136,950 used machines on RESALE, but how to find them? Machine Search
Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts
For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
Dräger Evita 2 Dura – Mechanical Fan The Dräger Evita 2 Dura is a medical device used for mechanical ventilation in patients who have difficulty breathing or are unable to breathe adequately on their own. It helps deliver air and oxygen to the lungs, supporting gas exchange and maintaining adequate ventilation. The device is equipped with a digital display that shows important ventilation parameters, such as respiratory rate, tidal volume, airway pressure, and other indicators of respiratory function. The control buttons and adjustment knob allow medical professionals to select and modify ventilation settings according to the patient's needs. The ventilator also includes an alarm system that alerts healthcare staff to potential problems during operation. The Dräger Evita 2 Dura is primarily used in intensive care units and other hospital departments where respiratory suppor ...
Tire mounting machine Attachments New Auction-ID: A3-46141-454
Composite / paving stones to be given cheaply to self-collectors Remaining quantities up to 3 sqm (because there is no more of it) free of charge to self-collectors Remaining quantities from 3 sqm to be given against bid
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6414
Batch consisting of various spindles and guides Auction-ID: A1-50936-161
2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Connection 230V and 400V, Air pressure connection Auction-ID: A3-46142-45
Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...
Philips Respironics V60 Fan – Medical Equipment Manufacturer: Philips Respironics Model: V60 Fan Year of Manufacture: 2012 Configuration: Ventilator mounted on a stand Product Category: Professional Medical Equipment Product Description The Philips Respironics V60 is a non-invasive ventilator designed to provide respiratory support in professional healthcare environments, including hospitals and intensive care units. The device delivers non-invasive ventilation (NIV) to patients requiring respiratory assistance. It features an integrated display and control interface for adjusting ventilation settings and monitoring respiratory parameters, depending on the selected mode and configuration. The ventilator is mounted on a stand for convenient positioning in clinical environments. Available ventilation modes, accessories, breathing circuits, and patient interfaces dep ...
Auction-ID: A3-46142-11349
Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including ...
Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack
Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack
Set of 2 front and 2 rear tires. 280/85 R24 and 420/85R Auction-ID: A3-46141-6297
220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition
Philips Respironics V60 Fan – Medical Equipment Manufacturer: Philips Respironics Model: V60 Fan Year of Manufacture: 2009 Configuration: Ventilator mounted on a stand Product Category: Professional Medical Equipment Product Description The Philips Respironics V60 is a non-invasive ventilator designed to provide respiratory support in professional healthcare environments, including hospitals and intensive care units. The device delivers non-invasive ventilation (NIV) to patients requiring respiratory assistance. It features an integrated display and control interface for adjusting ventilation settings and monitoring respiratory parameters, depending on the selected mode and configuration. The ventilator is mounted on a stand for convenient positioning in clinical environments. Available ventilation modes, accessories, breathing circuits, and patient interfaces dep ...
Auction-ID: A1-51213-27
High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller
Auction-ID: A1-51213-73
Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including ...
Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system
Complete laboratory equipment with work island, workbenches, sinks, boilers and Argon connections Specifications: Product Type: Complete Laboratory Equipment / Laboratory Work Furniture Location: first floor Central laboratory island: approx. 3,400 x 1,500 x 985 mm (L x W x H) Laboratory workbench / desk: approx. 4,500 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 6,010 x 880 x 770 mm (L x W x H) Laboratory workbench / desk: approx. 4,480 x 880 x 770 mm (L x W x H) Number of sinks: 4 Number of Argon Couplings: 13 Features: 1x central laboratory island Various laboratory workbenches / desks 4 sinks Cranes Water heaters 13x Argon coupling Various laboratory connections Pressure regulators with pressure gauges Surface-mounted unit with various connection points Various electrical connections / wall sockets Worksheets Base cabinets Drawer units ...
Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible.
Including 3m, 1.7m and 1.3m long Auction-ID: A1-49565-59
SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...
working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.
Key data: 520 , 9
L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE
Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting
Unused AC motor made bei E.M.G. Italy with 260 Watt power and adapted Cucchi pump
max. grinding diameter:50 mm grinding length:250 mm workpiece length:300 mm total power requirement:0,7 kW weight of the machine ca.:330 kg dimensions of the machine ca.:1000 x 1000 x 1400 mm
maximum number of results exceeded
please refine your search
150 € 
