cutters and vacuum used for sale

Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm,  ...

Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 50-500ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-100mm | bag size: max. L80-150xW30-100mm | without air pressure | 220V, 1.75kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW900xH1950mm | weight: 480kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediate ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | suitable for volumes from 100-1000ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 50-200mm | bag size: max. L50-250xW50-200mm | without air pressure | 220V, 1.95kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW920xH2050mm | weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fr ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 20-100ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-150mm | bag size: max. L50-220xW30-150mm | without air pressure | 220V, 1.7W | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately  ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 10-50ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fr ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 5-20ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 350kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fro ...

Vertical packaging machine specially designed for the cosmetics industry for the production of round bags and for 4-side sealed double chamber bags. The completely round side sealed bags are produced at 2 pieces per cycle. When changing the bag type, time is needed for changeover, which requires technical experience. A dosing pump for creams, fluids, etc., is included and is selected on the basis of customized product requirements, which results in the respective specifications. PLC LCD touch display from Siemens, automatic program-Set-Up, mark sensor, stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: customized | film roll width: max. 320mm | suitable for composite and single-layer aluminium, PE, BOPP and PP films, paper | max. speed of the machine in neutral: 40 cycles/minute (corresponds to 80 round bags or 40 double chamber ba ...

Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling) | film width: 130-510mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/9.0kW | 6bar, 0.25m?/min | machine dimensions: L1700xW1300xH1700mm | weight: 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for ...

Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling) | film width: 170-560mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/7.5kW | 6bar, 0.25m?/min | machine dimensions: L1500xW1200xH1620mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machine ...

4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from appr ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid) | folds: Z or W shape (change of folding tool necessary) | fold face adjustable per side | dimensions of folded tissue: L(70-100)xW(40-100) mm | dimensions of unfolded tissue: L(1 ...

Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm | suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films | suitable for dry nonwovens (airlaid, spunlaid) | folds: max. 10 folds vertically and 4 folds horizontally | size of tissue, unfolded:L(40-220)xW(30-240)mm | Grammage wet wipe: 30-80g/m? | max. roll diameter: nonwoven: 1000mm, film: 350mm | filling range liqui ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators  ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for mois ...

Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

Single lot consisting of: • N. 6 Imac (years 2018/19, of different configurations) • No. 1PC All in One Dell • No. 1Ipad2 (with case) • No. 1Kyocera ECOSYS P3155DN Printer • No. 2Zebra ZT410 RFID printers • No. 1Zebra GK420T printer (for labels) • No. 2Xerox WorkCentre6515 printers • No. 1OKI B731 Printer • No. 1Xerox Phaser3320 Printer • N. 2 Shredders • No. 1Toshiba Satellite Notebook • Various phone and PC accessories • Various hard drives

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / Year of construction 1972 Groove comb with two thicknesses Perforating comb Functioning Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / year of construction 1972 Grooving tool with two thicknesses Perforating tool Working condition

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

Filling and Depositing machine MINI-FILL 100 - demo-machine, brand-new condition, year of manufacture: 2025 - all-in hopper with built-in impeller system, machine housing made from food-approved plastic, multi-colour-touch screen control panel with adjustment of impeller speed, dosing volume and reverse function, machine suitable for single dosing, automatic dosing with pre-set counter or continous dosing with hand gun, 8 liter-hopper made from food-approved plastic with lid double outlet D = 11,1 mm and 6-teeth gear for semi-liquid, soft and airy products, two pieces injection needle D = 6,52, L = 50 mm, electrical supply: 230V/50Hz/1~, power supply: 100 W

Complete processing cell with robot and ..., IRB 4400/45kg, ABB, used Top Special price ! This system is sold for an absolute special price of only 8% of the purchase price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this processing cell is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. Complete deburring cell from Protex: A workpiece is placed in the processing shaft from the outside. The part is clamped onto the fixture. The robot picks the correct tool from the tool storage location and begins processing. The built-in swivelling table can be used to rotate the workpiece and carry out a further machining step. The chips fall into a  ...

P3 Foam Cleaning for Fillers and Rinsers Pumps and valves in a stainless steel control cabinet Attached control cabinet with Siemens S7 control

200 litre, Stock number: T3941, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg console, Top: Dished, Bottom: Conical, Inner diameter: Ø 570 mm, Outer diameter: D 640 mm, Total height: H 940 mm

500 litre, Stock number: T3651, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: Console for legs/suspension, Top: Open with bolted lid, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, CIP: Yes, Working pressure: 4,5 Bar, Inner diameter: Ø 800 mm, Outer diameter: D 900 mm, Total height: H 1280 mm, Other: Inside coated

500 litre, Stock number: T3649, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open with bolted lid, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, CIP: Yes, Working pressure tank: 0 Bar, Working pressure double jacket: 4,5 Bar, Inner diameter: Ø 800 mm, Outer diameter: D 900 mm, Total height: H 1480 mm, Other: Inside coated

Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, The arbor used for balancing a grinding wheel (often called a balancing pin or mandrel) is a high-precision, ground steel cylinder employed to perform static balancing of the grinding wheel away from the machine., This component allows the flange-and-wheel assembly to be mounted and placed onto a dedicated balancing stand (equipped with either knife-edges or rollers) in order to identify the heaviest point, which can then be corrected using the counterweights on the flange., Information about technical data are not binding., Machine available subject to prior sale.

Filling and packaging plant for vinegar/oil in plastic bottles:, equipped for 0.75 ltr vinegar bottle,, Capacity: up to 4,000 bottles per hour, Consisting of:, 1.Bunker für leere Kunststoffflaschen, ca. 6 m lang, Fassungsvermögen: ca. 400-600 Behälter, 2.Kamman Flaschensortieranlage Typ K23F, The machine ensures that the bottles to be filled are conveyed out of the machine vertically, with the mouth facing upwards, Sorting capacity: approx. 3,000-6,000 pieces/h, 3. Conveyor belts, 4. Lightweight vacuum filler, make Cobert type Olimpia20/95, With 20 filling stations, Dimensions: LxWxH: 1,520x1,250x2,330 mm, Possible bottle diameters: 55-120 mm, Cost 117,000 DM in 1989, 6. Inkjet coder, make REA-JET, year of manufacture 2008, For applying the batch marking or MHD coding to the filled and sealed bottle, 5. Closer for plastic closures, make Zalkin type CA3/320NG, A closing station, Closur ...

HOT-AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. (adjustable width) on the web as per photo, while slitting, Adjustable air-blow to determine the sealed ribbon width Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machine is offered RECONDITIONED and TESTED

Waco planing line HM-225 with bundling and stacking, High speed planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Waco moulder, type HM-225, 9 spindles: B-T-B-R-L-R-L-T-B, max. 120 m/min, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages

Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / Mech.Output 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment  ...

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drying container Piovan 2 x 100 L BJ 1998

Univ. swivel, tilt and turn table presumably DECKELUniversal tool milling machine attachment tableTable size: 700 x 400 mmGroove width: 14 mmGroove spacing: 46 mmMounting plate: width 550 mm x height 300/240 mm- Swivel and tiltable +/- 30- Rotatable 360Weight approx. 140 kg; used

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Univ. swivel, tilt and turn tableAttachment table for Univ. tool barrel machineTable size 630 x 250 mmGroove width 14 mmRotatable and tiltable +/- 30Swivel +/-45- 4x T-grooveWeight approx. 120 kg; used