137,360 used machines on RESALE, but how to find them? Machine Search
Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.
Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret
Lifting jip Inspected for 2026/2027 Auction-ID: A3-46138-19479
specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg
max. workpiece length: 5150 mm profile spindle: 1 Stück main drive: 16 kW Control: Beckhoff CNC Number of axles: 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm, Y = 1500 mm, Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...
Professional commercial freezer AHT Miami 185 (-) L VSAD – a powerful and proven solution for the attractive presentation and reliable storage of frozen products. The AHT Miami series is one of the established refrigerated cabinets in the European food retail sector. Generous panoramic sliding lids allow an optimal view of the goods on offer, while the integrated LED interior lighting ensures a bright and appealing product presentation. With a usable capacity of approx. 533 litres, the chest offers plenty of sales and storage space. Ideally suited for supermarkets, grocery stores, kiosks, petrol stations, restaurants, bakeries, farm shops and professional wholesalers. Special advantages: • Tested and fully functional • Reliable cooling and freezing performance • Ready to use • Plug-in 230 V connection • No separate refrigeration system connection required • Generous ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 3200,5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: --------------------------------------------- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeu ...
max. workpiece length: 3200/5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Commercial Fishing and Aquaculture Nets with Floats Mixed lot of commercial fishing and aquaculture nets, seine-net components, float lines, ropes, synthetic floats and covers. The lot includes bundled netting in red, burgundy and black colours, together with heavy perimeter ropes and numerous yellow and white oval floats. Lot type: Commercial fishing and aquaculture netting Float markings: NYC 8 – Made in Korea” and SANYOUNG S3N” Materials: Synthetic netting, braided ropes and plastic floats Included items: Seine nets, float lines, ropes, floats, cylindrical buoys and covers Approximate lot dimensions: 4,000 x 3,000 x 1,800 mm Approximate total weight: 800 kg The lot contains a substantial quantity of commercial-scale netting and floats suitable for fish containment, harvesting, seine fishing and aquaculture operations. The floats are supplied as part ...
used
Working hours machine: 2616 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg
Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...
turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is an industrial liquefied gas supply system from the manufacturer FAS Flüssiggas-Anlagen GmbH, built/delivered in 2023, consisting of a 62,000-liter storage tank, an electric evaporator system, a propane-air mixing plant and associated control and safety technology. Technical data – LPG tank: Capacity: 62,000 litres (62 m³) Dimensions: Length 13,400 mm × Ø 2,500 mm Empty weight: approx. 12,000 kg Operating pressure: 15.6 bar Maximum fill level: 85 % Maximum propane capacity: approx. 26.8–28.7 t (depending on temperature) Design: horizontal pressure vessel, intended for underground installation Exterior coating: Epoxy Equipment: DN 600 manhole, filling and dispensing fittings, safety valves, content display and overfill protection Evaporator system: 2 electric ADAS dry evaporators Total capacity: max. 330 kg/h Electrical connected load: 48 kW (2 × 24 kW) Power ...
Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph
1 set of 4 pcs. Rim 11x18 IS 25 50% Auction-ID: A1-50849-515
Auction-ID: A1-47394-304
HÄNER HCM500 Concrete Mixing Bucket for Wheel Loaders and Excavators New device Working width: 1970 mm Height: 900 mm Depth: 930 mm Nominal capacity: 500 l Maximum capacity: 550 l Curb weight: 800 kg Concrete weight: 1200 kg Total weight: 2000 kg Required oil volume: 60-150 l/min Maximum pressure range: 240 bar Open/Close Hose Connectors: 1/2 inch Hose Fittings Turn: 1/2 inch Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM500 concrete mixing bucket has the following data and specifications: – Side panels made of 12 mm S355 - Base body made of 10 mm S355 – Mixer screw rings made of wear-resistant HB500; thickness 15 mm – Mixer shaft made of C45 solid steel; diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free-mo ...
Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm ...
Auction-ID: A1-50372-1136
Dimensions (L,W): 1500 x 1400 mm Weight: 110 kg adjustable height (yes/no): ja 0 Ruchser rotary and tilting table RU-4 -------------------------------------------------- ------------ - Basic dimensions 1500 x 1400 mm - Pneumatically tiltable - With support feet - Maximum table width when swung out 3200 mm - Extensions below for widening, incl. wing assembly device - Tool tray - Weatherboard recess and stop for tilting. -------------------------------------------------- ------------ Basic price in the above version on request! Accessories optional, with additional costs: Item 1 RU-GW-SKG Glass trolley with curved sorting comb for easy loading Length 1100 mm, depth 1000 mm, load capacity 900 kg, loading capacity 21 panes, compartment spacing 34 mm, maximum height of sorting comb above set-up area 1000 mm, set-up area with flat board, mobile thanks to 4 plastic swivel castors, Ø 150 mm, 2 ...
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Auction-ID: A1-50849-615
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: - mm profile spindle: - Stück main drive: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 3300; Inspection Date: 2026-10-16; Amount of previous owners: 1; Maximum lift capacity [kg]: 200
Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm
Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long
turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw ...
Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile
Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor
Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units
maximum number of results exceeded
please refine your search
100 € 
