cutting line used for sale

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

For the purpose of pillow filling; mounted on profile steel mobile base;

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12

Condition: used and unchecked.

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Unused

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

incl. extra hose packages.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Compressed air connection 6 bar

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition

Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023

Compressed air connection 6 bar

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Please note! Needs to be checked

Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Grinder mill with blades. Brand: Mateu I Solé, model: B-25, cutting chamber: 680x380 mm, motor: 15 Kw (20 hp). Stepped rotor with water cooling. No electrical panel.

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

For the purpose of pillow filling; mounted on profile steel mobile base;

Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Model TS 38 plus Circular Knife Machine Tabletop machine Stainless steel version, Knives newly sharpened and coated Manual operation Disc thickness adjustable from 3 - 20 mm Dimensions: 950 x 660 x 500 mm, WxDxH Bread dimensions max: 370 x 200 x 160 mm L x D x H DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned with 6 months warranty More bakery machines in stock!

Inv. Num. : 5464 Type: 1250x1.2 Producer: China Created: 2014 Parameters: Maximum sheet thickness when cutting: 1.2 mm Maximum length of sheet plate: 1250 mm Equipment: 7-cylinder sheet metal straightening machine 2 knives for longitudinal cutting Unwinding and rewinding of sheet metal

- Program - Chromed air table - Air side table left / right - KNORR RLE-3-K jogger - Spare knife

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg