutting start: 14 mm - TouchScreen control Siemens S7/1500 with Siemens servo motor - Anti-static device Kersten” DC102 F-K in feeder and delivery - Electronic side lay control - Foil delivery with fan control - Variable sheet brake - Low-pile delivery

a threading machine > - Manufacturer: Rothenberger > - Model: Supertronic 4 SE > - Age: approx. 1 year > - Condition: Very good, technically perfect, little used > - Accessories: 2 threading heads included > - Invoice: available

with cutting motor: 1.5 kW, 3-phase, 1 M (inverter controlled) Pitch setting (L): Max. 1200mm, including: metal trolley: 1050 x 500 x 880 mm (L/W/H), including: rolling stand with contents, dimensions: 1840 x 1630 x 900 mm (L/W/H) Hall 1 Auction-ID: A1-45762-1

A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm

Polar 78 XS, Year 2011 Display Program Airtable Table left Table right Etc. Available: at short term

A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

Machine type: CNC fiber laser cutting machine Manufacturer: ADLINE Model: FC1530 Year of manufacture: 2020 Working area (X x Y): approx. 3000 x 1500 mm Laser type: Fiber laser Laser power: 15 kW Positioning system: CNC-controlled X/Y/Z axes Control: PC-based CNC control with cutting software Cutting gases: Nitrogen, oxygen Compressed air connection: 6 bar Table type: Flat cutting table (open type) Cooling: Industrial chiller included (CWFL-1500AN) Electrical cabinet cooling: Air conditioner EA-300A-01 (300 W) Power supply: AC 380 V ±10%, 3 phase, 50 Hz Input current: 25 A Fuse protection: 25 A Chiller details: - Model: CWFL-1500AN - Supply: 220 V / 50 Hz - Current: 4.1 – 14.3 A - Refrigerant: R410A - Max. pump head: 31 m - Weight: 72 kg Electrical cabinet air conditioner: - Model: EA-300A-01 - Cooling capacity: 300 W - Refrigerant: R ...

Machine – Orbitalum RA 41 Plus - Branded device: Orbitalum - Model: RA 41 Plus – Pipe cutting and beveling machine - Saw blade is with chamfer (see picture), no information about the saw blade for condition or wear - Year of construction: 2007 - Condition: used, with usual signs of wear - Function: fully functional (see video) - Documentation: available - with original box and gear oil from the manufacturer - Accessories: Quick mounting plate, transmission oil and pads complete - Application: Industrial / pipeline construction / precise cutting & chamfering Auction-ID: 04K-HSQ-1

This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details.

This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a processing area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a mains supply of 400 V and has a total connected load of 88 kVA. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we have for sale. Contact us for further details.

This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine.

CO₂ laser cutting machine manufactured in 2016. This HARTWEG industrial Bodor CL-1610XUF features a working area of 1600 × 1000 mm and a laser power of approximately 150 W. It offers impressive engraving speeds of up to 60,000 mm/min and cutting speeds of up to 40,000 mm/min. If you are looking to get high-quality laser engraving and cutting capabilities, consider the HARTWEG industrial Bodor CL-1610XUF machine we have for sale. Contact us for further details.

This 3-axis Bystronic BySprint Fiber 4020 was manufactured in 2017. It features a cutting area of 4,064 mm by 2,032 mm and a maximum cutting thickness of 70 mm. The machine is equipped with a powerful 6,000 W fiber laser, capable of handling various materials. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 machine we have for sale. Contact us for further details.