cuttin used for sale

Tapping machine on mobile worktop further inventory and prices at: inventar-verkauf.de/id/alesco The used threading machine, ideal for any workshop, combines high performance and ease of use. The mobile worktop makes it easy to move and can be used anywhere. Technical data: Possible thread size: M3 to M16 Spindle speed: 300 rpm Incl. 5-6 safety slip clutches Not only is it sturdy and durable, but it's also extremely versatile. It's perfect for a variety of applications and materials, from steel and stainless steel to aluminum and plastic. The device is used, but still in very good condition and fully functional. With solid construction and high reliability, this tapping machine is an excellent value and a smart investment for any workshop.

Inv. Num. : 9090 Type: Trumatic L3030 Producer: Trumpf Created: 2001 Parameters: Maximum power: 3 kW Switch-on hours: 49953 h Laser ON: 48307 Beam ON: 20858 s Work table length: 3000 mm Work table width: 1500 mm Source: TLF 3000 Turbo

Side Tables, Light Barriers, Programmable, Standard Accessories

The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...

Tyrolit FSG513P concrete and asphalt cutting device, - Year of manufacture 2014, - Drive: petrol engine (Honda, 1-cylinder), - incl. asphalt cutting disc FSA 450x3.6x25.4 Like new (only 40 m cut), power, - Power output: approx. 8.0–8.2 kW (≈ 10.9–11 HP), - RPM of saw blade: approx. 2600 U/min, Cutting data, - Max. cutting depth: 170 mm, - Max. Sägeblattdurchmesser: 450 mm, - Capture drilling: 25,4 mm, Tank & supply, - Fuel: Gasoline (unleaded), - Tank content: 6.1 Liter, - Water tank (cooling): 25 liters, Dimensions & Weight, - Dimensions (L × W × H): 1136 × 578 × 1016 mm, - Operating weight: approx. 145 kg, - Weight (unladen): approx. 113 kg, Noise & Vibration, - Sound power: approx. 106 dB(A), - Vibration: < 2.5 m/s, OPTIONAL:, 1x like-new Tyrolit FSC diamond saw blade 450x3.6x25.4 - concrete saw blade for €300, excluding VAT.

Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.

- Display - Program - Luftitsch - Formica air side tables - Spare blades

Polar 115 X Year 2008 Counter: 830,000 Features: 115 cm cutting width Central air table Sidetable Polar LW 1000 Lift 2 Spare knifes Documentation, tools

- Programm - air table - side table left and right - spare knife

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Total cut counter reading: about 227,500, - ED Program Control, - Color monitor, - Light barrier, - Chrome-plated air table, - Chromed side tables, - Back panel cover, - Cutting length: 92 cm, - Insertion depth: 92 cm, - Insertion height: 12 cm, Year of manufacture: 2001, cutting length: 92 cm, Cutting width: 92 cm, Insertion height: 12 cm, Clamp opening: 12 cm, Construction year: 2001

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16518

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Cutting width of up to 5000mm - used for cutting carpets - Width is adjustable (computer controlled) - Everything seen and tested in working condition - also remains until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16515

Compressed air connection 6 bar Auction-ID: A7-46303-29

In full working condition - Working width 2000mm - cutting width adjustable - Hydraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that tests can be carried out before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16517

Working width 4000mm - Cutting widths adjustable - For questions about the machine send your email to info@troostwijkvavato.com Auction-ID: A3-43519-16519

Compressed air connection 6 bar Auction-ID: A7-46303-30

Working width 5000mm - Adjustable width cutting blades (computer controlled) - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16516

Connection: 230V Auction-ID: A1-46037-2938

equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2

Cut length: 550 mm, Cutting height: 95 mm, 92 mm with press bar cover, Residual cut: 32 mm, 60 mm with press bar cover, Insertion depth: 570 mm, Compression: automatic compression, Press load: 200 – 1100 daN, Blade drive: hydraulic, Control: 7 inch touchpad, Connection values: 230 V / 50 Hz / 1.5 kW

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Fully functional. Free loading, please call if you have any questions

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-45902-335

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-45902-334

\" Bundle of used cutting tools and accessories from the workshop inventory. The item includes, among other things: • Various end mills (e.g. coated/uncoated, different diameters) • Disc milling cutters / angle milling cutters (multi-edged) • Tool holders and adapters • DIN 2187 extension sleeves, including MK 3 to MK 2 (original packaging partially available) • Other milling cutters and accessories Weight • Net weight: 13 kg \" Auction-ID: A7-46417-187

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC50 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 230 volts Adjustable amperage: 20-40 amps Start: "scratch-start" duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Including: plasma torch, accessories and protective cover Condition: Unused and in the original packaging

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)