cutters and vacuum used for sale

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...

Seydelmann cutter 65 liter Type: K 65 AC Completely made of special stainless steel 65-liter bowl made 2 knives speed - 1500 / 2950 2 bowl speeds – fast and slow Main cover made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: Width: 120 Depth: 100 Height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Cutter / Cutter / Cutting Mixer / Bowl Cutter Manufacturer: KILIA Type: 65 Ltr. Ex. 3000 RS Equipment: Bowl: stainless steel, 65 litre capacity, designed for approx. 55 kg of sausage meat 2 knife speeds 2 knife speeds for forward mixing cycle 2 knife speeds for reverse mixing 2 bowl speeds electric knife shaft brake Automatic switch-off when the lid is opened Thermometer Potentiometer - Temperature Preselection Noise protection cover Integrated control box Emergency stop button 6 cutter head additionally 2x set of 6 knives including 2 open-end wrenches including instruction manual Stock machine, immediately available! Specifications: 400V / 50 Hz / 51 A / Fuse 63 Amp. sluggish Overall dimensions with lid closed: H120 x W115 x D120 cm Year of construction: 1994 Weight: approx. 1,100 kg Function checked / machin ...

Seydelmann cutter 120 liter Type: K 120 AC 8 Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side The main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine Knives 6 pieces Dimensions: 190x150x180cm Main motor power: 40 kW Voltage: 400 V, 50 Hz Year of production: 2008

Bowl cutter Meissner Type: RSM 325 Condition: Need renovation/used

Bowl Cutter LASKA Type: KR 330-2 Condition: Need renovation/used

Delitech IFOOMA 15 Liter Cutter Stainless Steel used Stainless steel cutter with 3 cutter head and knife shaft brake Two speeds for knife shaft and bowl The bowl is made of solid cast stainless steel and the case is made entirely of stainless steel. Since an auxiliary contactor is currently hanging, the machine does not stay on in 2nd gear. That's why we opened the case and saw the best workmanship here as well. The electronics are also installed in a stainless steel housing, which can be pulled out of the machine on rails to check the fuses, for example. Width: 815mm Depth: 590mm Voltage: 400V Power: 2.4/3kW knife shaft; 0.45/0.55kW bowl drive Knife shaft speed: 1400/2800rpm Bowl speed: 9/18rpm Knives: 3 Bowl volume: 15 liters Weight: 110kg Year of construction: 2016 Machine must be thoroughly cleaned before use. Video about test run available

K+G Wetter Cutter 90 liters SM 90 STL Type 261

Seydelmann K90-DC8 Bowl cutter Serial: 912371 Stainless bowl chopper, 90l capacity, variable speed and timer controls, six blade assembly, with discharge arm, 3Ph

Cutter Seydelmann K 60 U, Machine completely made of stainless steel, 2 speeds, mixing gears, cutter head wrenches, external control box and display, built in 1996, Dimensions LxWxH approx. 160x110x120cm, weight approx. 888kg, good used condition, fully functional, runs smoothly

2 Side-lifts left + right

STANDARD-EQUIPPED

2 Lifts Left and Right.

STANDARD-EQUIPPED

STANDARD-EQUIPPED

STANDARD-EQUIPPED

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

1 MARGASA textile waste cutting machine type CMT 600 rotary cutter, year 1996, working width 600 mm, cutting blade width 610 mm, feeding conveyor 250 cm long, exit conveyor 190 cm long, supplied with blade sharpening table and spare blade

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

Fully equipped line with: Lift, Jogger and Stacker.

with Jogger. -/- STANDARD-EQUIPPED

Lift, Jogger with air-roller, Stacker.

Airtable chromed, 2 side-tables resopal, Baumann NUP-1000 lift, Baumann BASA-3 jogger, Baumann APS-3 Behind-load BFS-3-R, Baumann-Stacker BA-3

1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

Producer: Wolfking Description: Microcutter Wolfking E 160 MAN -Total power 55 KW -Output 6000 kg/h - machine without pump

Type: FPS 40 Capacity 40-60 szt./min Weighting range 11-700 g Width 650 mm Haight 1758 mm Lenght 2876 mm Freqency 400V-3F-50Hz Total power 1,0 kW Air consumption ( 8 bar) 700 l/min Weight 630 kg

Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings

Treif Husky CE dual purpose cutting machine, precise dicing and cutting with one machine, automatic start-up device, cut dices, strips, slices and portions. The machine is currently in the refurbishment and you are very welcome to test the machine at our office in Koblenz, Germany.

Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.

Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.

Stephan MCHD 30-II micro cutter

Magurit frozen meat cutter

Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

Magurit Fromat 042 eco, frozen meat cutter with manual lift, cutting dimensions up to 480mm x 250mm x 750mm, processing temperature -25°C. You are very welcome to test the machine in our facility in Koblenz, Germany.

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 60 -Capaciteit 60 ton -Hydraulic -5 stations -Centraal smeersysteem -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 60 -Capaciteit 60 ton -Hydraulic -5 stations -Achteraanslag electric -Centraal smeersysteem -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Magurit Unicut 555 frozen meat cutter / dicer, with lift, cutting dimensions up to 480 mm x 250 mm x 650 mm, processing temperature -25°C, knife head with 18 knives You are very welcome to test the machine in our facility in Koblenz, Germany.

Karl Schnell KS FD 175 Type 112 Emulsifier, 37 kW, 175 mm, hopper capacity 140 liters, output 2500 kg/h, 2955 rpm. You are very welcome to test the machine in our facility in Koblenz, Germany.

Magurit Fromat 042 frozen meat cutter with lift, cuttung dimensions up to 480 mm x 250 mm x 750 mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.

Magurit Fromat 042 profi frozen meat cutter with lift, cuttung dimensions up to 480mm x 250mm x 750mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4kW. You are very welcome to inspect the machine in our facility in Koblenz, Germany.