cutters and vacuum used for sale

round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details - Manufacturer : Prima - Machine Type: RAPIDO --------------------------------------------------------------- Electrical Specifications - Nominal Voltage: - 3-Phase: 400V - 1-Phase: 230V - Nominal Current: - 3-Phase: 47A - 1-Phase: 27A - Frequency: 50 Hz - Short Circuit Current: 70 kA Find more here - .ucymachines/ Contact us at - sales@ucymachines

round bar steel: 33 mm square edge steel: 30 mm L-beam: 60 x 8 mm hole diameter in sheet thickness: 20 in 13 mm hole punhing press: pressure: 35 t hole punching press: throat: 320 mm hole punching press: max. length of stroke: 24 mm hole punching press: capacity (dia. x thick.): 28 x 10 mm hole punching press: capacity (dia. x thick.): 23 x 12 mm total power requirement: 1,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 32 mm square edge steel: 30 mm L-beam: 80 x 80 x 8 mm : 80 x 13 mm : 36 t throat: 170 mm work stroke: 28 mm work height max.: 980 mm material thickness: 28 x 13 mm hole diameter in sheet thickness: 25x10 / 30x8 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: 4JET Model: Pearl M Year of Manufacture: 2020 - Main Terminal: 400 VAC, 3P/N/PE, 50/60Hz, 63A Laser Specifications: - Laser Model: HyperRapid NX 50 - Wavelength: 1064 nm - Laser Output Max: 80 W - Pulse Energy Max: 1.5 mJ - Pulse Duration Min: 8 ps Application: - Pearl Cut Application: Laser Category 1 Hours 12992 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used TREIF FOX-CE meat chopper

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

- Programm - air table - side table left and right - spare knife

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12 TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5 - OS Platform: Windows NT Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key Specifications - Maximum Sheet Size: 6160 x 2035 mm - X-Axis Travel: 6280 mm - Y-Axis Travel: 2070 mm - Z-Axis Travel: 130 mm - Maximum Sheet Weight on Table: 2400 kg - Table Changeover Time: 48 seconds - Maximum Positioning Speed (X-Y): 140 m/min - Repetitive Accuracy: ±0.025 mm - Positioning Accuracy: ±0.050 mm - Machine Dimensions (L x W x H): 17200 mm x 6300 mm x 3360 mm - Approximate Weight: 21500 kg​ Nitrogen! Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Used-refurbished machine max. 1800 cuts/minute 8-48mm product thickness 2mm cutting accuracy External dimensions (HxWxD): 850x850x1500 mm

SK150 Underused 1500 kg/h capacity -3ºC to -28ºC raw material temperature pneumatic product dispenser Electrical power: 4 kW Electrical connection: 400V, 3F, 50Hz Power consumption: 9,2 A S. air pressure: 4-6 bar Hydraulic pressure: 80 bar Oil capacity: 80 L Cutting force: 25.000 N Dimensions Depth: 1420 mm Width: 996 mm Height: 1635-1700 mm Weight: 580 kg

Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min 

Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mm y-travel: 600 mm z-travel: 700 mm : TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mm square edge steel: 25 mm L-beam: 80 x 80 x 8 mm : 200 x 13 / 350 x 6 mm : 40 t throat: 175 mm work stroke: 32 mm work height max.: 980 mm hole diameter in sheet thickness: 20 x 15 / 38 x 8 mm total power requirement: 3,0 kW weight of the machine ca.: 0,62 t Dimensions (LxWxH): 1,0 x 0,8 x 1,3 0 Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MULTI-PURPOSE CHOP SLICER, HOLAC, TYPE: 26/99 Technical description: Serial number: 290.012.03/1 Material: Stainless steel Power supply: 380-440 V / 50-60 Hz Power: 3,73 kW Dimensions: 2300 x 1050 x 1300 mm

Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - .ucymachines/ Contact us at - sales@ucymachines

Collet chuck SK 30 With milling tool

Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Electric power: 51kW

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Carousel contouring machine with 2 shafts (1 milling and 1 sanding) - Complete with 3-sided cab -Diam. max. machinable mm. 800

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed runs ...

Lathe Centauro Copy lathe Type: T 2 Model: C 140/4 Clamping length 1400 mm Center height 250 mm automatic feed infinitely adjustable feed rate 0 – 1.5 m/min. Spindle speed adjustable via belt Speeds: 900 / 1200 / 1500 / 1800 / 2400 / 3000 rpm. 2 knife holders with bezel with workpiece holder for long workpieces 2 molded steel holders 3 x 3 jaw chuck with a lot of tools Dimensions 3000 mm x 580 mm x H 1260 mm Weight approx. 650 kg

Weight: 3 t x-travel: 1000 mm : 110 milling-head swivable +/-: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 25062 Specifications: - with pressure joining pliers ECKOLD, type MZ + hole punching device - Working pressure infinitely adjustable max. up to 500 bar - Compressive force joining pliers 25 Kn - Single cycle or continuous cycle - Cycle rate infinitely adjustable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Central and lateral air tables Light guards Chromed tables Digital program

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Frozen meat slicer Magurit 152, Electrics and hydraulics completely overhauled, Connection 400V, 4kW, year of construction 1991, Dimensions LxWxH approx. 185x75x138cm, weight approx. 390kg, very good condition, fully functional

Treif Divider CE in good condition

Type : Peddy Year of manufacture : 1974 Specifications: Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg

Max. punching capacity: 800 kN Max. shear capacity: 1100 kN Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With an assortment of stamps and dies as desired

Manufacturer: Messer Griesheim Model: Lasermat 4200 Year of Manufacture: 2011 Type of Machine: Laser Cutting Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rühle Frozen Meat Slicer Type GFR 450 / 250 CW 5.5 Cross cutter 4 pieces

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Advanced programmer Central air table Side tables with air Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Cutting line Rear table cover opens for easy cleaning of the machine Spare knife Chrome table surface anti rust Cutting sticks, operating tools, paper tapping block, documentation. Technical data: Working width 920mm Stack height 120mm Weight 1720 kg 380V power supply Complete cleaned, checked and tested In full working conditions

Manufacturer: ADIGE Model: LT652/B Year of Manufacture: 2002 Machine Description: - Tube laser system LT652, manufactured in 2002. - Equipped with a CO2 laser source with 2 kW power. - Loading length: 6500 mm - Unloading length: 3500 mm The machine is in good technical condition for its age. The cooling system requires occasional maintenance. Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Display - Program - Air table - Side tables - Jogger - Spare knife

Air table Chromed tables Light guards Hydraulic 2 Knives

reus: 8000 min-1 U/min Weight: 5500 kg Year: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mm travel -x axis: 1035 mm travel -y axis: 560 mm travel -z axis: 510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2750x1800x2200 mm Weight: 2500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x730x1380 mm Weight: 350 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x650x450 mm Weight: 40 kg Total power requirement: 0,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x1150 mm Weight: 50 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 33 mm square edge steel: 30 mm L-beam: 60 x 8 mm hole diameter in sheet thickness: 20 in 13 mm hole punhing press: pressure: 35 t hole punching press: throat: 320 mm hole punching press: max. length of stroke: 24 mm hole punching press: capacity (dia. x thick.): 30 x 9 mm hole punching press: capacity (dia. x thick.): 20 x 13 mm total power requirement: 1,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt