cutter k g used for sale

AUTOMATIC MULTI RIP SAW model KUANG YUNG MRS 350 - TAIWAN cast iron machine structure CE regulation: YES with instruction booklet and CE declaration of conformity electric lifting pressure unit automatic lubrication of the carpet Technical details : max.height of cut mm.135 max.working width mm.350 minimum length of cut mm.650 max.diameter of blades mm.405 min.diameter of blades mm.300 arbor sleeve mm.70 main motor power Hp 50 feed motor power Hp 2 motor power lifting pressure group Hp 1 arbor speed rpm 3000 variable carpet advancement speed. from 7.3 to 30 m/min. net weight kgs.2400 volt. 380/50

WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

Fully automatic high-performance die-cutter Renz Kugler 341-2R for calendars and ring binders Technical data – Working width: 500 mm – Format area die-cut side: max. 500 mm – Format area unpunched side: max. 500 mm – Punching thickness: max. 3 mm per layer – Punching speed: 110 cycles – Paper feeding: automatic with non-stop paternoster feeder – Paper delivery: automatic in box delivery with vibrator – Paper grammage: min. 60 gr./m², max. 2 mm (restrictions due to paper grammage/quality are possible) – Register punching: yes (not included) – Interchangeable tools – Tool change requires only a few steps – fast format change thanks to manual adjustment wheels – adjustable edge spacing – Switchable punches – Space requirement: 3.30 x 1.50 m – Net weight 1580 kg

Weight: . kg Year: . content: Rubintastkopf cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

: 370 mm rund : ja : möglich The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOMATIC COLOUR INKING MIXING KITCHEN 31 colors; for TEXTILE INDUSTRY : MAKE : TERMOCOLOR TYPE : ROT YOC : 2003 , refurbished 2012 VALVES : 6 THICKENER & 31 COLOUR, NO. OF VESSELS : 6 COMPUTERISED COLOUR DISPENSING SYSTEM & WEIGHING WITH DRUM TRANSPORTATION & STORAGE

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

1 Karlsruhe cooling tower system with 2 fans Type: KD 2/12 - 34-3 Fabr. No. 7522, power 2,232 KV with complete frame with complete rust removal Shut down End3e 2023, completely on site on the production roof,

Krones VOC can filler with 84 valves, can 211/202, Ferrum F708 seamer 8 heads. Krones Can Filler VOC with 84valves, can type 211/202, with Ferrum Can Seamer with 8 heads.

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter intermediate sleeve reducing sleeve SK40 MK1 M16 -Type: 40 x 1 Dimensions: 60/55/H178 mm -Weight: 0.9 kg

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: Adapter intermediate sleeve reducing sleeve SK40 MK2 M16 -Type: 40x2 -Dimension: 60/55/H178 mm -Weight: 0.9 kg

Control Manual Plus Turning diameter 260 mm Circumferential diameter 475 mm Center width 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parachute holder Tailstock

1 cooling tower system, manufacturer Karlsruhe with 1 fan, type KD2/18-34-3 Engine BG 180C 220 kW with 1,460 rpm Brik No. 8222, power 1200 kW stands on the roof, not dismantled with steel frame and stand frame rust removal Withdrawn from production at the end of 2023

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-31-G -Number: 15x contactors available -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid construction, mobile -Width: 2000mm -Depth: 800 mm -Height: 850mm -Table top: thickness 25 mm -Base: 4 swivel castors, 2x with parking brake -Quantity: 20 pieces -Price per piece -Weight: 51 kg

workbench, work table, assembly bench, assembly table, work table -Manufacturer: Krieg, workbench, solid version -Width: 2500mm -Depth: 800 mm -Height: 755mm -Quantity: 1x workbench available -Weight: 53 kg

Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Manufacturer: Krieg, table trolley with 4 shelves -Load capacity: kg -Chassis: 4 swivel castors -Dimensions: 1200/700/H1210 mm -Weight: 62 kg

Transport trolley, platform trolley, transport trolley, table trolley, assembly trolley -Manufacturer: Krieg, trolley table with 3 shelves -Load capacity: kg -Chassis: 2 swivel casters, 2 fixed casters -Dimensions: 1000/600/H1210 mm -Weight: 43 kg

Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm -Weight: 684 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor -Manufacturer: Parker, sensor closer unused Ovp -Type: KL3183 -Voltage: 10-200V -Number: 112x sensor available -Price per piece -Dimensions rolled up: Ø 90 x 10 mm -Weight: 0.1 kg/piece

used weigher Kemper Consul-ET, in bakery condition, checked and tested, works perfectly, No. 680454, 16 A, 400 V, 50 Hz

Manufacturer: Doleschal Type: Smoking chamber Model: dvoja kolica Productivity: 260 kg/h Height: 3000 mm Width: 1910 mm Length: 2290 mm Voltage: 400V 50Hz 3N Power: 48 kW Main material: Stainlees Steel

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Sideshift, side lift, forklift blade -Manufacturer: Kaup, sideshift type 1T151P2 from forklift Still EFG 1.5/5004 -Load capacity: 1600 kg -Stem dimension: 67 mm -Dimensions: 950/100/H600 mm -Weight: 78 kg

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Shelf tray, drip tray, floor tray, pallet tray, drip container, drip pallet -Manufacturer: Bauer, steel collecting tray, small container tray type KGW2 LB galvanized -Collecting volume: 25 liters -Material: S235JR sheet steel, galvanized, thickness 3 -Dimensions: 940/470/H60 mm -Weight: 21.5 kg

Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

1m x 1m 24 floors 2m high 36 stainless steel gratings with perforated plate 480 x 995 mm

quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data ...

quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for  ...

Koenig and Bauer Alphajet Into Inkjet printer MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Control Heidenhain ... Manual Plus 4110 Turning diameter ... 500mm Turning length ... 1500mm Spindle bore... 82mm Spindle speed ... 0-3000 rpm. Machine weight ... 2500kg L x W x H ... 3092 x 1370 x 1785mm Main engine power ... 17kW Max. workpiece weight ... 1000kg Circumferential diameter via support ... 350mm The machine is in good condition, possible to test under power.