cutters and vacuum used for sale

4x 1028991 SKF 8x 1204K/C3 SKF 6x 2205K SKF 24x 2300 SKF 6x 3311N SKF 2x ASNA612V SKF 4x CR70X95X10HMS4V SKF 1x FYKC35NTR/VE495 SKF 1x KRVE72PPA SKF 1x N313MB SKF 1x NU220ECMA/C3 SKF 2x OS43860 SKF 27x ZW12X17 SKF 5x 21311-E1-K-TVPB-C3 FAG 16x 546114A FAG 4x 803138.H83 FAG 1x DH506 FAG 1x NJ226E. M1. F1795124 FAG 8x RNAO50X62X20ASR1 FAG 2x 121 INA 11x F-23615 INA 28x F-45948 INA 1x GG. CJ03 INA 29x IR45X52X23-IS1 INA 1x RNA6903-H-XL INA 1x RNA6903 INA 2x N310 NTN 2x NU406C3 NTN 1x PF208 NTN 5x RNA-NA6908R NTN 5x T211D1 NTN 5x 7218H G1 U J74 SNR 1x 1318 NSK 2x L44649R/610RNES4C NSK 2x 21308K C3 RHP 1x 7019X3 TA UM EP7 RHP 36x ACS0506-2FY Koyo 1x RNA4822 Koyo 49x SBPFL201 Koyo 1x 22208KCJW33 Torrington 2x NJ2204ET Torrington 1x NK70/35ASR1 Torrington 5x NUTR45 Torrington 8x 306806C.2Z NKE 4x NKIS20 NKE and more

Lot of inserts consisting of a mixed stock of different inserts in original packaging. Included are different manufacturers, geometries and ISO grades. Partly unopened, partly opened packaging. The item is handed over in its entirety as shown. Content (excerpt from visible brands/types): Sandvik Coromant – numerous ISO plates (PMKNSH), various geometries and grades (e.g. 1044, 12055164, 880-05 06 05H-C-LM, etc.) Walter – ISO plates, including WXP45 and other grades Wohlhaupter – inserts for fine boring tools (XOMT12T308, WHC102 and others) Korloy – various milling and turning inserts Wetec / JD-Tools – ISO plates of various geometries Other manufacturers such as Innotec, Nine9 etc. General features: mixed stock of indexable inserts many original packaging available partly full, partly opened packs Manufacturer mix, mainly branded goods Condition: mostly unused (visible), indiv ...

with nuts. and screw feed The workpieces, max. 100 kg or 25dm³, are stored in the automatic filing machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and sent for separation. Behind the separation is mounted a corresponding transport hose and a blowing air nozzle. Only one workpiece is transported through the transport hose at a time. The electrical interface can be HAN plugs, BUS modules and valve terminals. Workpieces : Press-fit bolt M6 x 15 Max. feeding capacity: 15 screws/minute (1-lane) Maximum filling weight: 100 kg Maximum filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5)

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right Switch Head swivel left/right 90° Spindle protection. incl. toolbox with various tools Drilling capacity in steel25 mm Projection 175 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle holder ISO 30 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 380 mm Table adjustment longitudinal 175 mm Table clamping area 700 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5)

Drilling/milling machine with: • Digital display • Digital depth gauge for quills • Adjustable guides through wedge strips • Large 12-step speed range from 75 - 3200 rpm • Extremely smooth running due to hardened and ground gears running in oil bath • Right-counterclockwise rotation • Prism guides in all axes • Gear head can be swivelled 90° • Chip protection with safety circuit Machine base optional. Not included. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle holder SK 40 Spindle speeds 75 - 3200 rpm Table adjustment transverse 500 mm Table adjustment longitudinal 230 mm Table clamping area 720 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1 kW Machine weight approx. 0.35 t Dimensions approx. 1.1 x 0.9 x 1.2 m Condition: never used / new (5)

2x 1213ETN9 SKF 1x 2208EKTN9/C3 SKF 1x 37X47X4HM4R SKF 58x 51110J9 SKF 1x 7216BECBJ SKF 2x 7216BECBJ SKF 1x AHX2319 SKF 5x ECB208 SKF 1x FRB10/130 SKF 3x FRB10/215 SKF 1x HJ207 SKF 1x HK0808 SKF 2x LAPM2 SKF 4x N307ECP SKF 2x NATR5 SKF 1x NK110/40 SKF 5x NK22/20 SKF 1x NKXR30 SKF 1x NU2304 SKF 1x NU310ECP/C3 SKF 1x NU310ECP/C3 SKF 1x NU324ECJ SKF 1x NU328ECJ/C3 SKF 13x PCM141620E SKF 4x RC-4X4C SKF 2x U203 SKF 1x YAR212-204-2F SKF 1x 1211TV FAG 1x 1306K. TV. C3 FAG 4x 1306K. TV. C3 FAG 1x 21310EK. TVPB FAG 1x 21318EK. TVPB FAG 1x 22212E1K. C3 FAG 1x 22317-E1-XL-C3 FAG 2x 31313A FAG 11x F-45980 INA 6x STO35 INA 2x BAM2012 IKO 2x IRT4030 IKO 1x AHX2319 RHP 2x SFT1.1/4EC RHP 16x NU207E. TVP NKE and more

" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch "additional spindle") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction con ...

Bundle of compression springs for tool and mould making   The pictured cabinet is not part of the offer. Quantity: approx. 112 pieces of storage viewing containers, each filled Content / Description • Extensive collection of compression springs for tool and mould making • Different diameters, lengths and spring thicknesses • Sorted in mixed colour storage viewing containers • Partly labelled (internal article numbers / dimensions) • Material apparently spring steel, suitable for industrial use No individual counting, no measurement, no variety or completeness guarantee Sale exclusively as a complete bundle, no partial sale.   The sale is without a cabinet   Contents: Sorted stock of compression springs for tool and mould making. The springs are labeled according to spring class (light, medium, heavy, extra heavy), outer diameter and free length.  ...

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5)

2× Machine vise BB 120 and 90 mm     •    Design: machine vice     •    Adjustment: manual, degree scale available (with a vice)     •    1× jaw width approx. 120 mm     •    1× jaw width approx. 90 mm     •     Solid cast/steel construction     •    Manual spindle actuation

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version.

1x 1308EKTN9/C3 SKF 5x 2720/QCL7C SKF 9x ASNA510V SKF 10x GLY. PG657030A SKF 9x LUCE16-2LS SKF 1x PCM202315M SKF 1x SY1.3/16TF SKF 1x TSN608C SKF 1x U207 SKF 3x 51316 FAG 1x F-50463 INA 1x G18X26X4 INA 1x NKI9/16TN INA 3x M-ASPF207 NTN 2x 1308K J30 SNR 6x MB0 SNR 1x SC232-532EC SNR 1x UCFE205 SNR 1x 1313KJ NSK 19x SAS20CLZ NSK 310x BAM2416OH IKO 103x BAM2816OH IKO 2x BR324120UU IKO 4x LWL15C2R440CST1H/LR IKO 48x ZE3260LWE25Q IKO 44x 90311-52006 Koyo 30x NI2091 Koyo 60x T01264 Koyo 4x JR12X16X13 Torrington 25x NU303E. TVP. C3 NKE and more

1x BRUB445232AA SKF 4x BRUB445232AA SKF 4x VKBA1938 SKF 4x VKBA3406 SKF 69x VKC2025 SKF 148x VKC2025 SKF 41x VKC2080 SKF 3x VKHB2240 SKF 1x VKM38012 SKF 2x VKPC83420 SKF 1x VKPC84406 SKF 1x VKPC84406 SKF 2x VKPC84600 SKF 1x VKPC85620 SKF 20x F-110096.2 INA 1x F-112201 INA 5x F-45953 INA 10x F-93681 INA 2x BDF395NA01 SNR 10x 48TKA3301 UN3S NSK 5x 48TKB3202 UN3S NSK 1x 55TKA3102A UN3S NSK 1x 22/W2.1/2ND MS44 RHP 38x RCT3157GD2 Koyo and more

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5)

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data Manufac ...

This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good

Technical details Type: Belt conveyor Configuration: Horizontal transport conveyor Drive: Electric motor with worm gearbox (marked VF 72”) Power: Estimated 0.37–1.1 kW Operation: Fixed speed (no inverter visible) Control: Basic electrical control box (on/off) Structure: Steel frame mounted on wheels Belt: Rubber/slat conveyor belt Application: Transport of metal parts, components, or bulk items between machines Equipment - Geared motor unit - Worm gearbox (VF 72 type) - Conveyor belt system - Mobile steel frame - Electrical control box Dimensions and weight (approx.) Length: 3000 mm Width: 600 mm Height: 900 mm Weight: 200 kg Auction-ID: A7-46498-87

A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible.

A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.